Session

Poster Session WED-PM

West Building Exhibit Halls ABC

Abstract:


001
Highlight
Polarimetric iToF: Measuring High-Fidelity Depth Through Scattering Media

Daniel S. Jeon · Andréas Meuleman · Seung-Hwan Baek · Min H. Kim

Indirect time-of-flight (iToF) imaging allows us to capture dense depth information at a low cost. However, iToF imaging often suffers from multipath interference (MPI) artifacts in the presence of scattering media, resulting in severe depth-accuracy degradation. For instance, iToF cameras cannot measure depth accurately through fog because ToF active illumination scatters back to the sensor before reaching the farther target surface. In this work, we propose a polarimetric iToF imaging method that can capture depth information robustly through scattering media. Our observations on the principle of indirect ToF imaging and polarization of light allow us to formulate a novel computational model of scattering-aware polarimetric phase measurements that enables us to correct MPI errors. We first devise a scattering-aware polarimetric iToF model that can estimate the phase of unpolarized backscattered light. We then combine the optical filtering of polarization and our computational modeling of unpolarized backscattered light via scattering analysis of phase and amplitude. This allows us to tackle the MPI problem by estimating the scattering energy through the participating media. We validate our method on an experimental setup using a customized off-the-shelf iToF camera. Our method outperforms baseline methods by a significant margin by means of our scattering model and polarimetric phase measurements.


002
NeRFLix: High-Quality Neural View Synthesis by Learning a Degradation-Driven Inter-Viewpoint MiXer

Kun Zhou · Wenbo Li · Yi Wang · Tao Hu · Nianjuan Jiang · Xiaoguang Han · Jiangbo Lu

Neural radiance fields(NeRF) show great success in novel-view synthesis. However, in real-world scenes, recovering high-quality details from the source images is still challenging for the existing NeRF-based approaches, due to the potential imperfect calibration information and scene representation inaccuracy. Even with high-quality training frames, the synthetic novel-view frames produced by NeRF models still suffer from notable rendering artifacts, such as noise, blur, etc. Towards to improve the synthesis quality of NeRF-based approaches, we propose NeRFLiX, a general NeRF-agnostic restorer paradigm by learning a degradation-driven inter-viewpoint mixer. Specially, we design a NeRF-style degradation modeling approach and construct large-scale training data, enabling the possibility of effectively removing those NeRF-native rendering artifacts for existing deep neural networks. Moreover, beyond the degradation removal, we propose an inter-viewpoint aggregation framework that is able to fuse highly related high-quality training images, pushing the performance of cutting-edge NeRF models to entirely new levels and producing highly photo-realistic synthetic images.


003
SUDS: Scalable Urban Dynamic Scenes

Haithem Turki · Jason Y. Zhang · Francesco Ferroni · Deva Ramanan

We extend neural radiance fields (NeRFs) to dynamic large-scale urban scenes. Prior work tends to reconstruct single video clips of short durations (up to 10 seconds). Two reasons are that such methods (a) tend to scale linearly with the number of moving objects and input videos because a separate model is built for each and (b) tend to require supervision via 3D bounding boxes and panoptic labels, obtained manually or via category-specific models. As a step towards truly open-world reconstructions of dynamic cities, we introduce two key innovations: (a) we factorize the scene into three separate hash table data structures to efficiently encode static, dynamic, and far-field radiance fields, and (b) we make use of unlabeled target signals consisting of RGB images, sparse LiDAR, off-the-shelf self-supervised 2D descriptors, and most importantly, 2D optical flow. Operationalizing such inputs via photometric, geometric, and feature-metric reconstruction losses enables SUDS to decompose dynamic scenes into the static background, individual objects, and their motions. When combined with our multi-branch table representation, such reconstructions can be scaled to tens of thousands of objects across 1.2 million frames from 1700 videos spanning geospatial footprints of hundreds of kilometers, (to our knowledge) the largest dynamic NeRF built to date. We present qualitative initial results on a variety of tasks enabled by our representations, including novel-view synthesis of dynamic urban scenes, unsupervised 3D instance segmentation, and unsupervised 3D cuboid detection. To compare to prior work, we also evaluate on KITTI and Virtual KITTI 2, surpassing state-of-the-art methods that rely on ground truth 3D bounding box annotations while being 10x quicker to train.


004
DP-NeRF: Deblurred Neural Radiance Field With Physical Scene Priors

Dogyoon Lee · Minhyeok Lee · Chajin Shin · Sangyoun Lee

Neural Radiance Field (NeRF) has exhibited outstanding three-dimensional (3D) reconstruction quality via the novel view synthesis from multi-view images and paired calibrated camera parameters. However, previous NeRF-based systems have been demonstrated under strictly controlled settings, with little attention paid to less ideal scenarios, including with the presence of noise such as exposure, illumination changes, and blur. In particular, though blur frequently occurs in real situations, NeRF that can handle blurred images has received little attention. The few studies that have investigated NeRF for blurred images have not considered geometric and appearance consistency in 3D space, which is one of the most important factors in 3D reconstruction. This leads to inconsistency and the degradation of the perceptual quality of the constructed scene. Hence, this paper proposes a DP-NeRF, a novel clean NeRF framework for blurred images, which is constrained with two physical priors. These priors are derived from the actual blurring process during image acquisition by the camera. DP-NeRF proposes rigid blurring kernel to impose 3D consistency utilizing the physical priors and adaptive weight proposal to refine the color composition error in consideration of the relationship between depth and blur. We present extensive experimental results for synthetic and real scenes with two types of blur: camera motion blur and defocus blur. The results demonstrate that DP-NeRF successfully improves the perceptual quality of the constructed NeRF ensuring 3D geometric and appearance consistency. We further demonstrate the effectiveness of our model with comprehensive ablation analysis.


005
DyLiN: Making Light Field Networks Dynamic

Heng Yu · Joel Julin · Zoltán Á. Milacski · Koichiro Niinuma · László A. Jeni

Light Field Networks, the re-formulations of radiance fields to oriented rays, are magnitudes faster than their coordinate network counterparts, and provide higher fidelity with respect to representing 3D structures from 2D observations. They would be well suited for generic scene representation and manipulation, but suffer from one problem: they are limited to holistic and static scenes. In this paper, we propose the Dynamic Light Field Network (DyLiN) method that can handle non-rigid deformations, including topological changes. We learn a deformation field from input rays to canonical rays, and lift them into a higher dimensional space to handle discontinuities. We further introduce CoDyLiN, which augments DyLiN with controllable attribute inputs. We train both models via knowledge distillation from pretrained dynamic radiance fields. We evaluated DyLiN using both synthetic and real world datasets that include various non-rigid deformations. DyLiN qualitatively outperformed and quantitatively matched state-of-the-art methods in terms of visual fidelity, while being 25 - 71× computationally faster. We also tested CoDyLiN on attribute annotated data and it surpassed its teacher model. Project page: https://dylin2023.github.io.


006
Multi-Space Neural Radiance Fields

Ze-Xin Yin · Jiaxiong Qiu · Ming-Ming Cheng · Bo Ren

Neural Radiance Fields (NeRF) and its variants have reached state-of-the-art performance in many novel-view-synthesis-related tasks. However, current NeRF-based methods still suffer from the existence of reflective objects, often resulting in blurry or distorted rendering. Instead of calculating a single radiance field, we propose a multispace neural radiance field (MS-NeRF) that represents the scene using a group of feature fields in parallel sub-spaces, which leads to a better understanding of the neural network toward the existence of reflective and refractive objects. Our multi-space scheme works as an enhancement to existing NeRF methods, with only small computational overheads needed for training and inferring the extra-space outputs. We demonstrate the superiority and compatibility of our approach using three representative NeRF-based models, i.e., NeRF, Mip-NeRF, and Mip-NeRF 360. Comparisons are performed on a novelly constructed dataset consisting of 25 synthetic scenes and 7 real captured scenes with complex reflection and refraction, all having 360-degree viewpoints. Extensive experiments show that our approach significantly outperforms the existing single-space NeRF methods for rendering high-quality scenes concerned with complex light paths through mirror-like objects.


007
NeRFLight: Fast and Light Neural Radiance Fields Using a Shared Feature Grid

Fernando Rivas-Manzaneque · Jorge Sierra-Acosta · Adrian Penate-Sanchez · Francesc Moreno-Noguer · Angela Ribeiro

While original Neural Radiance Fields (NeRF) have shown impressive results in modeling the appearance of a scene with compact MLP architectures, they are not able to achieve real-time rendering. This has been recently addressed by either baking the outputs of NeRF into a data structure or arranging trainable parameters in an explicit feature grid. These strategies, however, significantly increase the memory footprint of the model which prevents their deployment on bandwidth-constrained applications. In this paper, we extend the grid-based approach to achieve real-time view synthesis at more than 150 FPS using a lightweight model. Our main contribution is a novel architecture in which the density field of NeRF-based representations is split into N regions and the density is modeled using N different decoders which reuse the same feature grid. This results in a smaller grid where each feature is located in more than one spatial position, forcing them to learn a compact representation that is valid for different parts of the scene. We further reduce the size of the final model by disposing of the features symmetrically on each region, which favors feature pruning after training while also allowing smooth gradient transitions between neighboring voxels. An exhaustive evaluation demonstrates that our method achieves real-time performance and quality metrics on a pair with state-of-the-art with an improvement of more than 2x in the FPS/MB ratio.


008
Cross-Guided Optimization of Radiance Fields With Multi-View Image Super-Resolution for High-Resolution Novel View Synthesis

Youngho Yoon · Kuk-Jin Yoon

Novel View Synthesis (NVS) aims at synthesizing an image from an arbitrary viewpoint using multi-view images and camera poses. Among the methods for NVS, Neural Radiance Fields (NeRF) is capable of NVS for an arbitrary resolution as it learns a continuous volumetric representation. However, radiance fields rely heavily on the spectral characteristics of coordinate-based networks. Thus, there is a limit to improving the performance of high-resolution novel view synthesis (HRNVS). To solve this problem, we propose a novel framework using cross-guided optimization of the single-image super-resolution (SISR) and radiance fields. We perform multi-view image super-resolution (MVSR) on train-view images during the radiance fields optimization process. It derives the updated SR result by fusing the feature map obtained from SISR and voxel-based uncertainty fields generated by integrated errors of train-view images. By repeating the updates during radiance fields optimization, train-view images for radiance fields optimization have multi-view consistency and high-frequency details simultaneously, ultimately improving the performance of HRNVS. Experiments of HRNVS and MVSR on various benchmark datasets show that the proposed method significantly surpasses existing methods.


009
NeuralEditor: Editing Neural Radiance Fields via Manipulating Point Clouds

Jun-Kun Chen · Jipeng Lyu · Yu-Xiong Wang

This paper proposes NeuralEditor that enables neural radiance fields (NeRFs) natively editable for general shape editing tasks. Despite their impressive results on novel-view synthesis, it remains a fundamental challenge for NeRFs to edit the shape of the scene. Our key insight is to exploit the explicit point cloud representation as the underlying structure to construct NeRFs, inspired by the intuitive interpretation of NeRF rendering as a process that projects or “plots” the associated 3D point cloud to a 2D image plane. To this end, NeuralEditor introduces a novel rendering scheme based on deterministic integration within K-D tree-guided density-adaptive voxels, which produces both high-quality rendering results and precise point clouds through optimization. NeuralEditor then performs shape editing via mapping associated points between point clouds. Extensive evaluation shows that NeuralEditor achieves state-of-the-art performance in both shape deformation and scene morphing tasks. Notably, NeuralEditor supports both zero-shot inference and further fine-tuning over the edited scene. Our code, benchmark, and demo video are available at https://immortalco.github.io/NeuralEditor.


010
DINER: Depth-Aware Image-Based NEural Radiance Fields

Malte Prinzler · Otmar Hilliges · Justus Thies

We present Depth-aware Image-based NEural Radiance fields (DINER). Given a sparse set of RGB input views, we predict depth and feature maps to guide the reconstruction of a volumetric scene representation that allows us to render 3D objects under novel views. Specifically, we propose novel techniques to incorporate depth information into feature fusion and efficient scene sampling. In comparison to the previous state of the art, DINER achieves higher synthesis quality and can process input views with greater disparity. This allows us to capture scenes more completely without changing capturing hardware requirements and ultimately enables larger viewpoint changes during novel view synthesis. We evaluate our method by synthesizing novel views, both for human heads and for general objects, and observe significantly improved qualitative results and increased perceptual metrics compared to the previous state of the art.


011
Modernizing Old Photos Using Multiple References via Photorealistic Style Transfer

Agus Gunawan · Soo Ye Kim · Hyeonjun Sim · Jae-Ho Lee · Munchurl Kim

This paper firstly presents old photo modernization using multiple references by performing stylization and enhancement in a unified manner. In order to modernize old photos, we propose a novel multi-reference-based old photo modernization (MROPM) framework consisting of a network MROPM-Net and a novel synthetic data generation scheme. MROPM-Net stylizes old photos using multiple references via photorealistic style transfer (PST) and further enhances the results to produce modern-looking images. Meanwhile, the synthetic data generation scheme trains the network to effectively utilize multiple references to perform modernization. To evaluate the performance, we propose a new old photos benchmark dataset (CHD) consisting of diverse natural indoor and outdoor scenes. Extensive experiments show that the proposed method outperforms other baselines in performing modernization on real old photos, even though no old photos were used during training. Moreover, our method can appropriately select styles from multiple references for each semantic region in the old photo to further improve the modernization performance.


012
Efficient Map Sparsification Based on 2D and 3D Discretized Grids

Xiaoyu Zhang · Yun-Hui Liu

Localization in a pre-built map is a basic technique for robot autonomous navigation. Existing mapping and localization methods commonly work well in small-scale environments. As a map grows larger, however, more memory is required and localization becomes inefficient. To solve these problems, map sparsification becomes a practical necessity to acquire a subset of the original map for localization. Previous map sparsification methods add a quadratic term in mixed-integer programming to enforce a uniform distribution of selected landmarks, which requires high memory capacity and heavy computation. In this paper, we formulate map sparsification in an efficient linear form and select uniformly distributed landmarks based on 2D discretized grids. Furthermore, to reduce the influence of different spatial distributions between the mapping and query sequences, which is not considered in previous methods, we also introduce a space constraint term based on 3D discretized grids. The exhaustive experiments in different datasets demonstrate the superiority of the proposed methods in both efficiency and localization performance. The relevant codes will be released at https://github.com/fishmarch/SLAMMapCompression.


013
K-Planes: Explicit Radiance Fields in Space, Time, and Appearance

Sara Fridovich-Keil · Giacomo Meanti · Frederik Rahbæk Warburg · Benjamin Recht · Angjoo Kanazawa

We introduce k-planes, a white-box model for radiance fields in arbitrary dimensions. Our model uses d-choose-2 planes to represent a d-dimensional scene, providing a seamless way to go from static (d=3) to dynamic (d=4) scenes. This planar factorization makes adding dimension-specific priors easy, e.g. temporal smoothness and multi-resolution spatial structure, and induces a natural decomposition of static and dynamic components of a scene. We use a linear feature decoder with a learned color basis that yields similar performance as a nonlinear black-box MLP decoder. Across a range of synthetic and real, static and dynamic, fixed and varying appearance scenes, k-planes yields competitive and often state-of-the-art reconstruction fidelity with low memory usage, achieving 1000x compression over a full 4D grid, and fast optimization with a pure PyTorch implementation. For video results and code, please see sarafridov.github.io/K-Planes.


014
I2-SDF: Intrinsic Indoor Scene Reconstruction and Editing via Raytracing in Neural SDFs

Jingsen Zhu · Yuchi Huo · Qi Ye · Fujun Luan · Jifan Li · Dianbing Xi · Lisha Wang · Rui Tang · Wei Hua · Hujun Bao · Rui Wang

In this work, we present I^2-SDF, a new method for intrinsic indoor scene reconstruction and editing using differentiable Monte Carlo raytracing on neural signed distance fields (SDFs). Our holistic neural SDF-based framework jointly recovers the underlying shapes, incident radiance and materials from multi-view images. We introduce a novel bubble loss for fine-grained small objects and error-guided adaptive sampling scheme to largely improve the reconstruction quality on large-scale indoor scenes. Further, we propose to decompose the neural radiance field into spatially-varying material of the scene as a neural field through surface-based, differentiable Monte Carlo raytracing and emitter semantic segmentations, which enables physically based and photorealistic scene relighting and editing applications. Through a number of qualitative and quantitative experiments, we demonstrate the superior quality of our method on indoor scene reconstruction, novel view synthesis, and scene editing compared to state-of-the-art baselines. Our project page is at https://jingsenzhu.github.io/i2-sdf.


015
Multi-View Inverse Rendering for Large-Scale Real-World Indoor Scenes

Zhen Li · Lingli Wang · Mofang Cheng · Cihui Pan · Jiaqi Yang

We present a efficient multi-view inverse rendering method for large-scale real-world indoor scenes that reconstructs global illumination and physically-reasonable SVBRDFs. Unlike previous representations, where the global illumination of large scenes is simplified as multiple environment maps, we propose a compact representation called Texture-based Lighting (TBL). It consists of 3D mesh and HDR textures, and efficiently models direct and infinite-bounce indirect lighting of the entire large scene. Based on TBL, we further propose a hybrid lighting representation with precomputed irradiance, which significantly improves the efficiency and alleviates the rendering noise in the material optimization. To physically disentangle the ambiguity between materials, we propose a three-stage material optimization strategy based on the priors of semantic segmentation and room segmentation. Extensive experiments show that the proposed method outperforms the state-of-the-art quantitatively and qualitatively, and enables physically-reasonable mixed-reality applications such as material editing, editable novel view synthesis and relighting. The project page is at https://lzleejean.github.io/TexIR.


016
Inverse Rendering of Translucent Objects Using Physical and Neural Renderers

Chenhao Li · Trung Thanh Ngo · Hajime Nagahara

In this work, we propose an inverse rendering model that estimates 3D shape, spatially-varying reflectance, homogeneous subsurface scattering parameters, and an environment illumination jointly from only a pair of captured images of a translucent object. In order to solve the ambiguity problem of inverse rendering, we use a physically-based renderer and a neural renderer for scene reconstruction and material editing. Because two renderers are differentiable, we can compute a reconstruction loss to assist parameter estimation. To enhance the supervision of the proposed neural renderer, we also propose an augmented loss. In addition, we use a flash and no-flash image pair as the input. To supervise the training, we constructed a large-scale synthetic dataset of translucent objects, which consists of 117K scenes. Qualitative and quantitative results on both synthetic and real-world datasets demonstrated the effectiveness of the proposed model.


017
Accidental Light Probes

Hong-Xing Yu · Samir Agarwala · Charles Herrmann · Richard Szeliski · Noah Snavely · Jiajun Wu · Deqing Sun

Recovering lighting in a scene from a single image is a fundamental problem in computer vision. While a mirror ball light probe can capture omnidirectional lighting, light probes are generally unavailable in everyday images. In this work, we study recovering lighting from accidental light probes (ALPs)---common, shiny objects like Coke cans, which often accidentally appear in daily scenes. We propose a physically-based approach to model ALPs and estimate lighting from their appearances in single images. The main idea is to model the appearance of ALPs by photogrammetrically principled shading and to invert this process via differentiable rendering to recover incidental illumination. We demonstrate that we can put an ALP into a scene to allow high-fidelity lighting estimation. Our model can also recover lighting for existing images that happen to contain an ALP.


018
Humans As Light Bulbs: 3D Human Reconstruction From Thermal Reflection

Ruoshi Liu · Carl Vondrick

The relatively hot temperature of the human body causes people to turn into long-wave infrared light sources. Since this emitted light has a larger wavelength than visible light, many surfaces in typical scenes act as infrared mirrors with strong specular reflections. We exploit the thermal reflections of a person onto objects in order to locate their position and reconstruct their pose, even if they are not visible to a normal camera. We propose an analysis-by-synthesis framework that jointly models the objects, people, and their thermal reflections, which allows us to combine generative models with differentiable rendering of reflections. Quantitative and qualitative experiments show our approach works in highly challenging cases, such as with curved mirrors or when the person is completely unseen by a normal camera.


019
HumanGen: Generating Human Radiance Fields With Explicit Priors

Suyi Jiang · Haoran Jiang · Ziyu Wang · Haimin Luo · Wenzheng Chen · Lan Xu

Recent years have witnessed the tremendous progress of 3D GANs for generating view-consistent radiance fields with photo-realism. Yet, high-quality generation of human radiance fields remains challenging, partially due to the limited human-related priors adopted in existing methods. We present HumanGen, a novel 3D human generation scheme with detailed geometry and 360° realistic free-view rendering. It explicitly marries the 3D human generation with various priors from the 2D generator and 3D reconstructor of humans through the design of “anchor image”. We introduce a hybrid feature representation using the anchor image to bridge the latent space of HumanGen with the existing 2D generator. We then adopt a pronged design to disentangle the generation of geometry and appearance. With the aid of the anchor image, we adapt a 3D reconstructor for fine-grained details synthesis and propose a two-stage blending scheme to boost appearance generation. Extensive experiments demonstrate our effectiveness for state-of-the-art 3D human generation regarding geometry details, texture quality, and free-view performance. Notably, HumanGen can also incorporate various off-the-shelf 2D latent editing methods, seamlessly lifting them into 3D.


020
Seeing Through the Glass: Neural 3D Reconstruction of Object Inside a Transparent Container

Jinguang Tong · Sundaram Muthu · Fahira Afzal Maken · Chuong Nguyen · Hongdong Li

In this paper, we define a new problem of recovering the 3D geometry of an object confined in a transparent enclosure. We also propose a novel method for solving this challenging problem. Transparent enclosures pose challenges of multiple light reflections and refractions at the interface between different propagation media e.g. air or glass. These multiple reflections and refractions cause serious image distortions which invalidate the single viewpoint assumption. Hence the 3D geometry of such objects cannot be reliably reconstructed using existing methods, such as traditional structure from motion or modern neural reconstruction methods. We solve this problem by explicitly modeling the scene as two distinct sub-spaces, inside and outside the transparent enclosure. We use an existing neural reconstruction method (NeuS) that implicitly represents the geometry and appearance of the inner subspace. In order to account for complex light interactions, we develop a hybrid rendering strategy that combines volume rendering with ray tracing. We then recover the underlying geometry and appearance of the model by minimizing the difference between the real and rendered images. We evaluate our method on both synthetic and real data. Experiment results show that our method outperforms the state-of-the-art (SOTA) methods. Codes and data will be available at https://github.com/hirotong/ReNeuS


021
3D Shape Reconstruction of Semi-Transparent Worms

Thomas P. Ilett · Omer Yuval · Thomas Ranner · Netta Cohen · David C. Hogg

3D shape reconstruction typically requires identifying object features or textures in multiple images of a subject. This approach is not viable when the subject is semi-transparent and moving in and out of focus. Here we overcome these challenges by rendering a candidate shape with adaptive blurring and transparency for comparison with the images. We use the microscopic nematode Caenorhabditis elegans as a case study as it freely explores a 3D complex fluid with constantly changing optical properties. We model the slender worm as a 3D curve using an intrinsic parametrisation that naturally admits biologically-informed constraints and regularisation. To account for the changing optics we develop a novel differentiable renderer to construct images from 2D projections and compare against raw images to generate a pixel-wise error to jointly update the curve, camera and renderer parameters using gradient descent. The method is robust to interference such as bubbles and dirt trapped in the fluid, stays consistent through complex sequences of postures, recovers reliable estimates from blurry images and provides a significant improvement on previous attempts to track C. elegans in 3D. Our results demonstrate the potential of direct approaches to shape estimation in complex physical environments in the absence of ground-truth data.


022
Dionysus: Recovering Scene Structures by Dividing Into Semantic Pieces

Likang Wang · Lei Chen

Most existing 3D reconstruction methods result in either detail loss or unsatisfying efficiency. However, effectiveness and efficiency are equally crucial in real-world applications, e.g., autonomous driving and augmented reality. We argue that this dilemma comes from wasted resources on valueless depth samples. This paper tackles the problem by proposing a novel learning-based 3D reconstruction framework named Dionysus. Our main contribution is to find out the most promising depth candidates from estimated semantic maps. This strategy simultaneously enables high effectiveness and efficiency by attending to the most reliable nominators. Specifically, we distinguish unreliable depth candidates by checking the cross-view semantic consistency and allow adaptive sampling by redistributing depth nominators among pixels. Experiments on the most popular datasets confirm our proposed framework’s effectiveness.


023
SparseFusion: Distilling View-Conditioned Diffusion for 3D Reconstruction

Zhizhuo Zhou · Shubham Tulsiani

We propose SparseFusion, a sparse view 3D reconstruction approach that unifies recent advances in neural rendering and probabilistic image generation. Existing approaches typically build on neural rendering with re-projected features but fail to generate unseen regions or handle uncertainty under large viewpoint changes. Alternate methods treat this as a (probabilistic) 2D synthesis task, and while they can generate plausible 2D images, they do not infer a consistent underlying 3D. However, we find that this trade-off between 3D consistency and probabilistic image generation does not need to exist. In fact, we show that geometric consistency and generative inference can be complementary in a mode seeking behavior. By distilling a 3D consistent scene representation from a view-conditioned latent diffusion model, we are able to recover a plausible 3D representation whose renderings are both accurate and realistic. We evaluate our approach across 51 categories in the CO3D dataset and show that it outperforms existing methods, in both distortion and perception metrics, for sparse view novel view synthesis.


024
PET-NeuS: Positional Encoding Tri-Planes for Neural Surfaces

Yiqun Wang · Ivan Skorokhodov · Peter Wonka

A signed distance function (SDF) parametrized by an MLP is a common ingredient of neural surface reconstruction. We build on the successful recent method NeuS to extend it by three new components. The first component is to borrow the tri-plane representation from EG3D and represent signed distance fields as a mixture of tri-planes and MLPs instead of representing it with MLPs only. Using tri-planes leads to a more expressive data structure but will also introduce noise in the reconstructed surface. The second component is to use a new type of positional encoding with learnable weights to combat noise in the reconstruction process. We divide the features in the tri-plane into multiple frequency scales and modulate them with sin and cos functions of different frequencies. The third component is to use learnable convolution operations on the tri-plane features using self-attention convolution to produce features with different frequency bands. The experiments show that PET-NeuS achieves high-fidelity surface reconstruction on standard datasets. Following previous work and using the Chamfer metric as the most important way to measure surface reconstruction quality, we are able to improve upon the NeuS baseline by 57% on Nerf-synthetic (0.84 compared to 1.97) and by 15.5% on DTU (0.71 compared to 0.84). The qualitative evaluation reveals how our method can better control the interference of high-frequency noise.


025
RenderDiffusion: Image Diffusion for 3D Reconstruction, Inpainting and Generation

Titas Anciukevičius · Zexiang Xu · Matthew Fisher · Paul Henderson · Hakan Bilen · Niloy J. Mitra · Paul Guerrero

Diffusion models currently achieve state-of-the-art performance for both conditional and unconditional image generation. However, so far, image diffusion models do not support tasks required for 3D understanding, such as view-consistent 3D generation or single-view object reconstruction. In this paper, we present RenderDiffusion, the first diffusion model for 3D generation and inference, trained using only monocular 2D supervision. Central to our method is a novel image denoising architecture that generates and renders an intermediate three-dimensional representation of a scene in each denoising step. This enforces a strong inductive structure within the diffusion process, providing a 3D consistent representation while only requiring 2D supervision. The resulting 3D representation can be rendered from any view. We evaluate RenderDiffusion on FFHQ, AFHQ, ShapeNet and CLEVR datasets, showing competitive performance for generation of 3D scenes and inference of 3D scenes from 2D images. Additionally, our diffusion-based approach allows us to use 2D inpainting to edit 3D scenes.


026
Score Jacobian Chaining: Lifting Pretrained 2D Diffusion Models for 3D Generation

Haochen Wang · Xiaodan Du · Jiahao Li · Raymond A. Yeh · Greg Shakhnarovich

A diffusion model learns to predict a vector field of gradients. We propose to apply chain rule on the learned gradients, and back-propagate the score of a diffusion model through the Jacobian of a differentiable renderer, which we instantiate to be a voxel radiance field. This setup aggregates 2D scores at multiple camera viewpoints into a 3D score, and repurposes a pretrained 2D model for 3D data generation. We identify a technical challenge of distribution mismatch that arises in this application, and propose a novel estimation mechanism to resolve it. We run our algorithm on several off-the-shelf diffusion image generative models, including the recently released Stable Diffusion trained on the large-scale LAION dataset.


027
Infinite Photorealistic Worlds Using Procedural Generation

Alexander Raistrick · Lahav Lipson · Zeyu Ma · Lingjie Mei · Mingzhe Wang · Yiming Zuo · Karhan Kayan · Hongyu Wen · Beining Han · Yihan Wang · Alejandro Newell · Hei Law · Ankit Goyal · Kaiyu Yang · Jia Deng

We introduce Infinigen, a procedural generator of photorealistic 3D scenes of the natural world. Infinigen is entirely procedural: every asset, from shape to texture, is generated from scratch via randomized mathematical rules, using no external source and allowing infinite variation and composition. Infinigen offers broad coverage of objects and scenes in the natural world including plants, animals, terrains, and natural phenomena such as fire, cloud, rain, and snow. Infinigen can be used to generate unlimited, diverse training data for a wide range of computer vision tasks including object detection, semantic segmentation, optical flow, and 3D reconstruction. We expect Infinigen to be a useful resource for computer vision research and beyond. Please visit https://infinigen.org for videos, code and pre-generated data.


028
Diffusion-SDF: Text-To-Shape via Voxelized Diffusion

Muheng Li · Yueqi Duan · Jie Zhou · Jiwen Lu

With the rising industrial attention to 3D virtual modeling technology, generating novel 3D content based on specified conditions (e.g. text) has become a hot issue. In this paper, we propose a new generative 3D modeling framework called Diffusion-SDF for the challenging task of text-to-shape synthesis. Previous approaches lack flexibility in both 3D data representation and shape generation, thereby failing to generate highly diversified 3D shapes conforming to the given text descriptions. To address this, we propose a SDF autoencoder together with the Voxelized Diffusion model to learn and generate representations for voxelized signed distance fields (SDFs) of 3D shapes. Specifically, we design a novel UinU-Net architecture that implants a local-focused inner network inside the standard U-Net architecture, which enables better reconstruction of patch-independent SDF representations. We extend our approach to further text-to-shape tasks including text-conditioned shape completion and manipulation. Experimental results show that Diffusion-SDF generates both higher quality and more diversified 3D shapes that conform well to given text descriptions when compared to previous approaches. Code is available at: https://github.com/ttlmh/Diffusion-SDF.


029
3D-Aware Multi-Class Image-to-Image Translation With NeRFs

Senmao Li · Joost van de Weijer · Yaxing Wang · Fahad Shahbaz Khan · Meiqin Liu · Jian Yang

Recent advances in 3D-aware generative models (3D-aware GANs) combined with Neural Radiance Fields (NeRF) have achieved impressive results. However no prior works investigate 3D-aware GANs for 3D consistent multi-class image-to-image (3D-aware I2I) translation. Naively using 2D-I2I translation methods suffers from unrealistic shape/identity change. To perform 3D-aware multi-class I2I translation, we decouple this learning process into a multi-class 3D-aware GAN step and a 3D-aware I2I translation step. In the first step, we propose two novel techniques: a new conditional architecture and an effective training strategy. In the second step, based on the well-trained multi-class 3D-aware GAN architecture, that preserves view-consistency, we construct a 3D-aware I2I translation system. To further reduce the view-consistency problems, we propose several new techniques, including a U-net-like adaptor network design, a hierarchical representation constrain and a relative regularization loss. In extensive experiments on two datasets, quantitative and qualitative results demonstrate that we successfully perform 3D-aware I2I translation with multi-view consistency.


030
Latent-NeRF for Shape-Guided Generation of 3D Shapes and Textures

Gal Metzer · Elad Richardson · Or Patashnik · Raja Giryes · Daniel Cohen-Or

Text-guided image generation has progressed rapidly in recent years, inspiring major breakthroughs in text-guided shape generation. Recently, it has been shown that using score distillation, one can successfully text-guide a NeRF model to generate a 3D object. We adapt the score distillation to the publicly available, and computationally efficient, Latent Diffusion Models, which apply the entire diffusion process in a compact latent space of a pretrained autoencoder. As NeRFs operate in image space, a naive solution for guiding them with latent score distillation would require encoding to the latent space at each guidance step. Instead, we propose to bring the NeRF to the latent space, resulting in a Latent-NeRF. Analyzing our Latent-NeRF, we show that while Text-to-3D models can generate impressive results, they are inherently unconstrained and may lack the ability to guide or enforce a specific 3D structure. To assist and direct the 3D generation, we propose to guide our Latent-NeRF using a Sketch-Shape: an abstract geometry that defines the coarse structure of the desired object. Then, we present means to integrate such a constraint directly into a Latent-NeRF. This unique combination of text and shape guidance allows for increased control over the generation process. We also show that latent score distillation can be successfully applied directly on 3D meshes. This allows for generating high-quality textures on a given geometry. Our experiments validate the power of our different forms of guidance and the efficiency of using latent rendering.


031
Local 3D Editing via 3D Distillation of CLIP Knowledge

Junha Hyung · Sungwon Hwang · Daejin Kim · Hyunji Lee · Jaegul Choo

3D content manipulation is an important computer vision task with many real-world applications (e.g., product design, cartoon generation, and 3D Avatar editing). Recently proposed 3D GANs can generate diverse photo-realistic 3D-aware contents using Neural Radiance fields (NeRF). However, manipulation of NeRF still remains a challenging problem since the visual quality tends to degrade after manipulation and suboptimal control handles such as semantic maps are used for manipulations. While text-guided manipulations have shown potential in 3D editing, such approaches often lack locality. To overcome the problems, we propose Local Editing NeRF (LENeRF), which only requires text inputs for fine-grained and localized manipulation. Specifically, we present three add-on modules of LENeRF, the Latent Residual Mapper, the Attention Field Network, and the Deformation Network, which are jointly used for local manipulations of 3D features by estimating a 3D attention field. The 3D attention field is learned in an unsupervised way, by distilling the CLIP’s zero-shot mask generation capability to 3D with multi-view guidance. We conduct diverse experiments and thorough evaluations both quantitatively and qualitatively.


032
ShapeTalk: A Language Dataset and Framework for 3D Shape Edits and Deformations

Panos Achlioptas · Ian Huang · Minhyuk Sung · Sergey Tulyakov · Leonidas Guibas

Editing 3D geometry is a challenging task requiring specialized skills. In this work, we aim to facilitate the task of editing the geometry of 3D models through the use of natural language. For example, we may want to modify a 3D chair model to “make its legs thinner” or to “open a hole in its back”. To tackle this problem in a manner that promotes open-ended language use and enables fine-grained shape edits, we introduce the most extensive existing corpus of natural language utterances describing shape differences: ShapeTalk. ShapeTalk contains over half a million discriminative utterances produced by contrasting the shapes of common 3D objects for a variety of object classes and degrees of similarity. We also introduce a generic framework, ChangeIt3D, which builds on ShapeTalk and can use an arbitrary 3D generative model of shapes to produce edits that align the output better with the edit or deformation description. Finally, we introduce metrics for the quantitative evaluation of language-assisted shape editing methods that reflect key desiderata within this editing setup. We note that ShapeTalk allows methods to be trained with explicit 3D-to-language data, bypassing the necessity of “lifting” 2D to 3D using methods like neural rendering, as required by extant 2D image-language foundation models. Our code and data are publicly available at https://changeit3d.github.io/.


033
CoralStyleCLIP: Co-Optimized Region and Layer Selection for Image Editing

Ambareesh Revanur · Debraj Basu · Shradha Agrawal · Dhwanit Agarwal · Deepak Pai

Edit fidelity is a significant issue in open-world controllable generative image editing. Recently, CLIP-based approaches have traded off simplicity to alleviate these problems by introducing spatial attention in a handpicked layer of a StyleGAN. In this paper, we propose CoralStyleCLIP, which incorporates a multi-layer attention-guided blending strategy in the feature space of StyleGAN2 for obtaining high-fidelity edits. We propose multiple forms of our co-optimized region and layer selection strategy to demonstrate the variation of time complexity with the quality of edits over different architectural intricacies while preserving simplicity. We conduct extensive experimental analysis and benchmark our method against state-of-the-art CLIP-based methods. Our findings suggest that CoralStyleCLIP results in high-quality edits while preserving the ease of use.


034
3D-Aware Face Swapping

Yixuan Li · Chao Ma · Yichao Yan · Wenhan Zhu · Xiaokang Yang

Face swapping is an important research topic in computer vision with wide applications in entertainment and privacy protection. Existing methods directly learn to swap 2D facial images, taking no account of the geometric information of human faces. In the presence of large pose variance between the source and the target faces, there always exist undesirable artifacts on the swapped face. In this paper, we present a novel 3D-aware face swapping method that generates high-fidelity and multi-view-consistent swapped faces from single-view source and target images. To achieve this, we take advantage of the strong geometry and texture prior of 3D human faces, where the 2D faces are projected into the latent space of a 3D generative model. By disentangling the identity and attribute features in the latent space, we succeed in swapping faces in a 3D-aware manner, being robust to pose variations while transferring fine-grained facial details. Extensive experiments demonstrate the superiority of our 3D-aware face swapping framework in terms of visual quality, identity similarity, and multi-view consistency. Code is available at https://lyx0208.github.io/3dSwap.


035
DCFace: Synthetic Face Generation With Dual Condition Diffusion Model

Minchul Kim · Feng Liu · Anil Jain · Xiaoming Liu

Generating synthetic datasets for training face recognition models is challenging because dataset generation entails more than creating high fidelity images. It involves generating multiple images of same subjects under different factors (e.g., variations in pose, illumination, expression, aging and occlusion) which follows the real image conditional distribution. Previous works have studied the generation of synthetic datasets using GAN or 3D models. In this work, we approach the problem from the aspect of combining subject appearance (ID) and external factor (style) conditions. These two conditions provide a direct way to control the inter-class and intra-class variations. To this end, we propose a Dual Condition Face Generator (DCFace) based on a diffusion model. Our novel Patch-wise style extractor and Time-step dependent ID loss enables DCFace to consistently produce face images of the same subject under different styles with precise control. Face recognition models trained on synthetic images from the proposed DCFace provide higher verification accuracies compared to previous works by 6.11% on average in 4 out of 5 test datasets, LFW, CFP-FP, CPLFW, AgeDB and CALFW. Model, code, and synthetic dataset are available at https://github.com/mk-minchul/dcface


036
Highlight
HairStep: Transfer Synthetic to Real Using Strand and Depth Maps for Single-View 3D Hair Modeling

Yujian Zheng · Zirong Jin · Moran Li · Haibin Huang · Chongyang Ma · Shuguang Cui · Xiaoguang Han

In this work, we tackle the challenging problem of learning-based single-view 3D hair modeling. Due to the great difficulty of collecting paired real image and 3D hair data, using synthetic data to provide prior knowledge for real domain becomes a leading solution. This unfortunately introduces the challenge of domain gap. Due to the inherent difficulty of realistic hair rendering, existing methods typically use orientation maps instead of hair images as input to bridge the gap. We firmly think an intermediate representation is essential, but we argue that orientation map using the dominant filtering-based methods is sensitive to uncertain noise and far from a competent representation. Thus, we first raise this issue up and propose a novel intermediate representation, termed as HairStep, which consists of a strand map and a depth map. It is found that HairStep not only provides sufficient information for accurate 3D hair modeling, but also is feasible to be inferred from real images. Specifically, we collect a dataset of 1,250 portrait images with two types of annotations. A learning framework is further designed to transfer real images to the strand map and depth map. It is noted that, an extra bonus of our new dataset is the first quantitative metric for 3D hair modeling. Our experiments show that HairStep narrows the domain gap between synthetic and real and achieves state-of-the-art performance on single-view 3D hair reconstruction.


037
DiffusionRig: Learning Personalized Priors for Facial Appearance Editing

Zheng Ding · Xuaner Zhang · Zhihao Xia · Lars Jebe · Zhuowen Tu · Xiuming Zhang

We address the problem of learning person-specific facial priors from a small number (e.g., 20) of portrait photos of the same person. This enables us to edit this specific person’s facial appearance, such as expression and lighting, while preserving their identity and high-frequency facial details. Key to our approach, which we dub DiffusionRig, is a diffusion model conditioned on, or “rigged by,” crude 3D face models estimated from single in-the-wild images by an off-the-shelf estimator. On a high level, DiffusionRig learns to map simplistic renderings of 3D face models to realistic photos of a given person. Specifically, DiffusionRig is trained in two stages: It first learns generic facial priors from a large-scale face dataset and then person-specific priors from a small portrait photo collection of the person of interest. By learning the CGI-to-photo mapping with such personalized priors, DiffusionRig can “rig” the lighting, facial expression, head pose, etc. of a portrait photo, conditioned only on coarse 3D models while preserving this person’s identity and other high-frequency characteristics. Qualitative and quantitative experiments show that DiffusionRig outperforms existing approaches in both identity preservation and photorealism. Please see the project website: https://diffusionrig.github.io for the supplemental material, video, code, and data.


038
3D-Aware Facial Landmark Detection via Multi-View Consistent Training on Synthetic Data

Libing Zeng · Lele Chen · Wentao Bao · Zhong Li · Yi Xu · Junsong Yuan · Nima Khademi Kalantari

Accurate facial landmark detection on wild images plays an essential role in human-computer interaction, entertainment, and medical applications. Existing approaches have limitations in enforcing 3D consistency while detecting 3D/2D facial landmarks due to the lack of multi-view in-the-wild training data. Fortunately, with the recent advances in generative visual models and neural rendering, we have witnessed rapid progress towards high quality 3D image synthesis. In this work, we leverage such approaches to construct a synthetic dataset and propose a novel multi-view consistent learning strategy to improve 3D facial landmark detection accuracy on in-the-wild images. The proposed 3D-aware module can be plugged into any learning-based landmark detection algorithm to enhance its accuracy. We demonstrate the superiority of the proposed plug-in module with extensive comparison against state-of-the-art methods on several real and synthetic datasets.


039
Parametric Implicit Face Representation for Audio-Driven Facial Reenactment

Ricong Huang · Peiwen Lai · Yipeng Qin · Guanbin Li

Audio-driven facial reenactment is a crucial technique that has a range of applications in film-making, virtual avatars and video conferences. Existing works either employ explicit intermediate face representations (e.g., 2D facial landmarks or 3D face models) or implicit ones (e.g., Neural Radiance Fields), thus suffering from the trade-offs between interpretability and expressive power, hence between controllability and quality of the results. In this work, we break these trade-offs with our novel parametric implicit face representation and propose a novel audio-driven facial reenactment framework that is both controllable and can generate high-quality talking heads. Specifically, our parametric implicit representation parameterizes the implicit representation with interpretable parameters of 3D face models, thereby taking the best of both explicit and implicit methods. In addition, we propose several new techniques to improve the three components of our framework, including i) incorporating contextual information into the audio-to-expression parameters encoding; ii) using conditional image synthesis to parameterize the implicit representation and implementing it with an innovative tri-plane structure for efficient learning; iii) formulating facial reenactment as a conditional image inpainting problem and proposing a novel data augmentation technique to improve model generalizability. Extensive experiments demonstrate that our method can generate more realistic results than previous methods with greater fidelity to the identities and talking styles of speakers.


040
MEGANE: Morphable Eyeglass and Avatar Network

Junxuan Li · Shunsuke Saito · Tomas Simon · Stephen Lombardi · Hongdong Li · Jason Saragih

Eyeglasses play an important role in the perception of identity. Authentic virtual representations of faces can benefit greatly from their inclusion. However, modeling the geometric and appearance interactions of glasses and the face of virtual representations of humans is challenging. Glasses and faces affect each other’s geometry at their contact points, and also induce appearance changes due to light transport. Most existing approaches do not capture these physical interactions since they model eyeglasses and faces independently. Others attempt to resolve interactions as a 2D image synthesis problem and suffer from view and temporal inconsistencies. In this work, we propose a 3D compositional morphable model of eyeglasses that accurately incorporates high-fidelity geometric and photometric interaction effects. To support the large variation in eyeglass topology efficiently, we employ a hybrid representation that combines surface geometry and a volumetric representation. Unlike volumetric approaches, our model naturally retains correspondences across glasses, and hence explicit modification of geometry, such as lens insertion and frame deformation, is greatly simplified. In addition, our model is relightable under point lights and natural illumination, supporting high-fidelity rendering of various frame materials, including translucent plastic and metal within a single morphable model. Importantly, our approach models global light transport effects, such as casting shadows between faces and glasses. Our morphable model for eyeglasses can also be fit to novel glasses via inverse rendering. We compare our approach to state-of-the-art methods and demonstrate significant quality improvements.


041
CodeTalker: Speech-Driven 3D Facial Animation With Discrete Motion Prior

Jinbo Xing · Menghan Xia · Yuechen Zhang · Xiaodong Cun · Jue Wang · Tien-Tsin Wong

Speech-driven 3D facial animation has been widely studied, yet there is still a gap to achieving realism and vividness due to the highly ill-posed nature and scarcity of audio-visual data. Existing works typically formulate the cross-modal mapping into a regression task, which suffers from the regression-to-mean problem leading to over-smoothed facial motions. In this paper, we propose to cast speech-driven facial animation as a code query task in a finite proxy space of the learned codebook, which effectively promotes the vividness of the generated motions by reducing the cross-modal mapping uncertainty. The codebook is learned by self-reconstruction over real facial motions and thus embedded with realistic facial motion priors. Over the discrete motion space, a temporal autoregressive model is employed to sequentially synthesize facial motions from the input speech signal, which guarantees lip-sync as well as plausible facial expressions. We demonstrate that our approach outperforms current state-of-the-art methods both qualitatively and quantitatively. Also, a user study further justifies our superiority in perceptual quality.


042
Reconstructing Signing Avatars From Video Using Linguistic Priors

Maria-Paola Forte · Peter Kulits · Chun-Hao P. Huang · Vasileios Choutas · Dimitrios Tzionas · Katherine J. Kuchenbecker · Michael J. Black

Sign language (SL) is the primary method of communication for the 70 million Deaf people around the world. Video dictionaries of isolated signs are a core SL learning tool. Replacing these with 3D avatars can aid learning and enable AR/VR applications, improving access to technology and online media. However, little work has attempted to estimate expressive 3D avatars from SL video; occlusion, noise, and motion blur make this task difficult. We address this by introducing novel linguistic priors that are universally applicable to SL and provide constraints on 3D hand pose that help resolve ambiguities within isolated signs. Our method, SGNify, captures fine-grained hand pose, facial expression, and body movement fully automatically from in-the-wild monocular SL videos. We evaluate SGNify quantitatively by using a commercial motion-capture system to compute 3D avatars synchronized with monocular video. SGNify outperforms state-of-the-art 3D body-pose- and shape-estimation methods on SL videos. A perceptual study shows that SGNify’s 3D reconstructions are significantly more comprehensible and natural than those of previous methods and are on par with the source videos. Code and data are available at sgnify.is.tue.mpg.de.


043
HARP: Personalized Hand Reconstruction From a Monocular RGB Video

Korrawe Karunratanakul · Sergey Prokudin · Otmar Hilliges · Siyu Tang

We present HARP (HAnd Reconstruction and Personalization), a personalized hand avatar creation approach that takes a short monocular RGB video of a human hand as input and reconstructs a faithful hand avatar exhibiting a high-fidelity appearance and geometry. In contrast to the major trend of neural implicit representations, HARP models a hand with a mesh-based parametric hand model, a vertex displacement map, a normal map, and an albedo without any neural components. The explicit nature of our representation enables a truly scalable, robust, and efficient approach to hand avatar creation as validated by our experiments. HARP is optimized via gradient descent from a short sequence captured by a hand-held mobile phone and can be directly used in AR/VR applications with real-time rendering capability. To enable this, we carefully design and implement a shadow-aware differentiable rendering scheme that is robust to high degree articulations and self-shadowing regularly present in hand motions, as well as challenging lighting conditions. It also generalizes to unseen poses and novel viewpoints, producing photo-realistic renderings of hand animations. Furthermore, the learned HARP representation can be used for improving 3D hand pose estimation quality in challenging viewpoints. The key advantages of HARP are validated by the in-depth analyses on appearance reconstruction, novel view and novel pose synthesis, and 3D hand pose refinement. It is an AR/VR-ready personalized hand representation that shows superior fidelity and scalability.


044
OmniAvatar: Geometry-Guided Controllable 3D Head Synthesis

Hongyi Xu · Guoxian Song · Zihang Jiang · Jianfeng Zhang · Yichun Shi · Jing Liu · Wanchun Ma · Jiashi Feng · Linjie Luo

We present OmniAvatar, a novel geometry-guided 3D head synthesis model trained from in-the-wild unstructured images that is capable of synthesizing diverse identity-preserved 3D heads with compelling dynamic details under full disentangled control over camera poses, facial expressions, head shapes, articulated neck and jaw poses. To achieve such high level of disentangled control, we first explicitly define a novel semantic signed distance function (SDF) around a head geometry (FLAME) conditioned on the control parameters. This semantic SDF allows us to build a differentiable volumetric correspondence map from the observation space to a disentangled canonical space from all the control parameters. We then leverage the 3D-aware GAN framework (EG3D) to synthesize detailed shape and appearance of 3D full heads in the canonical space, followed by a volume rendering step guided by the volumetric correspondence map to output into the observation space. To ensure the control accuracy on the synthesized head shapes and expressions, we introduce a geometry prior loss to conform to head SDF and a control loss to conform to the expression code. Further, we enhance the temporal realism with dynamic details conditioned upon varying expressions and joint poses. Our model can synthesize more preferable identity-preserved 3D heads with compelling dynamic details compared to the state-of-the-art methods both qualitatively and quantitatively. We also provide an ablation study to justify many of our system design choices.


045
RaBit: Parametric Modeling of 3D Biped Cartoon Characters With a Topological-Consistent Dataset

Zhongjin Luo · Shengcai Cai · Jinguo Dong · Ruibo Ming · Liangdong Qiu · Xiaohang Zhan · Xiaoguang Han

Assisting people in efficiently producing visually plausible 3D characters has always been a fundamental research topic in computer vision and computer graphics. Recent learning-based approaches have achieved unprecedented accuracy and efficiency in the area of 3D real human digitization. However, none of the prior works focus on modeling 3D biped cartoon characters, which are also in great demand in gaming and filming. In this paper, we introduce 3DBiCar, the first large-scale dataset of 3D biped cartoon characters, and RaBit, the corresponding parametric model. Our dataset contains 1,500 topologically consistent high-quality 3D textured models which are manually crafted by professional artists. Built upon the data, RaBit is thus designed with a SMPL-like linear blend shape model and a StyleGAN-based neural UV-texture generator, simultaneously expressing the shape, pose, and texture. To demonstrate the practicality of 3DBiCar and RaBit, various applications are conducted, including single-view reconstruction, sketch-based modeling, and 3D cartoon animation. For the single-view reconstruction setting, we find a straightforward global mapping from input images to the output UV-based texture maps tends to lose detailed appearances of some local parts (e.g., nose, ears). Thus, a part-sensitive texture reasoner is adopted to make all important local areas perceived. Experiments further demonstrate the effectiveness of our method both qualitatively and quantitatively. 3DBiCar and RaBit are available at gaplab.cuhk.edu.cn/projects/RaBit.


046
Transfer4D: A Framework for Frugal Motion Capture and Deformation Transfer

Shubh Maheshwari · Rahul Narain · Ramya Hebbalaguppe

Animating a virtual character based on a real performance of an actor is a challenging task that currently requires expensive motion capture setups and additional effort by expert animators, rendering it accessible only to large production houses. The goal of our work is to democratize this task by developing a frugal alternative termed “Transfer4D” that uses only commodity depth sensors and further reduces animators’ effort by automating the rigging and animation transfer process. To handle sparse, incomplete videos from depth video inputs and large variations between source and target objects, we propose to use skeletons as an intermediary representation between motion capture and transfer. We propose a novel skeleton extraction pipeline from single-view depth sequence that incorporates additional geometric information, resulting in superior performance in motion reconstruction and transfer in comparison to the contemporary methods. We use non-rigid reconstruction to track motion from the depth sequence, and then we rig the source object using skinning decomposition. Finally, the rig is embedded into the target object for motion retargeting.


047
CLOTH4D: A Dataset for Clothed Human Reconstruction

Xingxing Zou · Xintong Han · Waikeung Wong

Clothed human reconstruction is the cornerstone for creating the virtual world. To a great extent, the quality of recovered avatars decides whether the Metaverse is a passing fad. In this work, we introduce CLOTH4D, a clothed human dataset containing 1,000 subjects with varied appearances, 1,000 3D outfits, and over 100,000 clothed meshes with paired unclothed humans, to fill the gap in large-scale and high-quality 4D clothing data. It enjoys appealing characteristics: 1) Accurate and detailed clothing textured meshes---all clothing items are manually created and then simulated in professional software, strictly following the general standard in fashion design. 2) Separated textured clothing and under-clothing body meshes, closer to the physical world than single-layer raw scans. 3) Clothed human motion sequences simulated given a set of 289 actions, covering fundamental and complicated dynamics. Upon CLOTH4D, we novelly designed a series of temporally-aware metrics to evaluate the temporal stability of the generated 3D human meshes, which has been overlooked previously. Moreover, by assessing and retraining current state-of-the-art clothed human reconstruction methods, we reveal insights, present improved performance, and propose potential future research directions, confirming our dataset’s advancement. The dataset is available at www.github.com/AemikaChow/AiDLab-fAshIon-Data


048
Vid2Avatar: 3D Avatar Reconstruction From Videos in the Wild via Self-Supervised Scene Decomposition

Chen Guo · Tianjian Jiang · Xu Chen · Jie Song · Otmar Hilliges

We present Vid2Avatar, a method to learn human avatars from monocular in-the-wild videos. Reconstructing humans that move naturally from monocular in-the-wild videos is difficult. Solving it requires accurately separating humans from arbitrary backgrounds. Moreover, it requires reconstructing detailed 3D surface from short video sequences, making it even more challenging. Despite these challenges, our method does not require any groundtruth supervision or priors extracted from large datasets of clothed human scans, nor do we rely on any external segmentation modules. Instead, it solves the tasks of scene decomposition and surface reconstruction directly in 3D by modeling both the human and the background in the scene jointly, parameterized via two separate neural fields. Specifically, we define a temporally consistent human representation in canonical space and formulate a global optimization over the background model, the canonical human shape and texture, and per-frame human pose parameters. A coarse-to-fine sampling strategy for volume rendering and novel objectives are introduced for a clean separation of dynamic human and static background, yielding detailed and robust 3D human reconstructions. The evaluation of our method shows improvements over prior art on publicly available datasets.


049
Highlight
High-Fidelity 3D Human Digitization From Single 2K Resolution Images

Sang-Hun Han · Min-Gyu Park · Ju Hong Yoon · Ju-Mi Kang · Young-Jae Park · Hae-Gon Jeon

High-quality 3D human body reconstruction requires high-fidelity and large-scale training data and appropriate network design that effectively exploits the high-resolution input images. To tackle these problems, we propose a simple yet effective 3D human digitization method called 2K2K, which constructs a large-scale 2K human dataset and infers 3D human models from 2K resolution images. The proposed method separately recovers the global shape of a human and its details. The low-resolution depth network predicts the global structure from a low-resolution image, and the part-wise image-to-normal network predicts the details of the 3D human body structure. The high-resolution depth network merges the global 3D shape and the detailed structures to infer the high-resolution front and back side depth maps. Finally, an off-the-shelf mesh generator reconstructs the full 3D human model, which are available at https://github.com/SangHunHan92/2K2K. In addition, we also provide 2,050 3D human models, including texture maps, 3D joints, and SMPL parameters for research purposes. In experiments, we demonstrate competitive performance over the recent works on various datasets.


050
Sampling Is Matter: Point-Guided 3D Human Mesh Reconstruction

Jeonghwan Kim · Mi-Gyeong Gwon · Hyunwoo Park · Hyukmin Kwon · Gi-Mun Um · Wonjun Kim

This paper presents a simple yet powerful method for 3D human mesh reconstruction from a single RGB image. Most recently, the non-local interactions of the whole mesh vertices have been effectively estimated in the transformer while the relationship between body parts also has begun to be handled via the graph model. Even though those approaches have shown the remarkable progress in 3D human mesh reconstruction, it is still difficult to directly infer the relationship between features, which are encoded from the 2D input image, and 3D coordinates of each vertex. To resolve this problem, we propose to design a simple feature sampling scheme. The key idea is to sample features in the embedded space by following the guide of points, which are estimated as projection results of 3D mesh vertices (i.e., ground truth). This helps the model to concentrate more on vertex-relevant features in the 2D space, thus leading to the reconstruction of the natural human pose. Furthermore, we apply progressive attention masking to precisely estimate local interactions between vertices even under severe occlusions. Experimental results on benchmark datasets show that the proposed method efficiently improves the performance of 3D human mesh reconstruction. The code and model are publicly available at: https://github.com/DCVL-3D/PointHMR_release.


051
gSDF: Geometry-Driven Signed Distance Functions for 3D Hand-Object Reconstruction

Zerui Chen · Shizhe Chen · Cordelia Schmid · Ivan Laptev

Signed distance functions (SDFs) is an attractive framework that has recently shown promising results for 3D shape reconstruction from images. SDFs seamlessly generalize to different shape resolutions and topologies but lack explicit modelling of the underlying 3D geometry. In this work, we exploit the hand structure and use it as guidance for SDF-based shape reconstruction. In particular, we address reconstruction of hands and manipulated objects from monocular RGB images. To this end, we estimate poses of hands and objects and use them to guide 3D reconstruction. More specifically, we predict kinematic chains of pose transformations and align SDFs with highly-articulated hand poses. We improve the visual features of 3D points with geometry alignment and further leverage temporal information to enhance the robustness to occlusion and motion blurs. We conduct extensive experiments on the challenging ObMan and DexYCB benchmarks and demonstrate significant improvements of the proposed method over the state of the art.


052
Human Body Shape Completion With Implicit Shape and Flow Learning

Boyao Zhou · Di Meng · Jean-Sébastien Franco · Edmond Boyer

In this paper, we investigate how to complete human body shape models by combining shape and flow estimation given two consecutive depth images. Shape completion is a challenging task in computer vision that is highly under-constrained when considering partial depth observations. Besides model based strategies that exploit strong priors, and consequently struggle to preserve fine geometric details, learning based approaches build on weaker assumptions and can benefit from efficient implicit representations. We adopt such a representation and explore how the motion flow between two consecutive frames can contribute to the shape completion task. In order to effectively exploit the flow information, our architecture combines both estimations and implements two features for robustness: First, an all-to-all attention module that encodes the correlation between points in the same frame and between corresponding points in different frames; Second, a coarse-dense to fine-sparse strategy that balances the representation ability and the computational cost. Our experiments demonstrate that the flow actually benefits human body model completion. They also show that our method outperforms the state-of-the-art approaches for shape completion on 2 benchmarks, considering different human shapes, poses, and clothing.


053
ShapeClipper: Scalable 3D Shape Learning From Single-View Images via Geometric and CLIP-Based Consistency

Zixuan Huang · Varun Jampani · Anh Thai · Yuanzhen Li · Stefan Stojanov · James M. Rehg

We present ShapeClipper, a novel method that reconstructs 3D object shapes from real-world single-view RGB images. Instead of relying on laborious 3D, multi-view or camera pose annotation, ShapeClipper learns shape reconstruction from a set of single-view segmented images. The key idea is to facilitate shape learning via CLIP-based shape consistency, where we encourage objects with similar CLIP encodings to share similar shapes. We also leverage off-the-shelf normals as an additional geometric constraint so the model can learn better bottom-up reasoning of detailed surface geometry. These two novel consistency constraints, when used to regularize our model, improve its ability to learn both global shape structure and local geometric details. We evaluate our method over three challenging real-world datasets, Pix3D, Pascal3D+, and OpenImages, where we achieve superior performance over state-of-the-art methods.


054
Highlight
PC2: Projection-Conditioned Point Cloud Diffusion for Single-Image 3D Reconstruction

Luke Melas-Kyriazi · Christian Rupprecht · Andrea Vedaldi

Reconstructing the 3D shape of an object from a single RGB image is a long-standing problem in computer vision. In this paper, we propose a novel method for single-image 3D reconstruction which generates a sparse point cloud via a conditional denoising diffusion process. Our method takes as input a single RGB image along with its camera pose and gradually denoises a set of 3D points, whose positions are initially sampled randomly from a three-dimensional Gaussian distribution, into the shape of an object. The key to our method is a geometrically-consistent conditioning process which we call projection conditioning: at each step in the diffusion process, we project local image features onto the partially-denoised point cloud from the given camera pose. This projection conditioning process enables us to generate high-resolution sparse geometries that are well-aligned with the input image and can additionally be used to predict point colors after shape reconstruction. Moreover, due to the probabilistic nature of the diffusion process, our method is naturally capable of generating multiple different shapes consistent with a single input image. In contrast to prior work, our approach not only performs well on synthetic benchmarks but also gives large qualitative improvements on complex real-world data.


055
NIKI: Neural Inverse Kinematics With Invertible Neural Networks for 3D Human Pose and Shape Estimation

Jiefeng Li · Siyuan Bian · Qi Liu · Jiasheng Tang · Fan Wang · Cewu Lu

With the progress of 3D human pose and shape estimation, state-of-the-art methods can either be robust to occlusions or obtain pixel-aligned accuracy in non-occlusion cases. However, they cannot obtain robustness and mesh-image alignment at the same time. In this work, we present NIKI (Neural Inverse Kinematics with Invertible Neural Network), which models bi-directional errors to improve the robustness to occlusions and obtain pixel-aligned accuracy. NIKI can learn from both the forward and inverse processes with invertible networks. In the inverse process, the model separates the error from the plausible 3D pose manifold for a robust 3D human pose estimation. In the forward process, we enforce the zero-error boundary conditions to improve the sensitivity to reliable joint positions for better mesh-image alignment. Furthermore, NIKI emulates the analytical inverse kinematics algorithms with the twist-and-swing decomposition for better interpretability. Experiments on standard and occlusion-specific benchmarks demonstrate the effectiveness of NIKI, where we exhibit robust and well-aligned results simultaneously. Code is available at https://github.com/Jeff-sjtu/NIKI


056
ARCTIC: A Dataset for Dexterous Bimanual Hand-Object Manipulation

Zicong Fan · Omid Taheri · Dimitrios Tzionas · Muhammed Kocabas · Manuel Kaufmann · Michael J. Black · Otmar Hilliges

Humans intuitively understand that inanimate objects do not move by themselves, but that state changes are typically caused by human manipulation (e.g., the opening of a book). This is not yet the case for machines. In part this is because there exist no datasets with ground-truth 3D annotations for the study of physically consistent and synchronised motion of hands and articulated objects. To this end, we introduce ARCTIC -- a dataset of two hands that dexterously manipulate objects, containing 2.1M video frames paired with accurate 3D hand and object meshes and detailed, dynamic contact information. It contains bi-manual articulation of objects such as scissors or laptops, where hand poses and object states evolve jointly in time. We propose two novel articulated hand-object interaction tasks: (1) Consistent motion reconstruction: Given a monocular video, the goal is to reconstruct two hands and articulated objects in 3D, so that their motions are spatio-temporally consistent. (2) Interaction field estimation: Dense relative hand-object distances must be estimated from images. We introduce two baselines ArcticNet and InterField, respectively and evaluate them qualitatively and quantitatively on ARCTIC. Our code and data are available at https://arctic.is.tue.mpg.de.


057
ACR: Attention Collaboration-Based Regressor for Arbitrary Two-Hand Reconstruction

Zhengdi Yu · Shaoli Huang · Chen Fang · Toby P. Breckon · Jue Wang

Reconstructing two hands from monocular RGB images is challenging due to frequent occlusion and mutual confusion. Existing methods mainly learn an entangled representation to encode two interacting hands, which are incredibly fragile to impaired interaction, such as truncated hands, separate hands, or external occlusion. This paper presents ACR (Attention Collaboration-based Regressor), which makes the first attempt to reconstruct hands in arbitrary scenarios. To achieve this, ACR explicitly mitigates interdependencies between hands and between parts by leveraging center and part-based attention for feature extraction. However, reducing interdependence helps release the input constraint while weakening the mutual reasoning about reconstructing the interacting hands. Thus, based on center attention, ACR also learns cross-hand prior that handle the interacting hands better. We evaluate our method on various types of hand reconstruction datasets. Our method significantly outperforms the best interacting-hand approaches on the InterHand2.6M dataset while yielding comparable performance with the state-of-the-art single-hand methods on the FreiHand dataset. More qualitative results on in-the-wild and hand-object interaction datasets and web images/videos further demonstrate the effectiveness of our approach for arbitrary hand reconstruction. Our code is available at https://github.com/ZhengdiYu/Arbitrary-Hands-3D-Reconstruction


058
MIME: Human-Aware 3D Scene Generation

Hongwei Yi · Chun-Hao P. Huang · Shashank Tripathi · Lea Hering · Justus Thies · Michael J. Black

Generating realistic 3D worlds occupied by moving humans has many applications in games, architecture, and synthetic data creation. But generating such scenes is expensive and labor intensive. Recent work generates human poses and motions given a 3D scene. Here, we take the opposite approach and generate 3D indoor scenes given 3D human motion. Such motions can come from archival motion capture or from IMU sensors worn on the body, effectively turning human movement in a “scanner” of the 3D world. Intuitively, human movement indicates the free-space in a room and human contact indicates surfaces or objects that support activities such as sitting, lying or touching. We propose MIME (Mining Interaction and Movement to infer 3D Environments), which is a generative model of indoor scenes that produces furniture layouts that are consistent with the human movement. MIME uses an auto-regressive transformer architecture that takes the already generated objects in the scene as well as the human motion as input, and outputs the next plausible object. To train MIME, we build a dataset by populating the 3D FRONT scene dataset with 3D humans. Our experiments show that MIME produces more diverse and plausible 3D scenes than a recent generative scene method that does not know about human movement. Code and data will be available for research.


059
CIMI4D: A Large Multimodal Climbing Motion Dataset Under Human-Scene Interactions

Ming Yan · Xin Wang · Yudi Dai · Siqi Shen · Chenglu Wen · Lan Xu · Yuexin Ma · Cheng Wang

Motion capture is a long-standing research problem. Although it has been studied for decades, the majority of research focus on ground-based movements such as walking, sitting, dancing, etc. Off-grounded actions such as climbing are largely overlooked. As an important type of action in sports and firefighting field, the climbing movements is challenging to capture because of its complex back poses, intricate human-scene interactions, and difficult global localization. The research community does not have an in-depth understanding of the climbing action due to the lack of specific datasets. To address this limitation, we collect CIMI4D, a large rock ClImbing MotIon on dataset from 12 persons climbing 13 different climbing walls. The dataset consists of around 180,000 frames of pose inertial measurements, LiDAR point clouds, RGB videos, high-precision static point cloud scenes, and reconstructed scene meshes. Moreover, we frame-wise annotate touch rock holds to facilitate a detailed exploration of human-scene interaction. The core of this dataset is a blending optimization process, which corrects for the pose as it drifts and is affected by the magnetic conditions. To evaluate the merit of CIMI4D, we perform four tasks which include human pose estimations (with/without scene constraints), pose prediction, and pose generation. The experimental results demonstrate that CIMI4D presents great challenges to existing methods and enables extensive research opportunities. We share the dataset with the research community in http://www.lidarhumanmotion.net/cimi4d/.


060
Harmonious Feature Learning for Interactive Hand-Object Pose Estimation

Zhifeng Lin · Changxing Ding · Huan Yao · Zengsheng Kuang · Shaoli Huang

Joint hand and object pose estimation from a single image is extremely challenging as serious occlusion often occurs when the hand and object interact. Existing approaches typically first extract coarse hand and object features from a single backbone, then further enhance them with reference to each other via interaction modules. However, these works usually ignore that the hand and object are competitive in feature learning, since the backbone takes both of them as foreground and they are usually mutually occluded. In this paper, we propose a novel Harmonious Feature Learning Network (HFL-Net). HFL-Net introduces a new framework that combines the advantages of single- and double-stream backbones: it shares the parameters of the low- and high-level convolutional layers of a common ResNet-50 model for the hand and object, leaving the middle-level layers unshared. This strategy enables the hand and the object to be extracted as the sole targets by the middle-level layers, avoiding their competition in feature learning. The shared high-level layers also force their features to be harmonious, thereby facilitating their mutual feature enhancement. In particular, we propose to enhance the feature of the hand via concatenation with the feature in the same location from the object stream. A subsequent self-attention layer is adopted to deeply fuse the concatenated feature. Experimental results show that our proposed approach consistently outperforms state-of-the-art methods on the popular HO3D and Dex-YCB databases. Notably, the performance of our model on hand pose estimation even surpasses that of existing works that only perform the single-hand pose estimation task. Code is available at https://github.com/lzfff12/HFL-Net.


061
AssemblyHands: Towards Egocentric Activity Understanding via 3D Hand Pose Estimation

Takehiko Ohkawa · Kun He · Fadime Sener · Tomas Hodan · Luan Tran · Cem Keskin

We present AssemblyHands, a large-scale benchmark dataset with accurate 3D hand pose annotations, to facilitate the study of egocentric activities with challenging hand-object interactions. The dataset includes synchronized egocentric and exocentric images sampled from the recent Assembly101 dataset, in which participants assemble and disassemble take-apart toys. To obtain high-quality 3D hand pose annotations for the egocentric images, we develop an efficient pipeline, where we use an initial set of manual annotations to train a model to automatically annotate a much larger dataset. Our annotation model uses multi-view feature fusion and an iterative refinement scheme, and achieves an average keypoint error of 4.20 mm, which is 85 % lower than the error of the original annotations in Assembly101. AssemblyHands provides 3.0M annotated images, including 490K egocentric images, making it the largest existing benchmark dataset for egocentric 3D hand pose estimation. Using this data, we develop a strong single-view baseline of 3D hand pose estimation from egocentric images. Furthermore, we design a novel action classification task to evaluate predicted 3D hand poses. Our study shows that having higher-quality hand poses directly improves the ability to recognize actions.


062
A Characteristic Function-Based Method for Bottom-Up Human Pose Estimation

Haoxuan Qu · Yujun Cai · Lin Geng Foo · Ajay Kumar · Jun Liu

Most recent methods formulate the task of human pose estimation as a heatmap estimation problem, and use the overall L2 loss computed from the entire heatmap to optimize the heatmap prediction. In this paper, we show that in bottom-up human pose estimation where each heatmap often contains multiple body joints, using the overall L2 loss to optimize the heatmap prediction may not be the optimal choice. This is because, minimizing the overall L2 loss cannot always lead the model to locate all the body joints across different sub-regions of the heatmap more accurately. To cope with this problem, from a novel perspective, we propose a new bottom-up human pose estimation method that optimizes the heatmap prediction via minimizing the distance between two characteristic functions respectively constructed from the predicted heatmap and the groundtruth heatmap. Our analysis presented in this paper indicates that the distance between these two characteristic functions is essentially the upper bound of the L2 losses w.r.t. sub-regions of the predicted heatmap. Therefore, via minimizing the distance between the two characteristic functions, we can optimize the model to provide a more accurate localization result for the body joints in different sub-regions of the predicted heatmap. We show the effectiveness of our proposed method through extensive experiments on the COCO dataset and the CrowdPose dataset.


063
Unified Pose Sequence Modeling

Lin Geng Foo · Tianjiao Li · Hossein Rahmani · Qiuhong Ke · Jun Liu

We propose a Unified Pose Sequence Modeling approach to unify heterogeneous human behavior understanding tasks based on pose data, e.g., action recognition, 3D pose estimation and 3D early action prediction. A major obstacle is that different pose-based tasks require different output data formats. Specifically, the action recognition and prediction tasks require class predictions as outputs, while 3D pose estimation requires a human pose output, which limits existing methods to leverage task-specific network architectures for each task. Hence, in this paper, we propose a novel Unified Pose Sequence (UPS) model to unify heterogeneous output formats for the aforementioned tasks by considering text-based action labels and coordinate-based human poses as language sequences. Then, by optimizing a single auto-regressive transformer, we can obtain a unified output sequence that can handle all the aforementioned tasks. Moreover, to avoid the interference brought by the heterogeneity between different tasks, a dynamic routing mechanism is also proposed to empower our UPS with the ability to learn which subsets of parameters should be shared among different tasks. To evaluate the efficacy of the proposed UPS, extensive experiments are conducted on four different tasks with four popular behavior understanding benchmarks.


064
Scene-Aware Egocentric 3D Human Pose Estimation

Jian Wang · Diogo Luvizon · Weipeng Xu · Lingjie Liu · Kripasindhu Sarkar · Christian Theobalt

Egocentric 3D human pose estimation with a single head-mounted fisheye camera has recently attracted attention due to its numerous applications in virtual and augmented reality. Existing methods still struggle in challenging poses where the human body is highly occluded or is closely interacting with the scene. To address this issue, we propose a scene-aware egocentric pose estimation method that guides the prediction of the egocentric pose with scene constraints. To this end, we propose an egocentric depth estimation network to predict the scene depth map from a wide-view egocentric fisheye camera while mitigating the occlusion of the human body with a depth-inpainting network. Next, we propose a scene-aware pose estimation network that projects the 2D image features and estimated depth map of the scene into a voxel space and regresses the 3D pose with a V2V network. The voxel-based feature representation provides the direct geometric connection between 2D image features and scene geometry, and further facilitates the V2V network to constrain the predicted pose based on the estimated scene geometry. To enable the training of the aforementioned networks, we also generated a synthetic dataset, called EgoGTA, and an in-the-wild dataset based on EgoPW, called EgoPW-Scene. The experimental results of our new evaluation sequences show that the predicted 3D egocentric poses are accurate and physically plausible in terms of human-scene interaction, demonstrating that our method outperforms the state-of-the-art methods both quantitatively and qualitatively.


065
DiffPose: Toward More Reliable 3D Pose Estimation

Jia Gong · Lin Geng Foo · Zhipeng Fan · Qiuhong Ke · Hossein Rahmani · Jun Liu

Monocular 3D human pose estimation is quite challenging due to the inherent ambiguity and occlusion, which often lead to high uncertainty and indeterminacy. On the other hand, diffusion models have recently emerged as an effective tool for generating high-quality images from noise. Inspired by their capability, we explore a novel pose estimation framework (DiffPose) that formulates 3D pose estimation as a reverse diffusion process. We incorporate novel designs into our DiffPose to facilitate the diffusion process for 3D pose estimation: a pose-specific initialization of pose uncertainty distributions, a Gaussian Mixture Model-based forward diffusion process, and a context-conditioned reverse diffusion process. Our proposed DiffPose significantly outperforms existing methods on the widely used pose estimation benchmarks Human3.6M and MPI-INF-3DHP. Project page: https://gongjia0208.github.io/Diffpose/.


066
MammalNet: A Large-Scale Video Benchmark for Mammal Recognition and Behavior Understanding

Jun Chen · Ming Hu · Darren J. Coker · Michael L. Berumen · Blair Costelloe · Sara Beery · Anna Rohrbach · Mohamed Elhoseiny

Monitoring animal behavior can facilitate conservation efforts by providing key insights into wildlife health, population status, and ecosystem function. Automatic recognition of animals and their behaviors is critical for capitalizing on the large unlabeled datasets generated by modern video devices and for accelerating monitoring efforts at scale. However, the development of automated recognition systems is currently hindered by a lack of appropriately labeled datasets. Existing video datasets 1) do not classify animals according to established biological taxonomies; 2) are too small to facilitate large-scale behavioral studies and are often limited to a single species; and 3) do not feature temporally localized annotations and therefore do not facilitate localization of targeted behaviors within longer video sequences. Thus, we propose MammalNet, a new large-scale animal behavior dataset with taxonomy-guided annotations of mammals and their common behaviors. MammalNet contains over 18K videos totaling 539 hours, which is ~10 times larger than the largest existing animal behavior dataset. It covers 17 orders, 69 families, and 173 mammal categories for animal categorization and captures 12 high-level animal behaviors that received focus in previous animal behavior studies. We establish three benchmarks on MammalNet: standard animal and behavior recognition, compositional low-shot animal and behavior recognition, and behavior detection. Our dataset and code have been made available at: https://mammal-net.github.io.


067
Learning 3D-Aware Image Synthesis With Unknown Pose Distribution

Zifan Shi · Yujun Shen · Yinghao Xu · Sida Peng · Yiyi Liao · Sheng Guo · Qifeng Chen · Dit-Yan Yeung

Existing methods for 3D-aware image synthesis largely depend on the 3D pose distribution pre-estimated on the training set. An inaccurate estimation may mislead the model into learning faulty geometry. This work proposes PoF3D that frees generative radiance fields from the requirements of 3D pose priors. We first equip the generator with an efficient pose learner, which is able to infer a pose from a latent code, to approximate the underlying true pose distribution automatically. We then assign the discriminator a task to learn pose distribution under the supervision of the generator and to differentiate real and synthesized images with the predicted pose as the condition. The pose-free generator and the pose-aware discriminator are jointly trained in an adversarial manner. Extensive results on a couple of datasets confirm that the performance of our approach, regarding both image quality and geometry quality, is on par with state of the art. To our best knowledge, PoF3D demonstrates the feasibility of learning high-quality 3D-aware image synthesis without using 3D pose priors for the first time. Project page can be found at https://vivianszf.github.io/pof3d/.


068
Pose Synchronization Under Multiple Pair-Wise Relative Poses

Yifan Sun · Qixing Huang

Pose synchronization, which seeks to estimate consistent absolute poses among a collection of objects from noisy relative poses estimated between pairs of objects in isolation, is a fundamental problem in many inverse applications. This paper studies an extreme setting where multiple relative pose estimates exist between each object pair, and the majority is incorrect. Popular methods that solve pose synchronization via recovering a low-rank matrix that encodes relative poses in block fail under this extreme setting. We introduce a three-step algorithm for pose synchronization under multiple relative pose inputs. The first step performs diffusion and clustering to compute the candidate poses of the input objects. We present a theoretical result to justify our diffusion formulation. The second step jointly optimizes the best pose for each object. The final step refines the output of the second step. Experimental results on benchmark datasets of structurefrom-motion and scan-based geometry reconstruction show that our approach offers more accurate absolute poses than state-of-the-art pose synchronization techniques.


069
ObjectMatch: Robust Registration Using Canonical Object Correspondences

Can Gümeli · Angela Dai · Matthias Nießner

We present ObjectMatch, a semantic and object-centric camera pose estimator for RGB-D SLAM pipelines. Modern camera pose estimators rely on direct correspondences of overlapping regions between frames; however, they cannot align camera frames with little or no overlap. In this work, we propose to leverage indirect correspondences obtained via semantic object identification. For instance, when an object is seen from the front in one frame and from the back in another frame, we can provide additional pose constraints through canonical object correspondences. We first propose a neural network to predict such correspondences on a per-pixel level, which we then combine in our energy formulation with state-of-the-art keypoint matching solved with a joint Gauss-Newton optimization. In a pairwise setting, our method improves registration recall of state-of-the-art feature matching, including from 24% to 45% in pairs with 10% or less inter-frame overlap. In registering RGB-D sequences, our method outperforms cutting-edge SLAM baselines in challenging, low-frame-rate scenarios, achieving more than 35% reduction in trajectory error in multiple scenes.


070
Learning Articulated Shape With Keypoint Pseudo-Labels From Web Images

Anastasis Stathopoulos · Georgios Pavlakos · Ligong Han · Dimitris N. Metaxas

This paper shows that it is possible to learn models for monocular 3D reconstruction of articulated objects (e.g. horses, cows, sheep), using as few as 50-150 images labeled with 2D keypoints. Our proposed approach involves training category-specific keypoint estimators, generating 2D keypoint pseudo-labels on unlabeled web images, and using both the labeled and self-labeled sets to train 3D reconstruction models. It is based on two key insights: (1) 2D keypoint estimation networks trained on as few as 50-150 images of a given object category generalize well and generate reliable pseudo-labels; (2) a data selection mechanism can automatically create a “curated” subset of the unlabeled web images that can be used for training -- we evaluate four data selection methods. Coupling these two insights enables us to train models that effectively utilize web images, resulting in improved 3D reconstruction performance for several articulated object categories beyond the fully-supervised baseline. Our approach can quickly bootstrap a model and requires only a few images labeled with 2D keypoints. This requirement can be easily satisfied for any new object category. To showcase the practicality of our approach for predicting the 3D shape of arbitrary object categories, we annotate 2D keypoints on 250 giraffe and bear images from COCO in just 2.5 hours per category.


071
Learning Correspondence Uncertainty via Differentiable Nonlinear Least Squares

Dominik Muhle · Lukas Koestler · Krishna Murthy Jatavallabhula · Daniel Cremers

We propose a differentiable nonlinear least squares framework to account for uncertainty in relative pose estimation from feature correspondences. Specifically, we introduce a symmetric version of the probabilistic normal epipolar constraint, and an approach to estimate the covariance of feature positions by differentiating through the camera pose estimation procedure. We evaluate our approach on synthetic, as well as the KITTI and EuRoC real-world datasets. On the synthetic dataset, we confirm that our learned covariances accurately approximate the true noise distribution. In real world experiments, we find that our approach consistently outperforms state-of-the-art non-probabilistic and probabilistic approaches, regardless of the feature extraction algorithm of choice.


072
Highlight
Efficient Second-Order Plane Adjustment

Lipu Zhou

Planes are generally used in 3D reconstruction for depth sensors, such as RGB-D cameras and LiDARs. This paper focuses on the problem of estimating the optimal planes and sensor poses to minimize the point-to-plane distance. The resulting least-squares problem is referred to as plane adjustment (PA) in the literature, which is the counterpart of bundle adjustment (BA) in visual reconstruction. Iterative methods are adopted to solve these least-squares problems. Typically, Newton’s method is rarely used for a large-scale least-squares problem, due to the high computational complexity of the Hessian matrix. Instead, methods using an approximation of the Hessian matrix, such as the Levenberg-Marquardt (LM) method, are generally adopted. This paper adopts the Newton’s method to efficiently solve the PA problem. Specifically, given poses, the optimal plane have a close-form solution. Thus we can eliminate planes from the cost function, which significantly reduces the number of variables. Furthermore, as the optimal planes are functions of poses, this method actually ensures that the optimal planes for the current estimated poses can be obtained at each iteration, which benefits the convergence. The difficulty lies in how to efficiently compute the Hessian matrix and the gradient of the resulting cost. This paper provides an efficient solution. Empirical evaluation shows that our algorithm outperforms the state-of-the-art algorithms.


073
Learning a Depth Covariance Function

Eric Dexheimer · Andrew J. Davison

We propose learning a depth covariance function with applications to geometric vision tasks. Given RGB images as input, the covariance function can be flexibly used to define priors over depth functions, predictive distributions given observations, and methods for active point selection. We leverage these techniques for a selection of downstream tasks: depth completion, bundle adjustment, and monocular dense visual odometry.


074
Privacy-Preserving Representations Are Not Enough: Recovering Scene Content From Camera Poses

Kunal Chelani · Torsten Sattler · Fredrik Kahl · Zuzana Kukelova

Visual localization is the task of estimating the camera pose from which a given image was taken and is central to several 3D computer vision applications. With the rapid growth in the popularity of AR/VR/MR devices and cloud-based applications, privacy issues are becoming a very important aspect of the localization process. Existing work on privacy-preserving localization aims to defend against an attacker who has access to a cloud-based service. In this paper, we show that an attacker can learn about details of a scene without any access by simply querying a localization service. The attack is based on the observation that modern visual localization algorithms are robust to variations in appearance and geometry. While this is in general a desired property, it also leads to algorithms localizing objects that are similar enough to those present in a scene. An attacker can thus query a server with a large enough set of images of objects, e.g., obtained from the Internet, and some of them will be localized. The attacker can thus learn about object placements from the camera poses returned by the service (which is the minimal information returned by such a service). In this paper, we develop a proof-of-concept version of this attack and demonstrate its practical feasibility. The attack does not place any requirements on the localization algorithm used, and thus also applies to privacy-preserving representations. Current work on privacy-preserving representations alone is thus insufficient.


075
Objaverse: A Universe of Annotated 3D Objects

Matt Deitke · Dustin Schwenk · Jordi Salvador · Luca Weihs · Oscar Michel · Eli VanderBilt · Ludwig Schmidt · Kiana Ehsani · Aniruddha Kembhavi · Ali Farhadi

Massive data corpora like WebText, Wikipedia, Conceptual Captions, WebImageText, and LAION have propelled recent dramatic progress in AI. Large neural models trained on such datasets produce impressive results and top many of today’s benchmarks. A notable omission within this family of large-scale datasets is 3D data. Despite considerable interest and potential applications in 3D vision, datasets of high-fidelity 3D models continue to be mid-sized with limited diversity of object categories. Addressing this gap, we present Objaverse 1.0, a large dataset of objects with 800K+ (and growing) 3D models with descriptive captions, tags, and animations. Objaverse improves upon present day 3D repositories in terms of scale, number of categories, and in the visual diversity of instances within a category. We demonstrate the large potential of Objaverse via four diverse applications: training generative 3D models, improving tail category segmentation on the LVIS benchmark, training open-vocabulary object-navigation models for Embodied AI, and creating a new benchmark for robustness analysis of vision models. Objaverse can open new directions for research and enable new applications across the field of AI.


076
Omni3D: A Large Benchmark and Model for 3D Object Detection in the Wild

Garrick Brazil · Abhinav Kumar · Julian Straub · Nikhila Ravi · Justin Johnson · Georgia Gkioxari

Recognizing scenes and objects in 3D from a single image is a longstanding goal of computer vision with applications in robotics and AR/VR. For 2D recognition, large datasets and scalable solutions have led to unprecedented advances. In 3D, existing benchmarks are small in size and approaches specialize in few object categories and specific domains, e.g. urban driving scenes. Motivated by the success of 2D recognition, we revisit the task of 3D object detection by introducing a large benchmark, called Omni3D. Omni3D re-purposes and combines existing datasets resulting in 234k images annotated with more than 3 million instances and 98 categories. 3D detection at such scale is challenging due to variations in camera intrinsics and the rich diversity of scene and object types. We propose a model, called Cube R-CNN, designed to generalize across camera and scene types with a unified approach. We show that Cube R-CNN outperforms prior works on the larger Omni3D and existing benchmarks. Finally, we prove that Omni3D is a powerful dataset for 3D object recognition and show that it improves single-dataset performance and can accelerate learning on new smaller datasets via pre-training.


077
HelixSurf: A Robust and Efficient Neural Implicit Surface Learning of Indoor Scenes With Iterative Intertwined Regularization

Zhihao Liang · Zhangjin Huang · Changxing Ding · Kui Jia

Recovery of an underlying scene geometry from multi-view images stands as a long-time challenge in computer vision research. The recent promise leverages neural implicit surface learning and differentiable volume rendering, and achieves both the recovery of scene geometry and synthesis of novel views, where deep priors of neural models are used as an inductive smoothness bias. While promising for object-level surfaces, these methods suffer when coping with complex scene surfaces. In the meanwhile, traditional multi-view stereo can recover the geometry of scenes with rich textures, by globally optimizing the local, pixel-wise correspondences across multiple views. We are thus motivated to make use of the complementary benefits from the two strategies, and propose a method termed Helix-shaped neural implicit Surface learning or HelixSurf; HelixSurf uses the intermediate prediction from one strategy as the guidance to regularize the learning of the other one, and conducts such intertwined regularization iteratively during the learning process. We also propose an efficient scheme for differentiable volume rendering in HelixSurf. Experiments on surface reconstruction of indoor scenes show that our method compares favorably with existing methods and is orders of magnitude faster, even when some of existing methods are assisted with auxiliary training data. The source code is available at https://github.com/Gorilla-Lab-SCUT/HelixSurf.


078
Visual Localization Using Imperfect 3D Models From the Internet

Vojtech Panek · Zuzana Kukelova · Torsten Sattler

Visual localization is a core component in many applications, including augmented reality (AR). Localization algorithms compute the camera pose of a query image w.r.t. a scene representation, which is typically built from images. This often requires capturing and storing large amounts of data, followed by running Structure-from-Motion (SfM) algorithms. An interesting, and underexplored, source of data for building scene representations are 3D models that are readily available on the Internet, e.g., hand-drawn CAD models, 3D models generated from building footprints, or from aerial images. These models allow to perform visual localization right away without the time-consuming scene capturing and model building steps. Yet, it also comes with challenges as the available 3D models are often imperfect reflections of reality. E.g., the models might only have generic or no textures at all, might only provide a simple approximation of the scene geometry, or might be stretched. This paper studies how the imperfections of these models affect localization accuracy. We create a new benchmark for this task and provide a detailed experimental evaluation based on multiple 3D models per scene. We show that 3D models from the Internet show promise as an easy-to-obtain scene representation. At the same time, there is significant room for improvement for visual localization pipelines. To foster research on this interesting and challenging task, we release our benchmark at v-pnk.github.io/cadloc.


079
Highlight
PRISE: Demystifying Deep Lucas-Kanade With Strongly Star-Convex Constraints for Multimodel Image Alignment

Yiqing Zhang · Xinming Huang · Ziming Zhang

The Lucas-Kanade (LK) method is a classic iterative homography estimation algorithm for image alignment, but often suffers from poor local optimality especially when image pairs have large distortions. To address this challenge, in this paper we propose a novel Deep Star-Convexified Lucas-Kanade (PRISE)} method for multimodel image alignment by introducing strongly star-convex constraints into the optimization problem. Our basic idea is to enforce the neural network to approximately learn a star-convex loss landscape around the ground truth give any data to facilitate the convergence of the LK method to the ground truth through the high dimensional space defined by the network. This leads to a minimax learning problem, with contrastive (hinge) losses due to the definition of strong star-convexity that are appended to the original loss for training. We also provide an efficient sampling based algorithm to leverage the training cost, as well as some analysis on the quality of the solutions from PRISE. We further evaluate our approach on benchmark datasets such as MSCOCO, GoogleEarth, and GoogleMap, and demonstrate state-of-the-art results, especially for small pixel errors. Demo code is attached.


080
Highlight
Scalable, Detailed and Mask-Free Universal Photometric Stereo

Satoshi Ikehata

In this paper, we introduce SDM-UniPS, a groundbreaking Scalable, Detailed, Mask-free, and Universal Photometric Stereo network. Our approach can recover astonishingly intricate surface normal maps, rivaling the quality of 3D scanners, even when images are captured under unknown, spatially-varying lighting conditions in uncontrolled environments. We have extended previous universal photometric stereo networks to extract spatial-light features, utilizing all available information in high-resolution input images and accounting for non-local interactions among surface points. Moreover, we present a new synthetic training dataset that encompasses a diverse range of shapes, materials, and illumination scenarios found in real-world scenes. Through extensive evaluation, we demonstrate that our method not only surpasses calibrated, lighting-specific techniques on public benchmarks, but also excels with a significantly smaller number of input images even without object masks.


081
Enhanced Stable View Synthesis

Nishant Jain · Suryansh Kumar · Luc Van Gool

We introduce an approach to enhance the novel view synthesis from images taken from a freely moving camera. The introduced approach focuses on outdoor scenes where recovering accurate geometric scaffold and camera pose is challenging, leading to inferior results using the state-of-the-art stable view synthesis (SVS) method. SVS and related methods fail for outdoor scenes primarily due to (i) over-relying on the multiview stereo (MVS) for geometric scaffold recovery and (ii) assuming COLMAP computed camera poses as the best possible estimates, despite it being well-studied that MVS 3D reconstruction accuracy is limited to scene disparity and camera-pose accuracy is sensitive to key-point correspondence selection. This work proposes a principled way to enhance novel view synthesis solutions drawing inspiration from the basics of multiple view geometry. By leveraging the complementary behavior of MVS and monocular depth, we arrive at a better scene depth per view for nearby and far points, respectively. Moreover, our approach jointly refines camera poses with image-based rendering via multiple rotation averaging graph optimization. The recovered scene depth and the camera-pose help better view-dependent on-surface feature aggregation of the entire scene. Extensive evaluation of our approach on the popular benchmark dataset, such as Tanks and Temples, shows substantial improvement in view synthesis results compared to the prior art. For instance, our method shows 1.5 dB of PSNR improvement on the Tank and Temples. Similar statistics are observed when tested on other benchmark datasets such as FVS, Mip-NeRF 360, and DTU.


082
End-to-End Vectorized HD-Map Construction With Piecewise Bezier Curve

Limeng Qiao · Wenjie Ding · Xi Qiu · Chi Zhang

Vectorized high-definition map (HD-map) construction, which focuses on the perception of centimeter-level environmental information, has attracted significant research interest in the autonomous driving community. Most existing approaches first obtain rasterized map with the segmentation-based pipeline and then conduct heavy post-processing for downstream-friendly vectorization. In this paper, by delving into parameterization-based methods, we pioneer a concise and elegant scheme that adopts unified piecewise Bezier curve. In order to vectorize changeful map elements end-to-end, we elaborate a simple yet effective architecture, named Piecewise Bezier HD-map Network (BeMapNet), which is formulated as a direct set prediction paradigm and postprocessing-free. Concretely, we first introduce a novel IPM-PE Align module to inject 3D geometry prior into BEV features through common position encoding in Transformer. Then a well-designed Piecewise Bezier Head is proposed to output the details of each map element, including the coordinate of control points and the segment number of curves. In addition, based on the progressively restoration of Bezier curve, we also present an efficient Point-Curve-Region Loss for supervising more robust and precise HD-map modeling. Extensive comparisons show that our method is remarkably superior to other existing SOTAs by 18.0 mAP at least.


083
DynamicStereo: Consistent Dynamic Depth From Stereo Videos

Nikita Karaev · Ignacio Rocco · Benjamin Graham · Natalia Neverova · Andrea Vedaldi · Christian Rupprecht

We consider the problem of reconstructing a dynamic scene observed from a stereo camera. Most existing methods for depth from stereo treat different stereo frames independently, leading to temporally inconsistent depth predictions. Temporal consistency is especially important for immersive AR or VR scenarios, where flickering greatly diminishes the user experience. We propose DynamicStereo, a novel transformer-based architecture to estimate disparity for stereo videos. The network learns to pool information from neighboring frames to improve the temporal consistency of its predictions. Our architecture is designed to process stereo videos efficiently through divided attention layers. We also introduce Dynamic Replica, a new benchmark dataset containing synthetic videos of people and animals in scanned environments, which provides complementary training and evaluation data for dynamic stereo closer to real applications than existing datasets. Training with this dataset further improves the quality of predictions of our proposed DynamicStereo as well as prior methods. Finally, it acts as a benchmark for consistent stereo methods.


084
Shakes on a Plane: Unsupervised Depth Estimation From Unstabilized Photography

Ilya Chugunov · Yuxuan Zhang · Felix Heide

Modern mobile burst photography pipelines capture and merge a short sequence of frames to recover an enhanced image, but often disregard the 3D nature of the scene they capture, treating pixel motion between images as a 2D aggregation problem. We show that in a “long-burst”, forty-two 12-megapixel RAW frames captured in a two-second sequence, there is enough parallax information from natural hand tremor alone to recover high-quality scene depth. To this end, we devise a test-time optimization approach that fits a neural RGB-D representation to long-burst data and simultaneously estimates scene depth and camera motion. Our plane plus depth model is trained end-to-end, and performs coarse-to-fine refinement by controlling which multi-resolution volume features the network has access to at what time during training. We validate the method experimentally, and demonstrate geometrically accurate depth reconstructions with no additional hardware or separate data pre-processing and pose-estimation steps.


085
Highlight
Gated Stereo: Joint Depth Estimation From Gated and Wide-Baseline Active Stereo Cues

Stefanie Walz · Mario Bijelic · Andrea Ramazzina · Amanpreet Walia · Fahim Mannan · Felix Heide

We propose Gated Stereo, a high-resolution and long-range depth estimation technique that operates on active gated stereo images. Using active and high dynamic range passive captures, Gated Stereo exploits multi-view cues alongside time-of-flight intensity cues from active gating. To this end, we propose a depth estimation method with a monocular and stereo depth prediction branch which are combined in a final fusion stage. Each block is supervised through a combination of supervised and gated self-supervision losses. To facilitate training and validation, we acquire a long-range synchronized gated stereo dataset for automotive scenarios. We find that the method achieves an improvement of more than 50 % MAE compared to the next best RGB stereo method, and 74 % MAE to existing monocular gated methods for distances up to 160 m. Our code, models and datasets are available here: https://light.princeton.edu/gatedstereo/.


086
K3DN: Disparity-Aware Kernel Estimation for Dual-Pixel Defocus Deblurring

Yan Yang · Liyuan Pan · Liu Liu · Miaomiao Liu

The dual-pixel (DP) sensor captures a two-view image pair in a single snapshot by splitting each pixel in half. The disparity occurs in defocus blurred regions between the two views of the DP pair, while the in-focus sharp regions have zero disparity. This motivates us to propose a K3DN framework for DP pair deblurring, and it has three modules: i) a disparity-aware deblur module. It estimates a disparity feature map, which is used to query a trainable kernel set to estimate a blur kernel that best describes the spatially-varying blur. The kernel is constrained to be symmetrical per the DP formulation. A simple Fourier transform is performed for deblurring that follows the blur model; ii) a reblurring regularization module. It reuses the blur kernel, performs a simple convolution for reblurring, and regularizes the estimated kernel and disparity feature unsupervisedly, in the training stage; iii) a sharp region preservation module. It identifies in-focus regions that correspond to areas with zero disparity between DP images, aims to avoid the introduction of noises during the deblurring process, and improves image restoration performance. Experiments on four standard DP datasets show that the proposed K3DN outperforms state-of-the-art methods, with fewer parameters and flops at the same time.


087
HRDFuse: Monocular 360° Depth Estimation by Collaboratively Learning Holistic-With-Regional Depth Distributions

Hao Ai · Zidong Cao · Yan-Pei Cao · Ying Shan · Lin Wang

Depth estimation from a monocular 360 image is a burgeoning problem owing to its holistic sensing of a scene. Recently, some methods, e.g., OmniFusion, have applied the tangent projection (TP) to represent a 360 image and predicted depth values via patch-wise regressions, which are merged to get a depth map with equirectangular projection (ERP) format. However, these methods suffer from 1) non-trivial process of merging a large number of patches; 2) capturing less holistic-with-regional contextual information by directly regressing the depth value of each pixel. In this paper, we propose a novel framework, HRDFuse, that subtly combines the potential of convolutional neural networks (CNNs) and transformers by collaboratively learning the holistic contextual information from the ERP and the regional structural information from the TP. Firstly, we propose a spatial feature alignment (SFA) module that learns feature similarities between the TP and ERP to aggregate the TP features into a complete ERP feature map in a pixel-wise manner. Secondly, we propose a collaborative depth distribution classification (CDDC) module that learns the holistic-with-regional histograms capturing the ERP and TP depth distributions. As such, the final depth values can be predicted as a linear combination of histogram bin centers. Lastly, we adaptively combine the depth predictions from ERP and TP to obtain the final depth map. Extensive experiments show that our method predicts more smooth and accurate depth results while achieving favorably better results than the SOTA methods.


088
OSRT: Omnidirectional Image Super-Resolution With Distortion-Aware Transformer

Fanghua Yu · Xintao Wang · Mingdeng Cao · Gen Li · Ying Shan · Chao Dong

Omnidirectional images (ODIs) have obtained lots of research interest for immersive experiences. Although ODIs require extremely high resolution to capture details of the entire scene, the resolutions of most ODIs are insufficient. Previous methods attempt to solve this issue by image super-resolution (SR) on equirectangular projection (ERP) images. However, they omit geometric properties of ERP in the degradation process, and their models can hardly generalize to real ERP images. In this paper, we propose Fisheye downsampling, which mimics the real-world imaging process and synthesizes more realistic low-resolution samples. Then we design a distortion-aware Transformer (OSRT) to modulate ERP distortions continuously and self-adaptively. Without a cumbersome process, OSRT outperforms previous methods by about 0.2dB on PSNR. Moreover, we propose a convenient data augmentation strategy, which synthesizes pseudo ERP images from plain images. This simple strategy can alleviate the over-fitting problem of large networks and significantly boost the performance of ODI SR. Extensive experiments have demonstrated the state-of-the-art performance of our OSRT.


089
Co-SLAM: Joint Coordinate and Sparse Parametric Encodings for Neural Real-Time SLAM

Hengyi Wang · Jingwen Wang · Lourdes Agapito

We present Co-SLAM, a neural RGB-D SLAM system based on a hybrid representation, that performs robust camera tracking and high-fidelity surface reconstruction in real time. Co-SLAM represents the scene as a multi-resolution hash-grid to exploit its high convergence speed and ability to represent high-frequency local features. In addition, Co-SLAM incorporates one-blob encoding, to encourage surface coherence and completion in unobserved areas. This joint parametric-coordinate encoding enables real-time and robust performance by bringing the best of both worlds: fast convergence and surface hole filling. Moreover, our ray sampling strategy allows Co-SLAM to perform global bundle adjustment over all keyframes instead of requiring keyframe selection to maintain a small number of active keyframes as competing neural SLAM approaches do. Experimental results show that Co-SLAM runs at 10-17Hz and achieves state-of-the-art scene reconstruction results, and competitive tracking performance in various datasets and benchmarks (ScanNet, TUM, Replica, Synthetic RGBD). Project page: https://hengyiwang.github.io/projects/CoSLAM


090
Few-Shot Non-Line-of-Sight Imaging With Signal-Surface Collaborative Regularization

Xintong Liu · Jianyu Wang · Leping Xiao · Xing Fu · Lingyun Qiu · Zuoqiang Shi

The non-line-of-sight imaging technique aims to reconstruct targets from multiply reflected light. For most existing methods, dense points on the relay surface are raster scanned to obtain high-quality reconstructions, which requires a long acquisition time. In this work, we propose a signal-surface collaborative regularization (SSCR) framework that provides noise-robust reconstructions with a minimal number of measurements. Using Bayesian inference, we design joint regularizations of the estimated signal, the 3D voxel-based representation of the objects, and the 2D surface-based description of the targets. To our best knowledge, this is the first work that combines regularizations in mixed dimensions for hidden targets. Experiments on synthetic and experimental datasets illustrated the efficiency of the proposed method under both confocal and non-confocal settings. We report the reconstruction of the hidden targets with complex geometric structures with only 5 × 5 confocal measurements from public datasets, indicating an acceleration of the conventional measurement process by a factor of 10,000. Besides, the proposed method enjoys low time and memory complexity with sparse measurements. Our approach has great potential in real-time non-line-of-sight imaging applications such as rescue operations and autonomous driving.


091
NLOST: Non-Line-of-Sight Imaging With Transformer

Yue Li · Jiayong Peng · Juntian Ye · Yueyi Zhang · Feihu Xu · Zhiwei Xiong

Time-resolved non-line-of-sight (NLOS) imaging is based on the multi-bounce indirect reflections from the hidden objects for 3D sensing. Reconstruction from NLOS measurements remains challenging especially for complicated scenes. To boost the performance, we present NLOST, the first transformer-based neural network for NLOS reconstruction. Specifically, after extracting the shallow features with the assistance of physics-based priors, we design two spatial-temporal self attention encoders to explore both local and global correlations within 3D NLOS data by splitting or downsampling the features into different scales, respectively. Then, we design a spatial-temporal cross attention decoder to integrate local and global features in the token space of transformer, resulting in deep features with high representation capabilities. Finally, deep and shallow features are fused to reconstruct the 3D volume of hidden scenes. Extensive experimental results demonstrate the superior performance of the proposed method over existing solutions on both synthetic data and real-world data captured by different NLOS imaging systems.


092
Listening Human Behavior: 3D Human Pose Estimation With Acoustic Signals

Yuto Shibata · Yutaka Kawashima · Mariko Isogawa · Go Irie · Akisato Kimura · Yoshimitsu Aoki

Given only acoustic signals without any high-level information, such as voices or sounds of scenes/actions, how much can we infer about the behavior of humans? Unlike existing methods, which suffer from privacy issues because they use signals that include human speech or the sounds of specific actions, we explore how low-level acoustic signals can provide enough clues to estimate 3D human poses by active acoustic sensing with a single pair of microphones and loudspeakers (see Fig. 1). This is a challenging task since sound is much more diffractive than other signals and therefore covers up the shape of objects in a scene. Accordingly, we introduce a framework that encodes multichannel audio features into 3D human poses. Aiming to capture subtle sound changes to reveal detailed pose information, we explicitly extract phase features from the acoustic signals together with typical spectrum features and feed them into our human pose estimation network. Also, we show that reflected or diffracted sounds are easily influenced by subjects’ physique differences e.g., height and muscularity, which deteriorates prediction accuracy. We reduce these gaps by using a subject discriminator to improve accuracy. Our experiments suggest that with the use of only low-dimensional acoustic information, our method outperforms baseline methods. The datasets and codes used in this project will be publicly available.


093
Towards Domain Generalization for Multi-View 3D Object Detection in Bird-Eye-View

Shuo Wang · Xinhai Zhao · Hai-Ming Xu · Zehui Chen · Dameng Yu · Jiahao Chang · Zhen Yang · Feng Zhao

Multi-view 3D object detection (MV3D-Det) in Bird-Eye-View (BEV) has drawn extensive attention due to its low cost and high efficiency. Although new algorithms for camera-only 3D object detection have been continuously proposed, most of them may risk drastic performance degradation when the domain of input images differs from that of training. In this paper, we first analyze the causes of the domain gap for the MV3D-Det task. Based on the covariate shift assumption, we find that the gap mainly attributes to the feature distribution of BEV, which is determined by the quality of both depth estimation and 2D image’s feature representation. To acquire a robust depth prediction, we propose to decouple the depth estimation from the intrinsic parameters of the camera (i.e. the focal length) through converting the prediction of metric depth to that of scale-invariant depth and perform dynamic perspective augmentation to increase the diversity of the extrinsic parameters (i.e. the camera poses) by utilizing homography. Moreover, we modify the focal length values to create multiple pseudo-domains and construct an adversarial training loss to encourage the feature representation to be more domain-agnostic. Without bells and whistles, our approach, namely DG-BEV, successfully alleviates the performance drop on the unseen target domain without impairing the accuracy of the source domain. Extensive experiments on Waymo, nuScenes, and Lyft, demonstrate the generalization and effectiveness of our approach.


094
X3KD: Knowledge Distillation Across Modalities, Tasks and Stages for Multi-Camera 3D Object Detection

Marvin Klingner · Shubhankar Borse · Varun Ravi Kumar · Behnaz Rezaei · Venkatraman Narayanan · Senthil Yogamani · Fatih Porikli

Recent advances in 3D object detection (3DOD) have obtained remarkably strong results for LiDAR-based models. In contrast, surround-view 3DOD models based on multiple camera images underperform due to the necessary view transformation of features from perspective view (PV) to a 3D world representation which is ambiguous due to missing depth information. This paper introduces X3KD, a comprehensive knowledge distillation framework across different modalities, tasks, and stages for multi-camera 3DOD. Specifically, we propose cross-task distillation from an instance segmentation teacher (X-IS) in the PV feature extraction stage providing supervision without ambiguous error backpropagation through the view transformation. After the transformation, we apply cross-modal feature distillation (X-FD) and adversarial training (X-AT) to improve the 3D world representation of multi-camera features through the information contained in a LiDAR-based 3DOD teacher. Finally, we also employ this teacher for cross-modal output distillation (X-OD), providing dense supervision at the prediction stage. We perform extensive ablations of knowledge distillation at different stages of multi-camera 3DOD. Our final X3KD model outperforms previous state-of-the-art approaches on the nuScenes and Waymo datasets and generalizes to RADAR-based 3DOD. Qualitative results video at https://youtu.be/1do9DPFmr38.


095
Phase-Shifting Coder: Predicting Accurate Orientation in Oriented Object Detection

Yi Yu · Feipeng Da

With the vigorous development of computer vision, oriented object detection has gradually been featured. In this paper, a novel differentiable angle coder named phase-shifting coder (PSC) is proposed to accurately predict the orientation of objects, along with a dual-frequency version (PSCD). By mapping the rotational periodicity of different cycles into the phase of different frequencies, we provide a unified framework for various periodic fuzzy problems caused by rotational symmetry in oriented object detection. Upon such a framework, common problems in oriented object detection such as boundary discontinuity and square-like problems are elegantly solved in a unified form. Visual analysis and experiments on three datasets prove the effectiveness and the potentiality of our approach. When facing scenarios requiring high-quality bounding boxes, the proposed methods are expected to give a competitive performance. The codes are publicly available at https://github.com/open-mmlab/mmrotate.


096
Learned Two-Plane Perspective Prior Based Image Resampling for Efficient Object Detection

Anurag Ghosh · N. Dinesh Reddy · Christoph Mertz · Srinivasa G. Narasimhan

Real-time efficient perception is critical for autonomous navigation and city scale sensing. Orthogonal to architectural improvements, streaming perception approaches have exploited adaptive sampling improving real-time detection performance. In this work, we propose a learnable geometry-guided prior that incorporates rough geometry of the 3D scene (a ground plane and a plane above) to resample images for efficient object detection. This significantly improves small and far-away object detection performance while also being more efficient both in terms of latency and memory. For autonomous navigation, using the same detector and scale, our approach improves detection rate by +4.1 APS or +39% and in real-time performance by +5.3 sAPS or +63% for small objects over state-of-the-art (SOTA). For fixed traffic cameras, our approach detects small objects at image scales other methods cannot. At the same scale, our approach improves detection of small objects by 195% (+12.5 APS) over naive-downsampling and 63% (+4.2 APS) over SOTA.


097
Resource-Efficient RGBD Aerial Tracking

Jinyu Yang · Shang Gao · Zhe Li · Feng Zheng · Aleš Leonardis

Aerial robots are now able to fly in complex environments, and drone-captured data gains lots of attention in object tracking. However, current research on aerial perception has mainly focused on limited categories, such as pedestrian or vehicle, and most scenes are captured in urban environments from a birds-eye view. Recently, UAVs equipped with depth cameras have been also deployed for more complex applications, while RGBD aerial tracking is still unexplored. Compared with traditional RGB object tracking, adding depth information can more effectively deal with more challenging scenes such as target and background interference. To this end, in this paper, we explore RGBD aerial tracking in an overhead space, which can greatly enlarge the development of drone-based visual perception. To boost the research, we first propose a large-scale benchmark for RGBD aerial tracking, containing 1,000 drone-captured RGBD videos with dense annotations. Then, as drone-based applications require for real-time processing with limited computational resources, we also propose an efficient RGBD tracker named EMT. Our tracker runs at over 100 fps on GPU, and 25 fps on the edge platform of NVidia Jetson NX Xavier, benefiting from its efficient multimodal fusion and feature matching. Extensive experiments show that our EMT achieves promising tracking performance. All resources are available at https://github.com/yjybuaa/RGBDAerialTracking.


098
Toward RAW Object Detection: A New Benchmark and a New Model

Ruikang Xu · Chang Chen · Jingyang Peng · Cheng Li · Yibin Huang · Fenglong Song · Youliang Yan · Zhiwei Xiong

In many computer vision applications (e.g., robotics and autonomous driving), high dynamic range (HDR) data is necessary for object detection algorithms to handle a variety of lighting conditions, such as strong glare. In this paper, we aim to achieve object detection on RAW sensor data, which naturally saves the HDR information from image sensors without extra equipment costs. We build a novel RAW sensor dataset, named ROD, for Deep Neural Networks (DNNs)-based object detection algorithms to be applied to HDR data. The ROD dataset contains a large amount of annotated instances of day and night driving scenes in 24-bit dynamic range. Based on the dataset, we first investigate the impact of dynamic range for DNNs-based detectors and demonstrate the importance of dynamic range adjustment for detection on RAW sensor data. Then, we propose a simple and effective adjustment method for object detection on HDR RAW sensor data, which is image adaptive and jointly optimized with the downstream detector in an end-to-end scheme. Extensive experiments demonstrate that the performance of detection on RAW sensor data is significantly superior to standard dynamic range (SDR) data in different situations. Moreover, we analyze the influence of texture information and pixel distribution of input data on the performance of the DNNs-based detector.


099
Bi-LRFusion: Bi-Directional LiDAR-Radar Fusion for 3D Dynamic Object Detection

Yingjie Wang · Jiajun Deng · Yao Li · Jinshui Hu · Cong Liu · Yu Zhang · Jianmin Ji · Wanli Ouyang · Yanyong Zhang

LiDAR and Radar are two complementary sensing approaches in that LiDAR specializes in capturing an object’s 3D shape while Radar provides longer detection ranges as well as velocity hints. Though seemingly natural, how to efficiently combine them for improved feature representation is still unclear. The main challenge arises from that Radar data are extremely sparse and lack height information. Therefore, directly integrating Radar features into LiDAR-centric detection networks is not optimal. In this work, we introduce a bi-directional LiDAR-Radar fusion framework, termed Bi-LRFusion, to tackle the challenges and improve 3D detection for dynamic objects. Technically, Bi-LRFusion involves two steps: first, it enriches Radar’s local features by learning important details from the LiDAR branch to alleviate the problems caused by the absence of height information and extreme sparsity; second, it combines LiDAR features with the enhanced Radar features in a unified bird’s-eye-view representation. We conduct extensive experiments on nuScenes and ORR datasets, and show that our Bi-LRFusion achieves state-of-the-art performance for detecting dynamic objects. Notably, Radar data in these two datasets have different formats, which demonstrates the generalizability of our method. Codes will be published.


100
LiDAR-in-the-Loop Hyperparameter Optimization

Félix Goudreault · Dominik Scheuble · Mario Bijelic · Nicolas Robidoux · Felix Heide

LiDAR has become a cornerstone sensing modality for 3D vision. LiDAR systems emit pulses of light into the scene, take measurements of the returned signal, and rely on hardware digital signal processing (DSP) pipelines to construct 3D point clouds from these measurements. The resulting point clouds output by these DSPs are input to downstream 3D vision models -- both, in the form of training datasets or as input at inference time. Existing LiDAR DSPs are composed of cascades of parameterized operations; modifying configuration parameters results in significant changes in the point clouds and consequently the output of downstream methods. Existing methods treat LiDAR systems as fixed black boxes and construct downstream task networks more robust with respect to measurement fluctuations. Departing from this approach, the proposed method directly optimizes LiDAR sensing and DSP parameters for downstream tasks. To investigate the optimization of LiDAR system parameters, we devise a realistic LiDAR simulation method that generates raw waveforms as input to a LiDAR DSP pipeline. We optimize LiDAR parameters for both 3D object detection IoU losses and depth error metrics by solving a nonlinear multi-objective optimization problem with a 0th-order stochastic algorithm. For automotive 3D object detection models, the proposed method outperforms manual expert tuning by 39.5% mean Average Precision (mAP).


101
Learning and Aggregating Lane Graphs for Urban Automated Driving

Martin Büchner · Jannik Zürn · Ion-George Todoran · Abhinav Valada · Wolfram Burgard

Lane graph estimation is an essential and highly challenging task in automated driving and HD map learning. Existing methods using either onboard or aerial imagery struggle with complex lane topologies, out-of-distribution scenarios, or significant occlusions in the image space. Moreover, merging overlapping lane graphs to obtain consistent largescale graphs remains difficult. To overcome these challenges, we propose a novel bottom-up approach to lane graph estimation from aerial imagery that aggregates multiple overlapping graphs into a single consistent graph. Due to its modular design, our method allows us to address two complementary tasks: predicting ego-respective successor lane graphs from arbitrary vehicle positions using a graph neural network and aggregating these predictions into a consistent global lane graph. Extensive experiments on a large-scale lane graph dataset demonstrate that our approach yields highly accurate lane graphs, even in regions with severe occlusions. The presented approach to graph aggregation proves to eliminate inconsistent predictions while increasing the overall graph quality. We make our large-scale urban lane graph dataset and code publicly available at http://urbanlanegraph.cs.uni-freiburg.de.


102
Center Focusing Network for Real-Time LiDAR Panoptic Segmentation

Xiaoyan Li · Gang Zhang · Boyue Wang · Yongli Hu · Baocai Yin

LiDAR panoptic segmentation facilitates an autonomous vehicle to comprehensively understand the surrounding objects and scenes and is required to run in real time. The recent proposal-free methods accelerate the algorithm, but their effectiveness and efficiency are still limited owing to the difficulty of modeling non-existent instance centers and the costly center-based clustering modules. To achieve accurate and real-time LiDAR panoptic segmentation, a novel center focusing network (CFNet) is introduced. Specifically, the center focusing feature encoding (CFFE) is proposed to explicitly understand the relationships between the original LiDAR points and virtual instance centers by shifting the LiDAR points and filling in the center points. Moreover, to leverage the redundantly detected centers, a fast center deduplication module (CDM) is proposed to select only one center for each instance. Experiments on the SemanticKITTI and nuScenes panoptic segmentation benchmarks demonstrate that our CFNet outperforms all existing methods by a large margin and is 1.6 times faster than the most efficient method.


103
Adaptive Sparse Convolutional Networks With Global Context Enhancement for Faster Object Detection on Drone Images

Bowei Du · Yecheng Huang · Jiaxin Chen · Di Huang

Object detection on drone images with low-latency is an important but challenging task on the resource-constrained unmanned aerial vehicle (UAV) platform. This paper investigates optimizing the detection head based on the sparse convolution, which proves effective in balancing the accuracy and efficiency. Nevertheless, it suffers from inadequate integration of contextual information of tiny objects as well as clumsy control of the mask ratio in the presence of foreground with varying scales. To address the issues above, we propose a novel global context-enhanced adaptive sparse convolutional network (CEASC). It first develops a context-enhanced group normalization (CE-GN) layer, by replacing the statistics based on sparsely sampled features with the global contextual ones, and then designs an adaptive multi-layer masking strategy to generate optimal mask ratios at distinct scales for compact foreground coverage, promoting both the accuracy and efficiency. Extensive experimental results on two major benchmarks, i.e. VisDrone and UAVDT, demonstrate that CEASC remarkably reduces the GFLOPs and accelerates the inference procedure when plugging into the typical state-of-the-art detection frameworks (e.g. RetinaNet and GFL V1) with competitive performance. Code is available at https://github.com/Cuogeihong/CEASC.


104
MV-JAR: Masked Voxel Jigsaw and Reconstruction for LiDAR-Based Self-Supervised Pre-Training

Runsen Xu · Tai Wang · Wenwei Zhang · Runjian Chen · Jinkun Cao · Jiangmiao Pang · Dahua Lin

This paper introduces the Masked Voxel Jigsaw and Reconstruction (MV-JAR) method for LiDAR-based self-supervised pre-training and a carefully designed data-efficient 3D object detection benchmark on the Waymo dataset. Inspired by the scene-voxel-point hierarchy in downstream 3D object detectors, we design masking and reconstruction strategies accounting for voxel distributions in the scene and local point distributions within the voxel. We employ a Reversed-Furthest-Voxel-Sampling strategy to address the uneven distribution of LiDAR points and propose MV-JAR, which combines two techniques for modeling the aforementioned distributions, resulting in superior performance. Our experiments reveal limitations in previous data-efficient experiments, which uniformly sample fine-tuning splits with varying data proportions from each LiDAR sequence, leading to similar data diversity across splits. To address this, we propose a new benchmark that samples scene sequences for diverse fine-tuning splits, ensuring adequate model convergence and providing a more accurate evaluation of pre-training methods. Experiments on our Waymo benchmark and the KITTI dataset demonstrate that MV-JAR consistently and significantly improves 3D detection performance across various data scales, achieving up to a 6.3% increase in mAPH compared to training from scratch. Codes and the benchmark are available at https://github.com/SmartBot-PJLab/MV-JAR.


105
ALSO: Automotive Lidar Self-Supervision by Occupancy Estimation

Alexandre Boulch · Corentin Sautier · Björn Michele · Gilles Puy · Renaud Marlet

We propose a new self-supervised method for pre-training the backbone of deep perception models operating on point clouds. The core idea is to train the model on a pretext task which is the reconstruction of the surface on which the 3D points are sampled, and to use the underlying latent vectors as input to the perception head. The intuition is that if the network is able to reconstruct the scene surface, given only sparse input points, then it probably also captures some fragments of semantic information, that can be used to boost an actual perception task. This principle has a very simple formulation, which makes it both easy to implement and widely applicable to a large range of 3D sensors and deep networks performing semantic segmentation or object detection. In fact, it supports a single-stream pipeline, as opposed to most contrastive learning approaches, allowing training on limited resources. We conducted extensive experiments on various autonomous driving datasets, involving very different kinds of lidars, for both semantic segmentation and object detection. The results show the effectiveness of our method to learn useful representations without any annotation, compared to existing approaches. The code is available at github.com/valeoai/ALSO


106
Unsupervised Intrinsic Image Decomposition With LiDAR Intensity

Shogo Sato · Yasuhiro Yao · Taiga Yoshida · Takuhiro Kaneko · Shingo Ando · Jun Shimamura

Intrinsic image decomposition (IID) is the task that decomposes a natural image into albedo and shade. While IID is typically solved through supervised learning methods, it is not ideal due to the difficulty in observing ground truth albedo and shade in general scenes. Conversely, unsupervised learning methods are currently underperforming supervised learning methods since there are no criteria for solving the ill-posed problems. Recently, light detection and ranging (LiDAR) is widely used due to its ability to make highly precise distance measurements. Thus, we have focused on the utilization of LiDAR, especially LiDAR intensity, to address this issue. In this paper, we propose unsupervised intrinsic image decomposition with LiDAR intensity (IID-LI). Since the conventional unsupervised learning methods consist of image-to-image transformations, simply inputting LiDAR intensity is not an effective approach. Therefore, we design an intensity consistency loss that computes the error between LiDAR intensity and gray-scaled albedo to provide a criterion for the ill-posed problem. In addition, LiDAR intensity is difficult to handle due to its sparsity and occlusion, hence, a LiDAR intensity densification module is proposed. We verified the estimating quality using our own dataset, which include RGB images, LiDAR intensity and human judged annotations. As a result, we achieved an estimation accuracy that outperforms conventional unsupervised learning methods.


107
PVT-SSD: Single-Stage 3D Object Detector With Point-Voxel Transformer

Honghui Yang · Wenxiao Wang · Minghao Chen · Binbin Lin · Tong He · Hua Chen · Xiaofei He · Wanli Ouyang

Recent Transformer-based 3D object detectors learn point cloud features either from point- or voxel-based representations. However, the former requires time-consuming sampling while the latter introduces quantization errors. In this paper, we present a novel Point-Voxel Transformer for single-stage 3D detection (PVT-SSD) that takes advantage of these two representations. Specifically, we first use voxel-based sparse convolutions for efficient feature encoding. Then, we propose a Point-Voxel Transformer (PVT) module that obtains long-range contexts in a cheap manner from voxels while attaining accurate positions from points. The key to associating the two different representations is our introduced input-dependent Query Initialization module, which could efficiently generate reference points and content queries. Then, PVT adaptively fuses long-range contextual and local geometric information around reference points into content queries. Further, to quickly find the neighboring points of reference points, we design the Virtual Range Image module, which generalizes the native range image to multi-sensor and multi-frame. The experiments on several autonomous driving benchmarks verify the effectiveness and efficiency of the proposed method. Code will be available.


108
LargeKernel3D: Scaling Up Kernels in 3D Sparse CNNs

Yukang Chen · Jianhui Liu · Xiangyu Zhang · Xiaojuan Qi · Jiaya Jia

Recent advance in 2D CNNs has revealed that large kernels are important. However, when directly applying large convolutional kernels in 3D CNNs, severe difficulties are met, where those successful module designs in 2D become surprisingly ineffective on 3D networks, including the popular depth-wise convolution. To address this vital challenge, we instead propose the spatial-wise partition convolution and its large-kernel module. As a result, it avoids the optimization and efficiency issues of naive 3D large kernels. Our large-kernel 3D CNN network, LargeKernel3D, yields notable improvement in 3D tasks of semantic segmentation and object detection. It achieves 73.9% mIoU on the ScanNetv2 semantic segmentation and 72.8% NDS nuScenes object detection benchmarks, ranking 1st on the nuScenes LIDAR leaderboard. The performance further boosts to 74.2% NDS with a simple multi-modal fusion. In addition, LargeKernel3D can be scaled to 17x17x17 kernel size on Waymo 3D object detection. For the first time, we show that large kernels are feasible and essential for 3D visual tasks.


109
WeatherStream: Light Transport Automation of Single Image Deweathering

Howard Zhang · Yunhao Ba · Ethan Yang · Varan Mehra · Blake Gella · Akira Suzuki · Arnold Pfahnl · Chethan Chinder Chandrappa · Alex Wong · Achuta Kadambi

Today single image deweathering is arguably more sensitive to the dataset type, rather than the model. We introduce WeatherStream, an automatic pipeline capturing all real-world weather effects (rain, snow, and rain fog degradations), along with their clean image pairs. Previous state-of-the-art methods that have attempted the all-weather removal task train on synthetic pairs, and are thus limited by the Sim2Real domain gap. Recent work has attempted to manually collect time multiplexed pairs, but the use of human labor limits the scale of such a dataset. We introduce a pipeline that uses the power of light-transport physics and a model trained on a small, initial seed dataset to reject approximately 99.6% of unwanted scenes. The pipeline is able to generalize to new scenes and degradations that can, in turn, be used to train existing models just like fully human-labeled data. Training on a dataset collected through this procedure leads to significant improvements on multiple existing weather removal methods on a carefully human-collected test set of real-world weather effects. The dataset and code can be found in the following website: http://visual.ee.ucla.edu/wstream.htm/.


110
Mask3D: Pre-Training 2D Vision Transformers by Learning Masked 3D Priors

Ji Hou · Xiaoliang Dai · Zijian He · Angela Dai · Matthias Nießner

Current popular backbones in computer vision, such as Vision Transformers (ViT) and ResNets are trained to perceive the world from 2D images. However, to more effectively understand 3D structural priors in 2D backbones, we propose Mask3D to leverage existing large-scale RGB-D data in a self-supervised pre-training to embed these 3D priors into 2D learned feature representations. In contrast to traditional 3D contrastive learning paradigms requiring 3D reconstructions or multi-view correspondences, our approach is simple: we formulate a pre-text reconstruction task by masking RGB and depth patches in individual RGB-D frames. We demonstrate the Mask3D is particularly effective in embedding 3D priors into the powerful 2D ViT backbone, enabling improved representation learn- ing for various scene understanding tasks, such as semantic segmentation, instance segmentation and object detection. Experiments show that Mask3D notably outperforms exist- ing self-supervised 3D pre-training approaches on ScanNet, NYUv2, and Cityscapes image understanding tasks, with an improvement of +6.5% mIoU against the state-of-the-art Pri3D on ScanNet image semantic segmentation.


111
DSVT: Dynamic Sparse Voxel Transformer With Rotated Sets

Haiyang Wang · Chen Shi · Shaoshuai Shi · Meng Lei · Sen Wang · Di He · Bernt Schiele · Liwei Wang

Designing an efficient yet deployment-friendly 3D backbone to handle sparse point clouds is a fundamental problem in 3D perception. Compared with the customized sparse convolution, the attention mechanism in Transformers is more appropriate for flexibly modeling long-range relationships and is easier to be deployed in real-world applications. However, due to the sparse characteristics of point clouds, it is non-trivial to apply a standard transformer on sparse points. In this paper, we present Dynamic Sparse Voxel Transformer (DSVT), a single-stride window-based voxel Transformer backbone for outdoor 3D perception. In order to efficiently process sparse points in parallel, we propose Dynamic Sparse Window Attention, which partitions a series of local regions in each window according to its sparsity and then computes the features of all regions in a fully parallel manner. To allow the cross-set connection, we design a rotated set partitioning strategy that alternates between two partitioning configurations in consecutive self-attention layers. To support effective downsampling and better encode geometric information, we also propose an attention-style 3D pooling module on sparse points, which is powerful and deployment-friendly without utilizing any customized CUDA operations. Our model achieves state-of-the-art performance with a broad range of 3D perception tasks. More importantly, DSVT can be easily deployed by TensorRT with real-time inference speed (27Hz). Code will be available at https://github.com/Haiyang-W/DSVT.


112
IterativePFN: True Iterative Point Cloud Filtering

Dasith de Silva Edirimuni · Xuequan Lu · Zhiwen Shao · Gang Li · Antonio Robles-Kelly · Ying He

The quality of point clouds is often limited by noise introduced during their capture process. Consequently, a fundamental 3D vision task is the removal of noise, known as point cloud filtering or denoising. State-of-the-art learning based methods focus on training neural networks to infer filtered displacements and directly shift noisy points onto the underlying clean surfaces. In high noise conditions, they iterate the filtering process. However, this iterative filtering is only done at test time and is less effective at ensuring points converge quickly onto the clean surfaces. We propose IterativePFN (iterative point cloud filtering network), which consists of multiple IterationModules that model the true iterative filtering process internally, within a single network. We train our IterativePFN network using a novel loss function that utilizes an adaptive ground truth target at each iteration to capture the relationship between intermediate filtering results during training. This ensures that the filtered results converge faster to the clean surfaces. Our method is able to obtain better performance compared to state-of-the-art methods. The source code can be found at: https://github.com/ddsediri/IterativePFN.


113
itKD: Interchange Transfer-Based Knowledge Distillation for 3D Object Detection

Hyeon Cho · Junyong Choi · Geonwoo Baek · Wonjun Hwang

Point-cloud based 3D object detectors recently have achieved remarkable progress. However, most studies are limited to the development of network architectures for improving only their accuracy without consideration of the computational efficiency. In this paper, we first propose an autoencoder-style framework comprising channel-wise compression and decompression via interchange transfer-based knowledge distillation. To learn the map-view feature of a teacher network, the features from teacher and student networks are independently passed through the shared autoencoder; here, we use a compressed representation loss that binds the channel-wised compression knowledge from both student and teacher networks as a kind of regularization. The decompressed features are transferred in opposite directions to reduce the gap in the interchange reconstructions. Lastly, we present an head attention loss to match the 3D object detection information drawn by the multi-head self-attention mechanism. Through extensive experiments, we verify that our method can train the lightweight model that is well-aligned with the 3D point cloud detection task and we demonstrate its superiority using the well-known public datasets; e.g., Waymo and nuScenes.


114
ISBNet: A 3D Point Cloud Instance Segmentation Network With Instance-Aware Sampling and Box-Aware Dynamic Convolution

Tuan Duc Ngo · Binh-Son Hua · Khoi Nguyen

Existing 3D instance segmentation methods are predominated by the bottom-up design -- manually fine-tuned algorithm to group points into clusters followed by a refinement network. However, by relying on the quality of the clusters, these methods generate susceptible results when (1) nearby objects with the same semantic class are packed together, or (2) large objects with loosely connected regions. To address these limitations, we introduce ISBNet, a novel cluster-free method that represents instances as kernels and decodes instance masks via dynamic convolution. To efficiently generate high-recall and discriminative kernels, we propose a simple strategy named Instance-aware Farthest Point Sampling to sample candidates and leverage the local aggregation layer inspired by PointNet++ to encode candidate features. Moreover, we show that predicting and leveraging the 3D axis-aligned bounding boxes in the dynamic convolution further boosts performance. Our method set new state-of-the-art results on ScanNetV2 (55.9), S3DIS (60.8), and STPLS3D (49.2) in terms of AP and retains fast inference time (237ms per scene on ScanNetV2). The source code and trained models are available at https://github.com/VinAIResearch/ISBNet.


115
Symmetric Shape-Preserving Autoencoder for Unsupervised Real Scene Point Cloud Completion

Changfeng Ma · Yinuo Chen · Pengxiao Guo · Jie Guo · Chongjun Wang · Yanwen Guo

Unsupervised completion of real scene objects is of vital importance but still remains extremely challenging in preserving input shapes, predicting accurate results, and adapting to multi-category data. To solve these problems, we propose in this paper an Unsupervised Symmetric Shape-Preserving Autoencoding Network, termed USSPA, to predict complete point clouds of objects from real scenes. One of our main observations is that many natural and man-made objects exhibit significant symmetries. To accommodate this, we devise a symmetry learning module to learn from those objects and to preserve structural symmetries. Starting from an initial coarse predictor, our autoencoder refines the complete shape with a carefully designed upsampling refinement module. Besides the discriminative process on the latent space, the discriminators of our USSPA also take predicted point clouds as direct guidance, enabling more detailed shape prediction. Clearly different from previous methods which train each category separately, our USSPA can be adapted to the training of multi-category data in one pass through a classifier-guided discriminator, with consistent performance on single category. For more accurate evaluation, we contribute to the community a real scene dataset with paired CAD models as ground truth. Extensive experiments and comparisons demonstrate our superiority and generalization and show that our method achieves state-of-the-art performance on unsupervised completion of real scene objects.


116
GeoMAE: Masked Geometric Target Prediction for Self-Supervised Point Cloud Pre-Training

Xiaoyu Tian · Haoxi Ran · Yue Wang · Hang Zhao

This paper tries to address a fundamental question in point cloud self-supervised learning: what is a good signal we should leverage to learn features from point clouds without annotations? To answer that, we introduce a point cloud representation learning framework, based on geometric feature reconstruction. In contrast to recent papers that directly adopt masked autoencoder (MAE) and only predict original coordinates or occupancy from masked point clouds, our method revisits differences between images and point clouds and identifies three self-supervised learning objectives peculiar to point clouds, namely centroid prediction, normal estimation, and curvature prediction. Combined, these three objectives yield an nontrivial self-supervised learning task and mutually facilitate models to better reason fine-grained geometry of point clouds. Our pipeline is conceptually simple and it consists of two major steps: first, it randomly masks out groups of points, followed by a Transformer-based point cloud encoder; second, a lightweight Transformer decoder predicts centroid, normal, and curvature for points in each voxel. We transfer the pre-trained Transformer encoder to a downstream peception model. On the nuScene Datset, our model achieves 3.38 mAP improvment for object detection, 2.1 mIoU gain for segmentation, and 1.7 AMOTA gain for multi-object tracking. We also conduct experiments on the Waymo Open Dataset and achieve significant performance improvements over baselines as well.


117
AnchorFormer: Point Cloud Completion From Discriminative Nodes

Zhikai Chen · Fuchen Long · Zhaofan Qiu · Ting Yao · Wengang Zhou · Jiebo Luo · Tao Mei

Point cloud completion aims to recover the completed 3D shape of an object from its partial observation. A common strategy is to encode the observed points to a global feature vector and then predict the complete points through a generative process on this vector. Nevertheless, the results may suffer from the high-quality shape generation problem due to the fact that a global feature vector cannot sufficiently characterize diverse patterns in one object. In this paper, we present a new shape completion architecture, namely AnchorFormer, that innovatively leverages pattern-aware discriminative nodes, i.e., anchors, to dynamically capture regional information of objects. Technically, AnchorFormer models the regional discrimination by learning a set of anchors based on the point features of the input partial observation. Such anchors are scattered to both observed and unobserved locations through estimating particular offsets, and form sparse points together with the down-sampled points of the input observation. To reconstruct the fine-grained object patterns, AnchorFormer further employs a modulation scheme to morph a canonical 2D grid at individual locations of the sparse points into a detailed 3D structure. Extensive experiments on the PCN, ShapeNet-55/34 and KITTI datasets quantitatively and qualitatively demonstrate the efficacy of AnchorFormer over the state-of-the-art point cloud completion approaches. Source code is available at https://github.com/chenzhik/AnchorFormer.


118
SHS-Net: Learning Signed Hyper Surfaces for Oriented Normal Estimation of Point Clouds

Qing Li · Huifang Feng · Kanle Shi · Yue Gao · Yi Fang · Yu-Shen Liu · Zhizhong Han

We propose a novel method called SHS-Net for oriented normal estimation of point clouds by learning signed hyper surfaces, which can accurately predict normals with global consistent orientation from various point clouds. Almost all existing methods estimate oriented normals through a two-stage pipeline, i.e., unoriented normal estimation and normal orientation, and each step is implemented by a separate algorithm. However, previous methods are sensitive to parameter settings, resulting in poor results from point clouds with noise, density variations and complex geometries. In this work, we introduce signed hyper surfaces (SHS), which are parameterized by multi-layer perceptron (MLP) layers, to learn to estimate oriented normals from point clouds in an end-to-end manner. The signed hyper surfaces are implicitly learned in a high-dimensional feature space where the local and global information is aggregated. Specifically, we introduce a patch encoding module and a shape encoding module to encode a 3D point cloud into a local latent code and a global latent code, respectively. Then, an attention-weighted normal prediction module is proposed as a decoder, which takes the local and global latent codes as input to predict oriented normals. Experimental results show that our SHS-Net outperforms the state-of-the-art methods in both unoriented and oriented normal estimation on the widely used benchmarks. The code, data and pretrained models are available at https://github.com/LeoQLi/SHS-Net.


119
NerVE: Neural Volumetric Edges for Parametric Curve Extraction From Point Cloud

Xiangyu Zhu · Dong Du · Weikai Chen · Zhiyou Zhao · Yinyu Nie · Xiaoguang Han

Extracting parametric edge curves from point clouds is a fundamental problem in 3D vision and geometry processing. Existing approaches mainly rely on keypoint detection, a challenging procedure that tends to generate noisy output, making the subsequent edge extraction error-prone. To address this issue, we propose to directly detect structured edges to circumvent the limitations of the previous point-wise methods. We achieve this goal by presenting NerVE, a novel neural volumetric edge representation that can be easily learned through a volumetric learning framework. NerVE can be seamlessly converted to a versatile piece-wise linear (PWL) curve representation, enabling a unified strategy for learning all types of free-form curves. Furthermore, as NerVE encodes rich structural information, we show that edge extraction based on NerVE can be reduced to a simple graph search problem. After converting NerVE to the PWL representation, parametric curves can be obtained via off-the-shelf spline fitting algorithms. We evaluate our method on the challenging ABC dataset. We show that a simple network based on NerVE can already outperform the previous state-of-the-art methods by a great margin.


120
Unsupervised Deep Probabilistic Approach for Partial Point Cloud Registration

Guofeng Mei · Hao Tang · Xiaoshui Huang · Weijie Wang · Juan Liu · Jian Zhang · Luc Van Gool · Qiang Wu

Deep point cloud registration methods face challenges to partial overlaps and rely on labeled data. To address these issues, we propose UDPReg, an unsupervised deep probabilistic registration framework for point clouds with partial overlaps. Specifically, we first adopt a network to learn posterior probability distributions of Gaussian mixture models (GMMs) from point clouds. To handle partial point cloud registration, we apply the Sinkhorn algorithm to predict the distribution-level correspondences under the constraint of the mixing weights of GMMs. To enable unsupervised learning, we design three distribution consistency-based losses: self-consistency, cross-consistency, and local contrastive. The self-consistency loss is formulated by encouraging GMMs in Euclidean and feature spaces to share identical posterior distributions. The cross-consistency loss derives from the fact that the points of two partially overlapping point clouds belonging to the same clusters share the cluster centroids. The cross-consistency loss allows the network to flexibly learn a transformation-invariant posterior distribution of two aligned point clouds. The local contrastive loss facilitates the network to extract discriminative local features. Our UDPReg achieves competitive performance on the 3DMatch/3DLoMatch and ModelNet/ModelLoNet benchmarks.


121
Local Connectivity-Based Density Estimation for Face Clustering

Junho Shin · Hyo-Jun Lee · Hyunseop Kim · Jong-Hyeon Baek · Daehyun Kim · Yeong Jun Koh

Recent graph-based face clustering methods predict the connectivity of enormous edges, including false positive edges that link nodes with different classes. However, those false positive edges, which connect negative node pairs, have the risk of integration of different clusters when their connectivity is incorrectly estimated. This paper proposes a novel face clustering method to address this problem. The proposed clustering method employs density-based clustering, which maintains edges that have higher density. For this purpose, we propose a reliable density estimation algorithm based on local connectivity between K nearest neighbors (KNN). We effectively exclude negative pairs from the KNN graph based on the reliable density while maintaining sufficient positive pairs. Furthermore, we develop a pairwise connectivity estimation network to predict the connectivity of the selected edges. Experimental results demonstrate that the proposed clustering method significantly outperforms the state-of-the-art clustering methods on large-scale face clustering datasets and fashion image clustering datasets. Our code is available at https://github.com/illian01/LCE-PCENet


122
Bridging Search Region Interaction With Template for RGB-T Tracking

Tianrui Hui · Zizheng Xun · Fengguang Peng · Junshi Huang · Xiaoming Wei · Xiaolin Wei · Jiao Dai · Jizhong Han · Si Liu

RGB-T tracking aims to leverage the mutual enhancement and complement ability of RGB and TIR modalities for improving the tracking process in various scenarios, where cross-modal interaction is the key component. Some previous methods concatenate the RGB and TIR search region features directly to perform a coarse interaction process with redundant background noises introduced. Many other methods sample candidate boxes from search frames and conduct various fusion approaches on isolated pairs of RGB and TIR boxes, which limits the cross-modal interaction within local regions and brings about inadequate context modeling. To alleviate these limitations, we propose a novel Template-Bridged Search region Interaction (TBSI) module which exploits templates as the medium to bridge the cross-modal interaction between RGB and TIR search regions by gathering and distributing target-relevant object and environment contexts. Original templates are also updated with enriched multimodal contexts from the template medium. Our TBSI module is inserted into a ViT backbone for joint feature extraction, search-template matching, and cross-modal interaction. Extensive experiments on three popular RGB-T tracking benchmarks demonstrate our method achieves new state-of-the-art performances. Code is available at https://github.com/RyanHTR/TBSI.


123
Highlight
Quantum Multi-Model Fitting

Matteo Farina · Luca Magri · Willi Menapace · Elisa Ricci · Vladislav Golyanik · Federica Arrigoni

Geometric model fitting is a challenging but fundamental computer vision problem. Recently, quantum optimization has been shown to enhance robust fitting for the case of a single model, while leaving the question of multi-model fitting open. In response to this challenge, this paper shows that the latter case can significantly benefit from quantum hardware and proposes the first quantum approach to multi-model fitting (MMF). We formulate MMF as a problem that can be efficiently sampled by modern adiabatic quantum computers without the relaxation of the objective function. We also propose an iterative and decomposed version of our method, which supports real-world-sized problems. The experimental evaluation demonstrates promising results on a variety of datasets. The source code is available at https://github.com/FarinaMatteo/qmmf.


124
Highlight
Generalizable Local Feature Pre-Training for Deformable Shape Analysis

Souhaib Attaiki · Lei Li · Maks Ovsjanikov

Transfer learning is fundamental for addressing problems in settings with little training data. While several transfer learning approaches have been proposed in 3D, unfortunately, these solutions typically operate on an entire 3D object or even scene-level and thus, as we show, fail to generalize to new classes, such as deformable organic shapes. In addition, there is currently a lack of understanding of what makes pre-trained features transferable across significantly different 3D shape categories. In this paper, we make a step toward addressing these challenges. First, we analyze the link between feature locality and transferability in tasks involving deformable 3D objects, while also comparing different backbones and losses for local feature pre-training. We observe that with proper training, learned features can be useful in such tasks, but, crucially, only with an appropriate choice of the receptive field size. We then propose a differentiable method for optimizing the receptive field within 3D transfer learning. Jointly, this leads to the first learnable features that can successfully generalize to unseen classes of 3D shapes such as humans and animals. Our extensive experiments show that this approach leads to state-of-the-art results on several downstream tasks such as segmentation, shape correspondence, and classification. Our code is available at https://github.com/pvnieo/vader.


125
Similarity Metric Learning for RGB-Infrared Group Re-Identification

Jianghao Xiong · Jianhuang Lai

Group re-identification (G-ReID) aims to re-identify a group of people that is observed from non-overlapping camera systems. The existing literature has mainly addressed RGB-based problems, but RGB-infrared (RGB-IR) cross-modality matching problem has not been studied yet. In this paper, we propose a metric learning method Closest Permutation Matching (CPM) for RGB-IR G-ReID. We model each group as a set of single-person features which are extracted by MPANet, then we propose the metric Closest Permutation Distance (CPD) to measure the similarity between two sets of features. CPD is invariant with order changes of group members so that it solves the layout change problem in G-ReID. Furthermore, we introduce the problem of G-ReID without person labels. In the weak-supervised case, we design the Relation-aware Module (RAM) that exploits visual context and relations among group members to produce a modality-invariant order of features in each group, with which group member features within a set can be sorted to form a robust group representation against modality change. To support the study on RGB-IR G-ReID, we construct a new large-scale RGB-IR G-ReID dataset CM-Group. The dataset contains 15,440 RGB images and 15,506 infrared images of 427 groups and 1,013 identities. Extensive experiments on the new dataset demonstrate the effectiveness of the proposed models and the complexity of CM-Group. The code and dataset are available at: https://github.com/WhollyOat/CM-Group.


126
Unsupervised Deep Asymmetric Stereo Matching With Spatially-Adaptive Self-Similarity

Taeyong Song · Sunok Kim · Kwanghoon Sohn

Unsupervised stereo matching has received a lot of attention since it enables the learning of disparity estimation without ground-truth data. However, most of the unsupervised stereo matching algorithms assume that the left and right images have consistent visual properties, i.e., symmetric, and easily fail when the stereo images are asymmetric. In this paper, we present a novel spatially-adaptive self-similarity (SASS) for unsupervised asymmetric stereo matching. It extends the concept of self-similarity and generates deep features that are robust to the asymmetries. The sampling patterns to calculate self-similarities are adaptively generated throughout the image regions to effectively encode diverse patterns. In order to learn the effective sampling patterns, we design a contrastive similarity loss with positive and negative weights. Consequently, SASS is further encouraged to encode asymmetry-agnostic features, while maintaining the distinctiveness for stereo correspondence. We present extensive experimental results including ablation studies and comparisons with different methods, demonstrating effectiveness of the proposed method under resolution and noise asymmetries.


127
Sliced Optimal Partial Transport

Yikun Bai · Bernhard Schmitzer · Matthew Thorpe · Soheil Kolouri

Optimal transport (OT) has become exceedingly popular in machine learning, data science, and computer vision. The core assumption in the OT problem is the equal total amount of mass in source and target measures, which limits its application. Optimal Partial Transport (OPT) is a recently proposed solution to this limitation. Similar to the OT problem, the computation of OPT relies on solving a linear programming problem (often in high dimensions), which can become computationally prohibitive. In this paper, we propose an efficient algorithm for calculating the OPT problem between two non-negative measures in one dimension. Next, following the idea of sliced OT distances, we utilize slicing to define the sliced OPT distance. Finally, we demonstrate the computational and accuracy benefits of the sliced OPT-based method in various numerical experiments. In particular, we show an application of our proposed Sliced-OPT in noisy point cloud registration.


128
DistractFlow: Improving Optical Flow Estimation via Realistic Distractions and Pseudo-Labeling

Jisoo Jeong · Hong Cai · Risheek Garrepalli · Fatih Porikli

We propose a novel data augmentation approach, DistractFlow, for training optical flow estimation models by introducing realistic distractions to the input frames. Based on a mixing ratio, we combine one of the frames in the pair with a distractor image depicting a similar domain, which allows for inducing visual perturbations congruent with natural objects and scenes. We refer to such pairs as distracted pairs. Our intuition is that using semantically meaningful distractors enables the model to learn related variations and attain robustness against challenging deviations, compared to conventional augmentation schemes focusing only on low-level aspects and modifications. More specifically, in addition to the supervised loss computed between the estimated flow for the original pair and its ground-truth flow, we include a second supervised loss defined between the distracted pair’s flow and the original pair’s ground-truth flow, weighted with the same mixing ratio. Furthermore, when unlabeled data is available, we extend our augmentation approach to self-supervised settings through pseudo-labeling and cross-consistency regularization. Given an original pair and its distracted version, we enforce the estimated flow on the distracted pair to agree with the flow of the original pair. Our approach allows increasing the number of available training pairs significantly without requiring additional annotations. It is agnostic to the model architecture and can be applied to training any optical flow estimation models. Our extensive evaluations on multiple benchmarks, including Sintel, KITTI, and SlowFlow, show that DistractFlow improves existing models consistently, outperforming the latest state of the art.


129
Bayesian Posterior Approximation With Stochastic Ensembles

Oleksandr Balabanov · Bernhard Mehlig · Hampus Linander

We introduce ensembles of stochastic neural networks to approximate the Bayesian posterior, combining stochastic methods such as dropout with deep ensembles. The stochastic ensembles are formulated as families of distributions and trained to approximate the Bayesian posterior with variational inference. We implement stochastic ensembles based on Monte Carlo dropout, DropConnect and a novel non-parametric version of dropout and evaluate them on a toy problem and CIFAR image classification. For both tasks, we test the quality of the posteriors directly against Hamiltonian Monte Carlo simulations. Our results show that stochastic ensembles provide more accurate posterior estimates than other popular baselines for Bayesian inference.


130
Highlight
V2V4Real: A Real-World Large-Scale Dataset for Vehicle-to-Vehicle Cooperative Perception

Runsheng Xu · Xin Xia · JINLONG LI · Hanzhao Li · Shuo Zhang · Zhengzhong Tu · Zonglin Meng · Hao Xiang · Xiaoyu Dong · Rui Song · Hongkai Yu · Bolei Zhou · Jiaqi Ma

Modern perception systems of autonomous vehicles are known to be sensitive to occlusions and lack the capability of long perceiving range. It has been one of the key bottlenecks that prevents Level 5 autonomy. Recent research has demonstrated that the Vehicle-to-Vehicle (V2V) cooperative perception system has great potential to revolutionize the autonomous driving industry. However, the lack of a real-world dataset hinders the progress of this field. To facilitate the development of cooperative perception, we present V2V4Real, the first large-scale real-world multi-modal dataset for V2V perception. The data is collected by two vehicles equipped with multi-modal sensors driving together through diverse scenarios. Our V2V4Real dataset covers a driving area of 410 km, comprising 20K LiDAR frames, 40K RGB frames, 240K annotated 3D bounding boxes for 5 classes, and HDMaps that cover all the driving routes. V2V4Real introduces three perception tasks, including cooperative 3D object detection, cooperative 3D object tracking, and Sim2Real domain adaptation for cooperative perception. We provide comprehensive benchmarks of recent cooperative perception algorithms on three tasks. The V2V4Real dataset can be found at research.seas.ucla.edu/mobility-lab/v2v4real/.


131
ReasonNet: End-to-End Driving With Temporal and Global Reasoning

Hao Shao · Letian Wang · Ruobing Chen · Steven L. Waslander · Hongsheng Li · Yu Liu

The large-scale deployment of autonomous vehicles is yet to come, and one of the major remaining challenges lies in urban dense traffic scenarios. In such cases, it remains challenging to predict the future evolution of the scene and future behaviors of objects, and to deal with rare adverse events such as the sudden appearance of occluded objects. In this paper, we present ReasonNet, a novel end-to-end driving framework that extensively exploits both temporal and global information of the driving scene. By reasoning on the temporal behavior of objects, our method can effectively process the interactions and relationships among features in different frames. Reasoning about the global information of the scene can also improve overall perception performance and benefit the detection of adverse events, especially the anticipation of potential danger from occluded objects. For comprehensive evaluation on occlusion events, we also release publicly a driving simulation benchmark DriveOcclusionSim consisting of diverse occlusion events. We conduct extensive experiments on multiple CARLA benchmarks, where our model outperforms all prior methods, ranking first on the sensor track of the public CARLA Leaderboard.


132
Open-World Multi-Task Control Through Goal-Aware Representation Learning and Adaptive Horizon Prediction

Shaofei Cai · Zihao Wang · Xiaojian Ma · Anji Liu · Yitao Liang

We study the problem of learning goal-conditioned policies in Minecraft, a popular, widely accessible yet challenging open-ended environment for developing human-level multi-task agents. We first identify two main challenges of learning such policies: 1) the indistinguishability of tasks from the state distribution, due to the vast scene diversity, and 2) the non-stationary nature of environment dynamics caused by the partial observability. To tackle the first challenge, we propose Goal-Sensitive Backbone (GSB) for the policy to encourage the emergence of goal-relevant visual state representations. To tackle the second challenge, the policy is further fueled by an adaptive horizon prediction module that helps alleviate the learning uncertainty brought by the non-stationary dynamics. Experiments on 20 Minecraft tasks show that our method significantly outperforms the best baseline so far; in many of them, we double the performance. Our ablation and exploratory studies then explain how our approach beat the counterparts and also unveil the surprising bonus of zero-shot generalization to new scenes (biomes). We hope our agent could help shed some light on learning goal-conditioned, multi-task agents in challenging, open-ended environments like Minecraft.


133
FJMP: Factorized Joint Multi-Agent Motion Prediction Over Learned Directed Acyclic Interaction Graphs

Luke Rowe · Martin Ethier · Eli-Henry Dykhne · Krzysztof Czarnecki

Predicting the future motion of road agents is a critical task in an autonomous driving pipeline. In this work, we address the problem of generating a set of scene-level, or joint, future trajectory predictions in multi-agent driving scenarios. To this end, we propose FJMP, a Factorized Joint Motion Prediction framework for multi-agent interactive driving scenarios. FJMP models the future scene interaction dynamics as a sparse directed interaction graph, where edges denote explicit interactions between agents. We then prune the graph into a directed acyclic graph (DAG) and decompose the joint prediction task into a sequence of marginal and conditional predictions according to the partial ordering of the DAG, where joint future trajectories are decoded using a directed acyclic graph neural network (DAGNN). We conduct experiments on the INTERACTION and Argoverse 2 datasets and demonstrate that FJMP produces more accurate and scene-consistent joint trajectory predictions than non-factorized approaches, especially on the most interactive and kinematically interesting agents. FJMP ranks 1st on the multi-agent test leaderboard of the INTERACTION dataset.


134
Trace and Pace: Controllable Pedestrian Animation via Guided Trajectory Diffusion

Davis Rempe · Zhengyi Luo · Xue Bin Peng · Ye Yuan · Kris Kitani · Karsten Kreis · Sanja Fidler · Or Litany

We introduce a method for generating realistic pedestrian trajectories and full-body animations that can be controlled to meet user-defined goals. We draw on recent advances in guided diffusion modeling to achieve test-time controllability of trajectories, which is normally only associated with rule-based systems. Our guided diffusion model allows users to constrain trajectories through target waypoints, speed, and specified social groups while accounting for the surrounding environment context. This trajectory diffusion model is integrated with a novel physics-based humanoid controller to form a closed-loop, full-body pedestrian animation system capable of placing large crowds in a simulated environment with varying terrains. We further propose utilizing the value function learned during RL training of the animation controller to guide diffusion to produce trajectories better suited for particular scenarios such as collision avoidance and traversing uneven terrain.


135
Galactic: Scaling End-to-End Reinforcement Learning for Rearrangement at 100k Steps-per-Second

Vincent-Pierre Berges · Andrew Szot · Devendra Singh Chaplot · Aaron Gokaslan · Roozbeh Mottaghi · Dhruv Batra · Eric Undersander

We present Galactic, a large-scale simulation and reinforcement-learning (RL) framework for robotic mobile manipulation in indoor environments. Specifically, a Fetch robot (equipped with a mobile base, 7DoF arm, RGBD camera, egomotion, and onboard sensing) is spawned in a home environment and asked to rearrange objects -- by navigating to an object, picking it up, navigating to a target location, and then placing the object at the target location. Galactic is fast. In terms of simulation speed (rendering + physics), Galactic achieves over 421,000 steps-per-second (SPS) on an 8-GPU node, which is 54x faster than Habitat 2.0 (7699 SPS). More importantly, Galactic was designed to optimize the entire rendering+physics+RL interplay since any bottleneck in the interplay slows down training. In terms of simulation+RL speed (rendering + physics + inference + learning), Galactic achieves over 108,000 SPS, which 88x faster than Habitat 2.0 (1243 SPS). These massive speed-ups not only drastically cut the wall-clock training time of existing experiments, but also unlock an unprecedented scale of new experiments. First, Galactic can train a mobile pick skill to >80% accuracy in under 16 minutes, a 100x speedup compared to the over 24 hours it takes to train the same skill in Habitat 2.0. Second, we use Galactic to perform the largest-scale experiment to date for rearrangement using 5B steps of experience in 46 hours, which is equivalent to 20 years of robot experience. This scaling results in a single neural network composed of task-agnostic components achieving 85% success in GeometricGoal rearrangement, compared to 0% success reported in Habitat 2.0 for the same approach. The code is available at github.com/facebookresearch/galactic.


136
Affordances From Human Videos as a Versatile Representation for Robotics

Shikhar Bahl · Russell Mendonca · Lili Chen · Unnat Jain · Deepak Pathak

Building a robot that can understand and learn to interact by watching humans has inspired several vision problems. However, despite some successful results on static datasets, it remains unclear how current models can be used on a robot directly. In this paper, we aim to bridge this gap by leveraging videos of human interactions in an environment centric manner. Utilizing internet videos of human behavior, we train a visual affordance model that estimates where and how in the scene a human is likely to interact. The structure of these behavioral affordances directly enables the robot to perform many complex tasks. We show how to seamlessly integrate our affordance model with four robot learning paradigms including offline imitation learning, exploration, goal-conditioned learning, and action parameterization for reinforcement learning. We show the efficacy of our approach, which we call Vision-Robotics Bridge (VRB) across 4 real world environments, over 10 different tasks, and 2 robotic platforms operating in the wild.


137
Indiscernible Object Counting in Underwater Scenes

Guolei Sun · Zhaochong An · Yun Liu · Ce Liu · Christos Sakaridis · Deng-Ping Fan · Luc Van Gool

Recently, indiscernible scene understanding has attracted a lot of attention in the vision community. We further advance the frontier of this field by systematically studying a new challenge named indiscernible object counting (IOC), the goal of which is to count objects that are blended with respect to their surroundings. Due to a lack of appropriate IOC datasets, we present a large-scale dataset IOCfish5K which contains a total of 5,637 high-resolution images and 659,024 annotated center points. Our dataset consists of a large number of indiscernible objects (mainly fish) in underwater scenes, making the annotation process all the more challenging. IOCfish5K is superior to existing datasets with indiscernible scenes because of its larger scale, higher image resolutions, more annotations, and denser scenes. All these aspects make it the most challenging dataset for IOC so far, supporting progress in this area. For benchmarking purposes, we select 14 mainstream methods for object counting and carefully evaluate them on IOCfish5K. Furthermore, we propose IOCFormer, a new strong baseline that combines density and regression branches in a unified framework and can effectively tackle object counting under concealed scenes. Experiments show that IOCFormer achieves state-of-the-art scores on IOCfish5K.


138
Tracking Through Containers and Occluders in the Wild

Basile Van Hoorick · Pavel Tokmakov · Simon Stent · Jie Li · Carl Vondrick

Tracking objects with persistence in cluttered and dynamic environments remains a difficult challenge for computer vision systems. In this paper, we introduce TCOW, a new benchmark and model for visual tracking through heavy occlusion and containment. We set up a task where the goal is to, given a video sequence, segment both the projected extent of the target object, as well as the surrounding container or occluder whenever one exists. To study this task, we create a mixture of synthetic and annotated real datasets to support both supervised learning and structured evaluation of model performance under various forms of task variation, such as moving or nested containment. We evaluate two recent transformer-based video models and find that while they can be surprisingly capable of tracking targets under certain settings of task variation, there remains a considerable performance gap before we can claim a tracking model to have acquired a true notion of object permanence.


139
Simple Cues Lead to a Strong Multi-Object Tracker

Jenny Seidenschwarz · Guillem Brasó · Víctor Castro Serrano · Ismail Elezi · Laura Leal-Taixé

For a long time, the most common paradigm in MultiObject Tracking was tracking-by-detection (TbD), where objects are first detected and then associated over video frames. For association, most models resourced to motion and appearance cues, e.g., re-identification networks. Recent approaches based on attention propose to learn the cues in a data-driven manner, showing impressive results. In this paper, we ask ourselves whether simple good old TbD methods are also capable of achieving the performance of end-to-end models. To this end, we propose two key ingredients that allow a standard re-identification network to excel at appearance-based tracking. We extensively analyse its failure cases, and show that a combination of our appearance features with a simple motion model leads to strong tracking results. Our tracker generalizes to four public datasets, namely MOT17, MOT20, BDD100k, and DanceTrack, achieving state-ofthe-art performance. https://github.com/dvl-tum/GHOST


140
An In-Depth Exploration of Person Re-Identification and Gait Recognition in Cloth-Changing Conditions

Weijia Li · Saihui Hou · Chunjie Zhang · Chunshui Cao · Xu Liu · Yongzhen Huang · Yao Zhao

The target of person re-identification (ReID) and gait recognition is consistent, that is to match the target pedestrian under surveillance cameras. For the cloth-changing problem, video-based ReID is rarely studied due to the lack of a suitable cloth-changing benchmark, and gait recognition is often researched under controlled conditions. To tackle this problem, we propose a Cloth-Changing benchmark for Person re-identification and Gait recognition (CCPG). It is a cloth-changing dataset, and there are several highlights in CCPG, (1) it provides 200 identities and over 16K sequences are captured indoors and outdoors, (2) each identity has seven different cloth-changing statuses, which is hardly seen in previous datasets, (3) RGB and silhouettes version data are both available for research purposes. Moreover, aiming to investigate the cloth-changing problem systematically, comprehensive experiments are conducted on video-based ReID and gait recognition methods. The experimental results demonstrate the superiority of ReID and gait recognition separately in different cloth-changing conditions and suggest that gait recognition is a potential solution for addressing the cloth-changing problem. Our dataset will be available at https://github.com/BNU-IVC/CCPG.


141
SelfME: Self-Supervised Motion Learning for Micro-Expression Recognition

Xinqi Fan · Xueli Chen · Mingjie Jiang · Ali Raza Shahid · Hong Yan

Facial micro-expressions (MEs) refer to brief spontaneous facial movements that can reveal a person’s genuine emotion. They are valuable in lie detection, criminal analysis, and other areas. While deep learning-based ME recognition (MER) methods achieved impressive success, these methods typically require pre-processing using conventional optical flow-based methods to extract facial motions as inputs. To overcome this limitation, we proposed a novel MER framework using self-supervised learning to extract facial motion for ME (SelfME). To the best of our knowledge, this is the first work using an automatically self-learned motion technique for MER. However, the self-supervised motion learning method might suffer from ignoring symmetrical facial actions on the left and right sides of faces when extracting fine features. To address this issue, we developed a symmetric contrastive vision transformer (SCViT) to constrain the learning of similar facial action features for the left and right parts of faces. Experiments were conducted on two benchmark datasets showing that our method achieved state-of-the-art performance, and ablation studies demonstrated the effectiveness of our method.


142
LipFormer: High-Fidelity and Generalizable Talking Face Generation With a Pre-Learned Facial Codebook

Jiayu Wang · Kang Zhao · Shiwei Zhang · Yingya Zhang · Yujun Shen · Deli Zhao · Jingren Zhou

Generating a talking face video from the input audio sequence is a practical yet challenging task. Most existing methods either fail to capture fine facial details or need to train a specific model for each identity. We argue that a codebook pre-learned on high-quality face images can serve as a useful prior that facilitates high-fidelity and generalizable talking head synthesis. Thanks to the strong capability of the codebook in representing face textures, we simplify the talking face generation task as finding proper lip-codes to characterize the variation of lips during a portrait talking. To this end, we propose LipFormer, a transformer-based framework, to model the audio-visual coherence and predict the lip-codes sequence based on the input audio features. We further introduce an adaptive face warping module, which helps warp the reference face to the target pose in the feature space, to alleviate the difficulty of lip-code prediction under different poses. By this means, LipFormer can make better use of the pre-learned priors in images and is robust to posture change. Extensive experiments show that LipFormer can produce more realistic talking face videos compared to previous methods and faithfully generalize to unseen identities.


143
Real-Time Multi-Person Eyeblink Detection in the Wild for Untrimmed Video

Wenzheng Zeng · Yang Xiao · Sicheng Wei · Jinfang Gan · Xintao Zhang · Zhiguo Cao · Zhiwen Fang · Joey Tianyi Zhou

Real-time eyeblink detection in the wild can widely serve for fatigue detection, face anti-spoofing, emotion analysis, etc. The existing research efforts generally focus on single-person cases towards trimmed video. However, multi-person scenario within untrimmed videos is also important for practical applications, which has not been well concerned yet. To address this, we shed light on this research field for the first time with essential contributions on dataset, theory, and practices. In particular, a large-scale dataset termed MPEblink that involves 686 untrimmed videos with 8748 eyeblink events is proposed under multi-person conditions. The samples are captured from unconstrained films to reveal “in the wild” characteristics. Meanwhile, a real-time multi-person eyeblink detection method is also proposed. Being different from the existing counterparts, our proposition runs in a one-stage spatio-temporal way with an end-to-end learning capacity. Specifically, it simultaneously addresses the sub-tasks of face detection, face tracking, and human instance-level eyeblink detection. This paradigm holds 2 main advantages: (1) eyeblink features can be facilitated via the face’s global context (e.g., head pose and illumination condition) with joint optimization and interaction, and (2) addressing these sub-tasks in parallel instead of sequential manner can save time remarkably to meet the real-time running requirement. Experiments on MPEblink verify the essential challenges of real-time multi-person eyeblink detection in the wild for untrimmed video. Our method also outperforms existing approaches by large margins and with a high inference speed.


144
Skinned Motion Retargeting With Residual Perception of Motion Semantics & Geometry

Jiaxu Zhang · Junwu Weng · Di Kang · Fang Zhao · Shaoli Huang · Xuefei Zhe · Linchao Bao · Ying Shan · Jue Wang · Zhigang Tu

A good motion retargeting cannot be reached without reasonable consideration of source-target differences on both the skeleton and shape geometry levels. In this work, we propose a novel Residual RETargeting network (R2ET) structure, which relies on two neural modification modules, to adjust the source motions to fit the target skeletons and shapes progressively. In particular, a skeleton-aware module is introduced to preserve the source motion semantics. A shape-aware module is designed to perceive the geometries of target characters to reduce interpenetration and contact-missing. Driven by our explored distance-based losses that explicitly model the motion semantics and geometry, these two modules can learn residual motion modifications on the source motion to generate plausible retargeted motion in a single inference without post-processing. To balance these two modifications, we further present a balancing gate to conduct linear interpolation between them. Extensive experiments on the public dataset Mixamo demonstrate that our R2ET achieves the state-of-the-art performance, and provides a good balance between the preservation of motion semantics as well as the attenuation of interpenetration and contact-missing. Code is available at https://github.com/Kebii/R2ET.


145
MoDi: Unconditional Motion Synthesis From Diverse Data

Sigal Raab · Inbal Leibovitch · Peizhuo Li · Kfir Aberman · Olga Sorkine-Hornung · Daniel Cohen-Or

The emergence of neural networks has revolutionized the field of motion synthesis. Yet, learning to unconditionally synthesize motions from a given distribution remains challenging, especially when the motions are highly diverse. In this work, we present MoDi -- a generative model trained in an unsupervised setting from an extremely diverse, unstructured and unlabeled dataset. During inference, MoDi can synthesize high-quality, diverse motions. Despite the lack of any structure in the dataset, our model yields a well-behaved and highly structured latent space, which can be semantically clustered, constituting a strong motion prior that facilitates various applications including semantic editing and crowd animation. In addition, we present an encoder that inverts real motions into MoDi’s natural motion manifold, issuing solutions to various ill-posed challenges such as completion from prefix and spatial editing. Our qualitative and quantitative experiments achieve state-of-the-art results that outperform recent SOTA techniques. Code and trained models are available at https://sigal-raab.github.io/MoDi.


146
Recurrent Vision Transformers for Object Detection With Event Cameras

Mathias Gehrig · Davide Scaramuzza

We present Recurrent Vision Transformers (RVTs), a novel backbone for object detection with event cameras. Event cameras provide visual information with sub-millisecond latency at a high-dynamic range and with strong robustness against motion blur. These unique properties offer great potential for low-latency object detection and tracking in time-critical scenarios. Prior work in event-based vision has achieved outstanding detection performance but at the cost of substantial inference time, typically beyond 40 milliseconds. By revisiting the high-level design of recurrent vision backbones, we reduce inference time by a factor of 6 while retaining similar performance. To achieve this, we explore a multi-stage design that utilizes three key concepts in each stage: First, a convolutional prior that can be regarded as a conditional positional embedding. Second, local- and dilated global self-attention for spatial feature interaction. Third, recurrent temporal feature aggregation to minimize latency while retaining temporal information. RVTs can be trained from scratch to reach state-of-the-art performance on event-based object detection - achieving an mAP of 47.2% on the Gen1 automotive dataset. At the same time, RVTs offer fast inference (<12 ms on a T4 GPU) and favorable parameter efficiency (5 times fewer than prior art). Our study brings new insights into effective design choices that can be fruitful for research beyond event-based vision.


147
Continuous Intermediate Token Learning With Implicit Motion Manifold for Keyframe Based Motion Interpolation

Clinton A. Mo · Kun Hu · Chengjiang Long · Zhiyong Wang

Deriving sophisticated 3D motions from sparse keyframes is a particularly challenging problem, due to continuity and exceptionally skeletal precision. The action features are often derivable accurately from the full series of keyframes, and thus, leveraging the global context with transformers has been a promising data-driven embedding approach. However, existing methods are often with inputs of interpolated intermediate frame for continuity using basic interpolation methods with keyframes, which result in a trivial local minimum during training. In this paper, we propose a novel framework to formulate latent motion manifolds with keyframe-based constraints, from which the continuous nature of intermediate token representations is considered. Particularly, our proposed framework consists of two stages for identifying a latent motion subspace, i.e., a keyframe encoding stage and an intermediate token generation stage, and a subsequent motion synthesis stage to extrapolate and compose motion data from manifolds. Through our extensive experiments conducted on both the LaFAN1 and CMU Mocap datasets, our proposed method demonstrates both superior interpolation accuracy and high visual similarity to ground truth motions.


148
EvShutter: Transforming Events for Unconstrained Rolling Shutter Correction

Julius Erbach · Stepan Tulyakov · Patricia Vitoria · Alfredo Bochicchio · Yuanyou Li

Widely used Rolling Shutter (RS) CMOS sensors capture high resolution images at the expense of introducing distortions and artifacts in the presence of motion. In such situations, RS distortion correction algorithms are critical. Recent methods rely on a constant velocity assumption and require multiple frames to predict the dense displacement field. In this work, we introduce a new method, called Eventful Shutter (EvShutter), that corrects RS artifacts using a single RGB image and event information with high temporal resolution. The method firstly removes blur using a novel flow-based deblurring module and then compensates RS using a double encoder hourglass network. In contrast to previous methods, it does not rely on a constant velocity assumption and uses a simple architecture thanks to an event transformation dedicated to RS, called Filter and Flip (FnF), that transforms input events to encode only the changes between GS and RS images. To evaluate the proposed method and facilitate future research, we collect the first dataset with real events and high-quality RS images with optional blur, called RS-ERGB. We generate the RS images from GS images using a newly proposed simulator based on adaptive interpolation. The simulator permits the use of inexpensive cameras with long exposure to capture high-quality GS images. We show that on this realistic dataset the proposed method outperforms the state-of-the-art image- and event-based methods by 9.16 dB and 0.75 dB respectively in terms of PSNR and an improvement of 23% and 21% in LPIPS.


149
Multi Domain Learning for Motion Magnification

Jasdeep Singh · Subrahmanyam Murala · G. Sankara Raju Kosuru

Video motion magnification makes subtle invisible motions visible, such as small chest movements while breathing, subtle vibrations in the moving objects etc. But small motions are prone to noise, illumination changes, large motions, etc. making the task difficult. Most state-of-the-art methods use hand-crafted concepts which result in small magnification, ringing artifacts etc. The deep learning based approach has higher magnification but is prone to severe artifacts in some scenarios. We propose a new phase based deep network for video motion magnification that operates in both domains (frequency and spatial) to address this issue. It generates motion magnification from frequency domain phase fluctuations and then improves its quality in the spatial domain. The proposed models are lightweight networks with fewer parameters (~ 0.11M and ~ 0.05M). Further, the proposed networks performance is compared to the SOTA approaches and evaluated on real-world and synthetic videos. Finally, an ablation study is also conducted to show the impact of different parts of the network.


150
Learning Event Guided High Dynamic Range Video Reconstruction

Yixin Yang · Jin Han · Jinxiu Liang · Imari Sato · Boxin Shi

Limited by the trade-off between frame rate and exposure time when capturing moving scenes with conventional cameras, frame based HDR video reconstruction suffers from scene-dependent exposure ratio balancing and ghosting artifacts. Event cameras provide an alternative visual representation with a much higher dynamic range and temporal resolution free from the above issues, which could be an effective guidance for HDR imaging from LDR videos. In this paper, we propose a multimodal learning framework for event guided HDR video reconstruction. In order to better leverage the knowledge of the same scene from the two modalities of visual signals, a multimodal representation alignment strategy to learn a shared latent space and a fusion module tailored to complementing two types of signals for different dynamic ranges in different regions are proposed. Temporal correlations are utilized recurrently to suppress the flickering effects in the reconstructed HDR video. The proposed HDRev-Net demonstrates state-of-the-art performance quantitatively and qualitatively for both synthetic and real-world data.


151
Joint Video Multi-Frame Interpolation and Deblurring Under Unknown Exposure Time

Wei Shang · Dongwei Ren · Yi Yang · Hongzhi Zhang · Kede Ma · Wangmeng Zuo

Natural videos captured by consumer cameras often suffer from low framerate and motion blur due to the combination of dynamic scene complexity, lens and sensor imperfection, and less than ideal exposure setting. As a result, computational methods that jointly perform video frame interpolation and deblurring begin to emerge with the unrealistic assumption that the exposure time is known and fixed. In this work, we aim ambitiously for a more realistic and challenging task - joint video multi-frame interpolation and deblurring under unknown exposure time. Toward this goal, we first adopt a variant of supervised contrastive learning to construct an exposure-aware representation from input blurred frames. We then train two U-Nets for intra-motion and inter-motion analysis, respectively, adapting to the learned exposure representation via gain tuning. We finally build our video reconstruction network upon the exposure and motion representation by progressive exposure-adaptive convolution and motion refinement. Extensive experiments on both simulated and real-world datasets show that our optimized method achieves notable performance gains over the state-of-the-art on the joint video ×8 interpolation and deblurring task. Moreover, on the seemingly implausible ×16 interpolation task, our method outperforms existing methods by more than 1.5 dB in terms of PSNR.


152
FeatER: An Efficient Network for Human Reconstruction via Feature Map-Based TransformER

Ce Zheng · Matias Mendieta · Taojiannan Yang · Guo-Jun Qi · Chen Chen

Recently, vision transformers have shown great success in a set of human reconstruction tasks such as 2D human pose estimation (2D HPE), 3D human pose estimation (3D HPE), and human mesh reconstruction (HMR) tasks. In these tasks, feature map representations of the human structural information are often extracted first from the image by a CNN (such as HRNet), and then further processed by transformer to predict the heatmaps (encodes each joint’s location into a feature map with a Gaussian distribution) for HPE or HMR. However, existing transformer architectures are not able to process these feature map inputs directly, forcing an unnatural flattening of the location-sensitive human structural information. Furthermore, much of the performance benefit in recent HPE and HMR methods has come at the cost of ever-increasing computation and memory needs. Therefore, to simultaneously address these problems, we propose FeatER, a novel transformer design which preserves the inherent structure of feature map representations when modeling attention while reducing the memory and computational costs. Taking advantage of FeatER, we build an efficient network for a set of human reconstruction tasks including 2D HPE, 3D HPE, and HMR. A feature map reconstruction module is applied to improve the performance of the estimated human pose and mesh. Extensive experiments demonstrate the effectiveness of FeatER on various human pose and mesh datasets. For instance, FeatER outperforms the SOTA method MeshGraphormer by requiring 5% of Params (total parameters) and 16% of MACs (the Multiply-Accumulate Operations) on Human3.6M and 3DPW datasets. Code will be publicly available.


153
MetaFusion: Infrared and Visible Image Fusion via Meta-Feature Embedding From Object Detection

Wenda Zhao · Shigeng Xie · Fan Zhao · You He · Huchuan Lu

Fusing infrared and visible images can provide more texture details for subsequent object detection task. Conversely, detection task furnishes object semantic information to improve the infrared and visible image fusion. Thus, a joint fusion and detection learning to use their mutual promotion is attracting more attention. However, the feature gap between these two different-level tasks hinders the progress. Addressing this issue, this paper proposes an infrared and visible image fusion via meta-feature embedding from object detection. The core idea is that meta-feature embedding model is designed to generate object semantic features according to fusion network ability, and thus the semantic features are naturally compatible with fusion features. It is optimized by simulating a meta learning. Moreover, we further implement a mutual promotion learning between fusion and detection tasks to improve their performances. Comprehensive experiments on three public datasets demonstrate the effectiveness of our method. Code and model are available at: https://github.com/wdzhao123/MetaFusion.


154
Joint HDR Denoising and Fusion: A Real-World Mobile HDR Image Dataset

Shuaizheng Liu · Xindong Zhang · Lingchen Sun · Zhetong Liang · Hui Zeng · Lei Zhang

Mobile phones have become a ubiquitous and indispensable photographing device in our daily life, while the small aperture and sensor size make mobile phones more susceptible to noise and over-saturation, resulting in low dynamic range (LDR) and low image quality. It is thus crucial to develop high dynamic range (HDR) imaging techniques for mobile phones. Unfortunately, the existing HDR image datasets are mostly constructed by DSLR cameras in daytime, limiting their applicability to the study of HDR imaging for mobile phones. In this work, we develop, for the first time to our best knowledge, an HDR image dataset by using mobile phone cameras, namely Mobile-HDR dataset. Specifically, we utilize three mobile phone cameras to collect paired LDR-HDR images in the raw image domain, covering both daytime and nighttime scenes with different noise levels. We then propose a transformer based model with a pyramid cross-attention alignment module to aggregate highly correlated features from different exposure frames to perform joint HDR denoising and fusion. Experiments validate the advantages of our dataset and our method on mobile HDR imaging. Dataset and codes are available at https://github.com/shuaizhengliu/Joint-HDRDN.


155
Visibility Constrained Wide-Band Illumination Spectrum Design for Seeing-in-the-Dark

Muyao Niu · Zhuoxiao Li · Zhihang Zhong · Yinqiang Zheng

Seeing-in-the-dark is one of the most important and challenging computer vision tasks due to its wide applications and extreme complexities of in-the-wild scenarios. Existing arts can be mainly divided into two threads: 1) RGB-dependent methods restore information using degraded RGB inputs only (e.g., low-light enhancement), 2) RGB-independent methods translate images captured under auxiliary near-infrared (NIR) illuminants into RGB domain (e.g., NIR2RGB translation). The latter is very attractive since it works in complete darkness and the illuminants are visually friendly to naked eyes, but tends to be unstable due to its intrinsic ambiguities. In this paper, we try to robustify NIR2RGB translation by designing the optimal spectrum of auxiliary illumination in the wide-band VIS-NIR range, while keeping visual friendliness. Our core idea is to quantify the visibility constraint implied by the human vision system and incorporate it into the design pipeline. By modeling the formation process of images in the VIS-NIR range, the optimal multiplexing of a wide range of LEDs is automatically designed in a fully differentiable manner, within the feasible region defined by the visibility constraint. We also collect a substantially expanded VIS-NIR hyperspectral image dataset for experiments by using a customized 50-band filter wheel. Experimental results show that the task can be significantly improved by using the optimized wide-band illumination than using NIR only. Codes Available: https://github.com/MyNiuuu/VCSD.


156
Self-Supervised Blind Motion Deblurring With Deep Expectation Maximization

Ji Li · Weixi Wang · Yuesong Nan · Hui Ji

When taking a picture, any camera shake during the shutter time can result in a blurred image. Recovering a sharp image from the one blurred by camera shake is a challenging yet important problem. Most existing deep learning methods use supervised learning to train a deep neural network (DNN) on a dataset of many pairs of blurred/latent images. In contrast, this paper presents a dataset-free deep learning method for removing uniform and non-uniform blur effects from images of static scenes. Our method involves a DNN-based re-parametrization of the latent image, and we propose a Monte Carlo Expectation Maximization (MCEM) approach to train the DNN without requiring any latent images. The Monte Carlo simulation is implemented via Langevin dynamics. Experiments showed that the proposed method outperforms existing methods significantly in removing motion blur from images of static scenes.


157
Structure Aggregation for Cross-Spectral Stereo Image Guided Denoising

Zehua Sheng · Zhu Yu · Xiongwei Liu · Si-Yuan Cao · Yuqi Liu · Hui-Liang Shen · Huaqi Zhang

To obtain clean images with salient structures from noisy observations, a growing trend in current denoising studies is to seek the help of additional guidance images with high signal-to-noise ratios, which are often acquired in different spectral bands such as near infrared. Although previous guided denoising methods basically require the input images to be well-aligned, a more common way to capture the paired noisy target and guidance images is to exploit a stereo camera system. However, current studies on cross-spectral stereo matching cannot fully guarantee the pixel-level registration accuracy, and rarely consider the case of noise contamination. In this work, for the first time, we propose a guided denoising framework for cross-spectral stereo images. Instead of aligning the input images via conventional stereo matching, we aggregate structures from the guidance image to estimate a clean structure map for the noisy target image, which is then used to regress the final denoising result with a spatially variant linear representation model. Based on this, we design a neural network, called as SANet, to complete the entire guided denoising process. Experimental results show that, our SANet can effectively transfer structures from an unaligned guidance image to the restoration result, and outperforms state-of-the-art denoisers on various stereo image datasets. Besides, our structure aggregation strategy also shows its potential to handle other unaligned guided restoration tasks such as super-resolution and deblurring. The source code is available at https://github.com/lustrouselixir/SANet.


158
Rawgment: Noise-Accounted RAW Augmentation Enables Recognition in a Wide Variety of Environments

Masakazu Yoshimura · Junji Otsuka · Atsushi Irie · Takeshi Ohashi

Image recognition models that work in challenging environments (e.g., extremely dark, blurry, or high dynamic range conditions) must be useful. However, creating training datasets for such environments is expensive and hard due to the difficulties of data collection and annotation. It is desirable if we could get a robust model without the need for hard-to-obtain datasets. One simple approach is to apply data augmentation such as color jitter and blur to standard RGB (sRGB) images in simple scenes. Unfortunately, this approach struggles to yield realistic images in terms of pixel intensity and noise distribution due to not considering the non-linearity of Image Signal Processors (ISPs) and noise characteristics of image sensors. Instead, we propose a noise-accounted RAW image augmentation method. In essence, color jitter and blur augmentation are applied to a RAW image before applying non-linear ISP, resulting in realistic intensity. Furthermore, we introduce a noise amount alignment method that calibrates the domain gap in the noise property caused by the augmentation. We show that our proposed noise-accounted RAW augmentation method doubles the image recognition accuracy in challenging environments only with simple training data.


159
Zero-Shot Noise2Noise: Efficient Image Denoising Without Any Data

Youssef Mansour · Reinhard Heckel

Recently, self-supervised neural networks have shown excellent image denoising performance. However, current dataset free methods are either computationally expensive, require a noise model, or have inadequate image quality. In this work we show that a simple 2-layer network, without any training data or knowledge of the noise distribution, can enable high-quality image denoising at low computational cost. Our approach is motivated by Noise2Noise and Neighbor2Neighbor and works well for denoising pixel-wise independent noise. Our experiments on artificial, real-world camera, and microscope noise show that our method termed ZS-N2N (Zero Shot Noise2Noise) often outperforms existing dataset-free methods at a reduced cost, making it suitable for use cases with scarce data availability and limited compute.


160
Real-Time Controllable Denoising for Image and Video

Zhaoyang Zhang · Yitong Jiang · Wenqi Shao · Xiaogang Wang · Ping Luo · Kaimo Lin · Jinwei Gu

Controllable image denoising aims to generate clean samples with human perceptual priors and balance sharpness and smoothness. In traditional filter-based denoising methods, this can be easily achieved by adjusting the filtering strength. However, for NN (Neural Network)-based models, adjusting the final denoising strength requires performing network inference each time, making it almost impossible for real-time user interaction. In this paper, we introduce Real-time Controllable Denoising (RCD), the first deep image and video denoising pipeline that provides a fully controllable user interface to edit arbitrary denoising levels in real-time with only one-time network inference. Unlike existing controllable denoising methods that require multiple denoisers and training stages, RCD replaces the last output layer (which usually outputs a single noise map) of an existing CNN-based model with a lightweight module that outputs multiple noise maps. We propose a novel Noise Decorrelation process to enforce the orthogonality of the noise feature maps, allowing arbitrary noise level control through noise map interpolation. This process is network-free and does not require network inference. Our experiments show that RCD can enable real-time editable image and video denoising for various existing heavy-weight models without sacrificing their original performance.


161
Probability-Based Global Cross-Modal Upsampling for Pansharpening

Zeyu Zhu · Xiangyong Cao · Man Zhou · Junhao Huang · Deyu Meng

Pansharpening is an essential preprocessing step for remote sensing image processing. Although deep learning (DL) approaches performed well on this task, current upsampling methods used in these approaches only utilize the local information of each pixel in the low-resolution multispectral (LRMS) image while neglecting to exploit its global information as well as the cross-modal information of the guiding panchromatic (PAN) image, which limits their performance improvement. To address this issue, this paper develops a novel probability-based global cross-modal upsampling (PGCU) method for pan-sharpening. Precisely, we first formulate the PGCU method from a probabilistic perspective and then design an efficient network module to implement it by fully utilizing the information mentioned above while simultaneously considering the channel specificity. The PGCU module consists of three blocks, i.e., information extraction (IE), distribution and expectation estimation (DEE), and fine adjustment (FA). Extensive experiments verify the superiority of the PGCU method compared with other popular upsampling methods. Additionally, experiments also show that the PGCU module can help improve the performance of existing SOTA deep learning pansharpening methods. The codes are available at https://github.com/Zeyu-Zhu/PGCU.


162
ShadowDiffusion: When Degradation Prior Meets Diffusion Model for Shadow Removal

Lanqing Guo · Chong Wang · Wenhan Yang · Siyu Huang · Yufei Wang · Hanspeter Pfister · Bihan Wen

Recent deep learning methods have achieved promising results in image shadow removal. However, their restored images still suffer from unsatisfactory boundary artifacts, due to the lack of degradation prior and the deficiency in modeling capacity. Our work addresses these issues by proposing a unified diffusion framework that integrates both the image and degradation priors for highly effective shadow removal. In detail, we first propose a shadow degradation model, which inspires us to build a novel unrolling diffusion model, dubbed ShandowDiffusion. It remarkably improves the model’s capacity in shadow removal via progressively refining the desired output with both degradation prior and diffusive generative prior, which by nature can serve as a new strong baseline for image restoration. Furthermore, ShadowDiffusion progressively refines the estimated shadow mask as an auxiliary task of the diffusion generator, which leads to more accurate and robust shadow-free image generation. We conduct extensive experiments on three popular public datasets, including ISTD, ISTD+, and SRD, to validate our method’s effectiveness. Compared to the state-of-the-art methods, our model achieves a significant improvement in terms of PSNR, increasing from 31.69dB to 34.73dB over SRD dataset.


163
Visual Recognition-Driven Image Restoration for Multiple Degradation With Intrinsic Semantics Recovery

Zizheng Yang · Jie Huang · Jiahao Chang · Man Zhou · Hu Yu · Jinghao Zhang · Feng Zhao

Deep image recognition models suffer a significant performance drop when applied to low-quality images since they are trained on high-quality images. Although many studies have investigated to solve the issue through image restoration or domain adaptation, the former focuses on visual quality rather than recognition quality, while the latter requires semantic annotations for task-specific training. In this paper, to address more practical scenarios, we propose a Visual Recognition-Driven Image Restoration network for multiple degradation, dubbed VRD-IR, to recover high-quality images from various unknown corruption types from the perspective of visual recognition within one model. Concretely, we harmonize the semantic representations of diverse degraded images into a unified space in a dynamic manner, and then optimize them towards intrinsic semantics recovery. Moreover, a prior-ascribing optimization strategy is introduced to encourage VRD-IR to couple with various downstream recognition tasks better. Our VRD-IR is corruption- and recognition-agnostic, and can be inserted into various recognition tasks directly as an image enhancement module. Extensive experiments on multiple image distortions demonstrate that our VRD-IR surpasses existing image restoration methods and show superior performance on diverse high-level tasks, including classification, detection, and person re-identification.


164
Blind Image Quality Assessment via Vision-Language Correspondence: A Multitask Learning Perspective

Weixia Zhang · Guangtao Zhai · Ying Wei · Xiaokang Yang · Kede Ma

We aim at advancing blind image quality assessment (BIQA), which predicts the human perception of image quality without any reference information. We develop a general and automated multitask learning scheme for BIQA to exploit auxiliary knowledge from other tasks, in a way that the model parameter sharing and the loss weighting are determined automatically. Specifically, we first describe all candidate label combinations (from multiple tasks) using a textual template, and compute the joint probability from the cosine similarities of the visual-textual embeddings. Predictions of each task can be inferred from the joint distribution, and optimized by carefully designed loss functions. Through comprehensive experiments on learning three tasks - BIQA, scene classification, and distortion type identification, we verify that the proposed BIQA method 1) benefits from the scene classification and distortion type identification tasks and outperforms the state-of-the-art on multiple IQA datasets, 2) is more robust in the group maximum differentiation competition, and 3) realigns the quality annotations from different IQA datasets more effectively. The source code is available at https://github.com/zwx8981/LIQE.


165
Human Guided Ground-Truth Generation for Realistic Image Super-Resolution

Du Chen · Jie Liang · Xindong Zhang · Ming Liu · Hui Zeng · Lei Zhang

How to generate the ground-truth (GT) image is a critical issue for training realistic image super-resolution (Real-ISR) models. Existing methods mostly take a set of high-resolution (HR) images as GTs and apply various degradations to simulate their low-resolution (LR) counterparts. Though great progress has been achieved, such an LR-HR pair generation scheme has several limitations. First, the perceptual quality of HR images may not be high enough, limiting the quality of Real-ISR outputs. Second, existing schemes do not consider much human perception in GT generation, and the trained models tend to produce over-smoothed results or unpleasant artifacts. With the above considerations, we propose a human guided GT generation scheme. We first elaborately train multiple image enhancement models to improve the perceptual quality of HR images, and enable one LR image having multiple HR counterparts. Human subjects are then involved to annotate the high quality regions among the enhanced HR images as GTs, and label the regions with unpleasant artifacts as negative samples. A human guided GT image dataset with both positive and negative samples is then constructed, and a loss function is proposed to train the Real-ISR models. Experiments show that the Real-ISR models trained on our dataset can produce perceptually more realistic results with less artifacts. Dataset and codes can be found at https://github.com/ChrisDud0257/HGGT.


166
Real-Time 6K Image Rescaling With Rate-Distortion Optimization

Chenyang Qi · Xin Yang · Ka Leong Cheng · Ying-Cong Chen · Qifeng Chen

The task of image rescaling aims at embedding an high-resolution (HR) image into a low-resolution (LR) one that can contain embedded information for HR image reconstruction. Existing image rescaling methods do not optimize the LR image file size and recent flow-based rescaling methods are not real-time yet for HR image reconstruction (e.g., 6K). To address these two challenges, we propose a novel framework (HyperThumbnail) for real-time 6K rate-distortion-aware image rescaling. Our HyperThumbnail first embeds an HR image into a JPEG LR image (thumbnail) by an encoder with our proposed learnable JPEG quantization module, which optimizes the file size of the embedding LR JPEG image. Then, an efficient decoder reconstructs a high-fidelity HR (6K) image from the LR one in real time. Extensive experiments demonstrate that our framework outperforms previous image rescaling baselines in both rate-distortion performance and is much faster than prior work in HR image reconstruction speed.


167
Equivalent Transformation and Dual Stream Network Construction for Mobile Image Super-Resolution

Jiahao Chao · Zhou Zhou · Hongfan Gao · Jiali Gong · Zhengfeng Yang · Zhenbing Zeng · Lydia Dehbi

In recent years, there has been an increasing demand for real-time super-resolution networks on mobile devices. To address this issue, many lightweight super-resolution models have been proposed. However, these models still contain time-consuming components that increase inference latency, limiting their real-world applications on mobile devices. In this paper, we propose a novel model for singleimage super-resolution based on Equivalent Transformation and Dual Stream network construction (ETDS). ET method is proposed to transform time-consuming operators into time-friendly ones such as convolution and ReLU on mobile devices. Then, a dual stream network is designed to alleviate redundant parameters yielded from ET and enhance the feature extraction ability. Taking full advantage of the advance of ET and the dual stream network structure, we develop the efficient SR model ETDS for mobile devices. The experimental results demonstrate that our ETDS achieves superior inference speed and reconstruction quality compared to prior lightweight SR methods on mobile devices. The code is available at https://github.com/ECNUSR/ETDS.


168
Ultrahigh Resolution Image/Video Matting With Spatio-Temporal Sparsity

Yanan Sun · Chi-Keung Tang · Yu-Wing Tai

Commodity ultra-high definition (UHD) displays are becoming more affordable which demand imaging in ultra high resolution (UHR). This paper proposes SparseMat, a computationally efficient approach for UHR image/video matting. Note that it is infeasible to directly process UHR images at full resolution in one shot using existing matting algorithms without running out of memory on consumer-level computational platforms, e.g., Nvidia 1080Ti with 11G memory, while patch-based approaches can introduce unsightly artifacts due to patch partitioning. Instead, our method resorts to spatial and temporal sparsity for solving general UHR matting. During processing videos, huge computation redundancy can be reduced through the rational use of spatial and temporal sparsity. In this paper, we show how to effectively estimate spatio-temporal sparsity, which serves as a gate to activate input pixels for the matting model. Under the guidance of such sparsity, our method discards patch-based inference in lieu of memory-efficient and full-resolution matte refinement. Extensive experiments demonstrate that SparseMat can effectively and efficiently generate high-quality alpha matte for UHR images and videos in one shot.


169
Comprehensive and Delicate: An Efficient Transformer for Image Restoration

Haiyu Zhao · Yuanbiao Gou · Boyun Li · Dezhong Peng · Jiancheng Lv · Xi Peng

Vision Transformers have shown promising performance in image restoration, which usually conduct window- or channel-based attention to avoid intensive computations. Although the promising performance has been achieved, they go against the biggest success factor of Transformers to a certain extent by capturing the local instead of global dependency among pixels. In this paper, we propose a novel efficient image restoration Transformer that first captures the superpixel-wise global dependency, and then transfers it into each pixel. Such a coarse-to-fine paradigm is implemented through two neural blocks, i.e., condensed attention neural block (CA) and dual adaptive neural block (DA). In brief, CA employs feature aggregation, attention computation, and feature recovery to efficiently capture the global dependency at the superpixel level. To embrace the pixel-wise global dependency, DA takes a novel dual-way structure to adaptively encapsulate the globality from superpixels into pixels. Thanks to the two neural blocks, our method achieves comparable performance while taking only ~6% FLOPs compared with SwinIR.


170
Highlight
PHA: Patch-Wise High-Frequency Augmentation for Transformer-Based Person Re-Identification

Guiwei Zhang · Yongfei Zhang · Tianyu Zhang · Bo Li · Shiliang Pu

Although recent studies empirically show that injecting Convolutional Neural Networks (CNNs) into Vision Transformers (ViTs) can improve the performance of person re-identification, the rationale behind it remains elusive. From a frequency perspective, we reveal that ViTs perform worse than CNNs in preserving key high-frequency components (e.g, clothes texture details) since high-frequency components are inevitably diluted by low-frequency ones due to the intrinsic Self-Attention within ViTs. To remedy such inadequacy of the ViT, we propose a Patch-wise High-frequency Augmentation (PHA) method with two core designs. First, to enhance the feature representation ability of high-frequency components, we split patches with high-frequency components by the Discrete Haar Wavelet Transform, then empower the ViT to take the split patches as auxiliary input. Second, to prevent high-frequency components from being diluted by low-frequency ones when taking the entire sequence as input during network optimization, we propose a novel patch-wise contrastive loss. From the view of gradient optimization, it acts as an implicit augmentation to improve the representation ability of key high-frequency components. This benefits the ViT to capture key high-frequency components to extract discriminative person representations. PHA is necessary during training and can be removed during inference, without bringing extra complexity. Extensive experiments on widely-used ReID datasets validate the effectiveness of our method.


171
PyramidFlow: High-Resolution Defect Contrastive Localization Using Pyramid Normalizing Flow

Jiarui Lei · Xiaobo Hu · Yue Wang · Dong Liu

During industrial processing, unforeseen defects may arise in products due to uncontrollable factors. Although unsupervised methods have been successful in defect localization, the usual use of pre-trained models results in low-resolution outputs, which damages visual performance. To address this issue, we propose PyramidFlow, the first fully normalizing flow method without pre-trained models that enables high-resolution defect localization. Specifically, we propose a latent template-based defect contrastive localization paradigm to reduce intra-class variance, as the pre-trained models do. In addition, PyramidFlow utilizes pyramid-like normalizing flows for multi-scale fusing and volume normalization to help generalization. Our comprehensive studies on MVTecAD demonstrate the proposed method outperforms the comparable algorithms that do not use external priors, even achieving state-of-the-art performance in more challenging BTAD scenarios.


172
Neural Fourier Filter Bank

Zhijie Wu · Yuhe Jin · Kwang Moo Yi

We present a novel method to provide efficient and highly detailed reconstructions. Inspired by wavelets, we learn a neural field that decompose the signal both spatially and frequency-wise. We follow the recent grid-based paradigm for spatial decomposition, but unlike existing work, encourage specific frequencies to be stored in each grid via Fourier features encodings. We then apply a multi-layer perceptron with sine activations, taking these Fourier encoded features in at appropriate layers so that higher-frequency components are accumulated on top of lower-frequency components sequentially, which we sum up to form the final output. We demonstrate that our method outperforms the state of the art regarding model compactness and convergence speed on multiple tasks: 2D image fitting, 3D shape reconstruction, and neural radiance fields. Our code is available at https://github.com/ubc-vision/NFFB.


173
Restoration of Hand-Drawn Architectural Drawings Using Latent Space Mapping With Degradation Generator

Nakkwan Choi · Seungjae Lee · Yongsik Lee · Seungjoon Yang

This work presents the restoration of drawings of wooden built heritage. Hand-drawn drawings contain the most important original information but are often severely degraded over time. A novel restoration method based on the vector quantized variational autoencoders is presented. Latent space representations of drawings and noise are learned, which are used to map noisy drawings to clean drawings for restoration and to generate authentic noisy drawings for data augmentation. The proposed method is applied to the drawings archived in the Cultural Heritage Administration. Restored drawings show significant quality improvement and allow more accurate interpretations of information.


174
Neural Preset for Color Style Transfer

Zhanghan Ke · Yuhao Liu · Lei Zhu · Nanxuan Zhao · Rynson W.H. Lau

In this paper, we present a Neural Preset technique to address the limitations of existing color style transfer methods, including visual artifacts, vast memory requirement, and slow style switching speed. Our method is based on two core designs. First, we propose Deterministic Neural Color Mapping (DNCM) to consistently operate on each pixel via an image-adaptive color mapping matrix, avoiding artifacts and supporting high-resolution inputs with a small memory footprint. Second, we develop a two-stage pipeline by dividing the task into color normalization and stylization, which allows efficient style switching by extracting color styles as presets and reusing them on normalized input images. Due to the unavailability of pairwise datasets, we describe how to train Neural Preset via a self-supervised strategy. Various advantages of Neural Preset over existing methods are demonstrated through comprehensive evaluations. Besides, we show that our trained model can naturally support multiple applications without fine-tuning, including low-light image enhancement, underwater image correction, image dehazing, and image harmonization.


175
NÜWA-LIP: Language-Guided Image Inpainting With Defect-Free VQGAN

Minheng Ni · Xiaoming Li · Wangmeng Zuo

Language-guided image inpainting aims to fill the defective regions of an image under the guidance of text while keeping the non-defective regions unchanged. However, directly encoding the defective images is prone to have an adverse effect on the non-defective regions, giving rise to distorted structures on non-defective parts. To better adapt the text guidance to the inpainting task, this paper proposes NÜWA-LIP, which involves defect-free VQGAN (DF-VQGAN) and a multi-perspective sequence-to-sequence module (MP-S2S). To be specific, DF-VQGAN introduces relative estimation to carefully control the receptive spreading, as well as symmetrical connections to protect structure details unchanged. For harmoniously embedding text guidance into the locally defective regions, MP-S2S is employed by aggregating the complementary perspectives from low-level pixels, high-level tokens as well as the text description. Experiments show that our DF-VQGAN effectively aids the inpainting process while avoiding unexpected changes in non-defective regions. Results on three open-domain benchmarks demonstrate the superior performance of our method against state-of-the-arts. Our code, datasets, and model will be made publicly available.


176
DualVector: Unsupervised Vector Font Synthesis With Dual-Part Representation

Ying-Tian Liu · Zhifei Zhang · Yuan-Chen Guo · Matthew Fisher · Zhaowen Wang · Song-Hai Zhang

Automatic generation of fonts can be an important aid to typeface design. Many current approaches regard glyphs as pixelated images, which present artifacts when scaling and inevitable quality losses after vectorization. On the other hand, existing vector font synthesis methods either fail to represent the shape concisely or require vector supervision during training. To push the quality of vector font synthesis to the next level, we propose a novel dual-part representation for vector glyphs, where each glyph is modeled as a collection of closed “positive” and “negative” path pairs. The glyph contour is then obtained by boolean operations on these paths. We first learn such a representation only from glyph images and devise a subsequent contour refinement step to align the contour with an image representation to further enhance details. Our method, named DualVector, outperforms state-of-the-art methods in vector font synthesis both quantitatively and qualitatively. Our synthesized vector fonts can be easily converted to common digital font formats like TrueType Font for practical use. The code is released at https://github.com/thuliu-yt16/dualvector.


177
DATID-3D: Diversity-Preserved Domain Adaptation Using Text-to-Image Diffusion for 3D Generative Model

Gwanghyun Kim · Se Young Chun

Recent 3D generative models have achieved remarkable performance in synthesizing high resolution photorealistic images with view consistency and detailed 3D shapes, but training them for diverse domains is challenging since it requires massive training images and their camera distribution information. Text-guided domain adaptation methods have shown impressive performance on converting the 2D generative model on one domain into the models on other domains with different styles by leveraging the CLIP (Contrastive Language-Image Pre-training), rather than collecting massive datasets for those domains. However, one drawback of them is that the sample diversity in the original generative model is not well-preserved in the domain-adapted generative models due to the deterministic nature of the CLIP text encoder. Text-guided domain adaptation will be even more challenging for 3D generative models not only because of catastrophic diversity loss, but also because of inferior text-image correspondence and poor image quality. Here we propose DATID-3D, a domain adaptation method tailored for 3D generative models using text-to-image diffusion models that can synthesize diverse images per text prompt without collecting additional images and camera information for the target domain. Unlike 3D extensions of prior text-guided domain adaptation methods, our novel pipeline was able to fine-tune the state-of-the-art 3D generator of the source domain to synthesize high resolution, multi-view consistent images in text-guided targeted domains without additional data, outperforming the existing text-guided domain adaptation methods in diversity and text-image correspondence. Furthermore, we propose and demonstrate diverse 3D image manipulations such as one-shot instance-selected adaptation and single-view manipulated 3D reconstruction to fully enjoy diversity in text.


178
GALIP: Generative Adversarial CLIPs for Text-to-Image Synthesis

Ming Tao · Bing-Kun Bao · Hao Tang · Changsheng Xu

Synthesizing high-fidelity complex images from text is challenging. Based on large pretraining, the autoregressive and diffusion models can synthesize photo-realistic images. Although these large models have shown notable progress, there remain three flaws. 1) These models require tremendous training data and parameters to achieve good performance. 2) The multi-step generation design slows the image synthesis process heavily. 3) The synthesized visual features are challenging to control and require delicately designed prompts. To enable high-quality, efficient, fast, and controllable text-to-image synthesis, we propose Generative Adversarial CLIPs, namely GALIP. GALIP leverages the powerful pretrained CLIP model both in the discriminator and generator. Specifically, we propose a CLIP-based discriminator. The complex scene understanding ability of CLIP enables the discriminator to accurately assess the image quality. Furthermore, we propose a CLIP-empowered generator that induces the visual concepts from CLIP through bridge features and prompts. The CLIP-integrated generator and discriminator boost training efficiency, and as a result, our model only requires about 3% training data and 6% learnable parameters, achieving comparable results to large pretrained autoregressive and diffusion models. Moreover, our model achieves 120 times faster synthesis speed and inherits the smooth latent space from GAN. The extensive experimental results demonstrate the excellent performance of our GALIP. Code is available at https://github.com/tobran/GALIP.


179
Fix the Noise: Disentangling Source Feature for Controllable Domain Translation

Dongyeun Lee · Jae Young Lee · Doyeon Kim · Jaehyun Choi · Jaejun Yoo · Junmo Kim

Recent studies show strong generative performance in domain translation especially by using transfer learning techniques on the unconditional generator. However, the control between different domain features using a single model is still challenging. Existing methods often require additional models, which is computationally demanding and leads to unsatisfactory visual quality. In addition, they have restricted control steps, which prevents a smooth transition. In this paper, we propose a new approach for high-quality domain translation with better controllability. The key idea is to preserve source features within a disentangled subspace of a target feature space. This allows our method to smoothly control the degree to which it preserves source features while generating images from an entirely new domain using only a single model. Our extensive experiments show that the proposed method can produce more consistent and realistic images than previous works and maintain precise controllability over different levels of transformation. The code is available at LeeDongYeun/FixNoise.


180
Conditional Text Image Generation With Diffusion Models

Yuanzhi Zhu · Zhaohai Li · Tianwei Wang · Mengchao He · Cong Yao

Current text recognition systems, including those for handwritten scripts and scene text, have relied heavily on image synthesis and augmentation, since it is difficult to realize real-world complexity and diversity through collecting and annotating enough real text images. In this paper, we explore the problem of text image generation, by taking advantage of the powerful abilities of Diffusion Models in generating photo-realistic and diverse image samples with given conditions, and propose a method called Conditional Text Image Generation with Diffusion Models (CTIG-DM for short). To conform to the characteristics of text images, we devise three conditions: image condition, text condition, and style condition, which can be used to control the attributes, contents, and styles of the samples in the image generation process. Specifically, four text image generation modes, namely: (1) synthesis mode, (2) augmentation mode, (3) recovery mode, and (4) imitation mode, can be derived by combining and configuring these three conditions. Extensive experiments on both handwritten and scene text demonstrate that the proposed CTIG-DM is able to produce image samples that simulate real-world complexity and diversity, and thus can boost the performance of existing text recognizers. Besides, CTIG-DM shows its appealing potential in domain adaptation and generating images containing Out-Of-Vocabulary (OOV) words.


181
ReCo: Region-Controlled Text-to-Image Generation

Zhengyuan Yang · Jianfeng Wang · Zhe Gan · Linjie Li · Kevin Lin · Chenfei Wu · Nan Duan · Zicheng Liu · Ce Liu · Michael Zeng · Lijuan Wang

Recently, large-scale text-to-image (T2I) models have shown impressive performance in generating high-fidelity images, but with limited controllability, e.g., precisely specifying the content in a specific region with a free-form text description. In this paper, we propose an effective technique for such regional control in T2I generation. We augment T2I models’ inputs with an extra set of position tokens, which represent the quantized spatial coordinates. Each region is specified by four position tokens to represent the top-left and bottom-right corners, followed by an open-ended natural language regional description. Then, we fine-tune a pre-trained T2I model with such new input interface. Our model, dubbed as ReCo (Region-Controlled T2I), enables the region control for arbitrary objects described by open-ended regional texts rather than by object labels from a constrained category set. Empirically, ReCo achieves better image quality than the T2I model strengthened by positional words (FID: 8.82 -> 7.36, SceneFID: 15.54 -> 6.51 on COCO), together with objects being more accurately placed, amounting to a 20.40% region classification accuracy improvement on COCO. Furthermore, we demonstrate that ReCo can better control the object count, spatial relationship, and region attributes such as color/size, with the free-form regional description. Human evaluation on PaintSkill shows that ReCo is +19.28% and +17.21% more accurate in generating images with correct object count and spatial relationship than the T2I model.


182
Highlight
Freestyle Layout-to-Image Synthesis

Han Xue · Zhiwu Huang · Qianru Sun · Li Song · Wenjun Zhang

Typical layout-to-image synthesis (LIS) models generate images for a closed set of semantic classes, e.g., 182 common objects in COCO-Stuff. In this work, we explore the freestyle capability of the model, i.e., how far can it generate unseen semantics (e.g., classes, attributes, and styles) onto a given layout, and call the task Freestyle LIS (FLIS). Thanks to the development of large-scale pre-trained language-image models, a number of discriminative models (e.g., image classification and object detection) trained on limited base classes are empowered with the ability of unseen class prediction. Inspired by this, we opt to leverage large-scale pre-trained text-to-image diffusion models to achieve the generation of unseen semantics. The key challenge of FLIS is how to enable the diffusion model to synthesize images from a specific layout which very likely violates its pre-learned knowledge, e.g., the model never sees “a unicorn sitting on a bench” during its pre-training. To this end, we introduce a new module called Rectified Cross-Attention (RCA) that can be conveniently plugged in the diffusion model to integrate semantic masks. This “plug-in” is applied in each cross-attention layer of the model to rectify the attention maps between image and text tokens. The key idea of RCA is to enforce each text token to act on the pixels in a specified region, allowing us to freely put a wide variety of semantics from pre-trained knowledge (which is general) onto the given layout (which is specific). Extensive experiments show that the proposed diffusion network produces realistic and freestyle layout-to-image generation results with diverse text inputs, which has a high potential to spawn a bunch of interesting applications. Code is available at https://github.com/essunny310/FreestyleNet.


183
Specialist Diffusion: Plug-and-Play Sample-Efficient Fine-Tuning of Text-to-Image Diffusion Models To Learn Any Unseen Style

Haoming Lu · Hazarapet Tunanyan · Kai Wang · Shant Navasardyan · Zhangyang Wang · Humphrey Shi

Diffusion models have demonstrated impressive capability of text-conditioned image synthesis, and broader application horizons are emerging by personalizing those pretrained diffusion models toward generating some specialized target object or style. In this paper, we aim to learn an unseen style by simply fine-tuning a pre-trained diffusion model with a handful of images (e.g., less than 10), so that the fine-tuned model can generate high-quality images of arbitrary objects in this style. Such extremely lowshot fine-tuning is accomplished by a novel toolkit of finetuning techniques, including text-to-image customized data augmentations, a content loss to facilitate content-style disentanglement, and sparse updating that focuses on only a few time steps. Our framework, dubbed Specialist Diffusion, is plug-and-play to existing diffusion model backbones and other personalization techniques. We demonstrate it to outperform the latest few-shot personalization alternatives of diffusion models such as Textual Inversion and DreamBooth, in terms of learning highly sophisticated styles with ultra-sample-efficient tuning. We further show that Specialist Diffusion can be integrated on top of textual inversion to boost performance further, even on highly unusual styles. Our codes are available at: https://github.com/Picsart-AI-Research/Specialist-Diffusion


184
Toward Verifiable and Reproducible Human Evaluation for Text-to-Image Generation

Mayu Otani · Riku Togashi · Yu Sawai · Ryosuke Ishigami · Yuta Nakashima · Esa Rahtu · Janne Heikkilä · Shin’ichi Satoh

Human evaluation is critical for validating the performance of text-to-image generative models, as this highly cognitive process requires deep comprehension of text and images. However, our survey of 37 recent papers reveals that many works rely solely on automatic measures (e.g., FID) or perform poorly described human evaluations that are not reliable or repeatable. This paper proposes a standardized and well-defined human evaluation protocol to facilitate verifiable and reproducible human evaluation in future works. In our pilot data collection, we experimentally show that the current automatic measures are incompatible with human perception in evaluating the performance of the text-to-image generation results. Furthermore, we provide insights for designing human evaluation experiments reliably and conclusively. Finally, we make several resources publicly available to the community to facilitate easy and fast implementations.


185
Highlight
Towards Flexible Multi-Modal Document Models

Naoto Inoue · Kotaro Kikuchi · Edgar Simo-Serra · Mayu Otani · Kota Yamaguchi

Creative workflows for generating graphical documents involve complex inter-related tasks, such as aligning elements, choosing appropriate fonts, or employing aesthetically harmonious colors. In this work, we attempt at building a holistic model that can jointly solve many different design tasks. Our model, which we denote by FlexDM, treats vector graphic documents as a set of multi-modal elements, and learns to predict masked fields such as element type, position, styling attributes, image, or text, using a unified architecture. Through the use of explicit multi-task learning and in-domain pre-training, our model can better capture the multi-modal relationships among the different document fields. Experimental results corroborate that our single FlexDM is able to successfully solve a multitude of different design tasks, while achieving performance that is competitive with task-specific and costly baselines.


186
Award Candidate
On Distillation of Guided Diffusion Models

Chenlin Meng · Robin Rombach · Ruiqi Gao · Diederik Kingma · Stefano Ermon · Jonathan Ho · Tim Salimans

Classifier-free guided diffusion models have recently been shown to be highly effective at high-resolution image generation, and they have been widely used in large-scale diffusion frameworks including DALL·E 2, Stable Diffusion and Imagen. However, a downside of classifier-free guided diffusion models is that they are computationally expensive at inference time since they require evaluating two diffusion models, a class-conditional model and an unconditional model, tens to hundreds of times. To deal with this limitation, we propose an approach to distilling classifier-free guided diffusion models into models that are fast to sample from: Given a pre-trained classifier-free guided model, we first learn a single model to match the output of the combined conditional and unconditional models, and then we progressively distill that model to a diffusion model that requires much fewer sampling steps. For standard diffusion models trained on the pixel-space, our approach is able to generate images visually comparable to that of the original model using as few as 4 sampling steps on ImageNet 64x64 and CIFAR-10, achieving FID/IS scores comparable to that of the original model while being up to 256 times faster to sample from. For diffusion models trained on the latent-space (e.g., Stable Diffusion), our approach is able to generate high-fidelity images using as few as 1 to 4 denoising steps, accelerating inference by at least 10-fold compared to existing methods on ImageNet 256x256 and LAION datasets. We further demonstrate the effectiveness of our approach on text-guided image editing and inpainting, where our distilled model is able to generate high-quality results using as few as 2-4 denoising steps.


187
Dimensionality-Varying Diffusion Process

Han Zhang · Ruili Feng · Zhantao Yang · Lianghua Huang · Yu Liu · Yifei Zhang · Yujun Shen · Deli Zhao · Jingren Zhou · Fan Cheng

Diffusion models, which learn to reverse a signal destruction process to generate new data, typically require the signal at each step to have the same dimension. We argue that, considering the spatial redundancy in image signals, there is no need to maintain a high dimensionality in the evolution process, especially in the early generation phase. To this end, we make a theoretical generalization of the forward diffusion process via signal decomposition. Concretely, we manage to decompose an image into multiple orthogonal components and control the attenuation of each component when perturbing the image. That way, along with the noise strength increasing, we are able to diminish those inconsequential components and thus use a lower-dimensional signal to represent the source, barely losing information. Such a reformulation allows to vary dimensions in both training and inference of diffusion models. Extensive experiments on a range of datasets suggest that our approach substantially reduces the computational cost and achieves on-par or even better synthesis performance compared to baseline methods. We also show that our strategy facilitates high-resolution image synthesis and improves FID of diffusion model trained on FFHQ at 1024×1024 resolution from 52.40 to 10.46. Code is available at https://github.com/damo-vilab/dvdp.


188
Shape-Aware Text-Driven Layered Video Editing

Yao-Chih Lee · Ji-Ze Genevieve Jang · Yi-Ting Chen · Elizabeth Qiu · Jia-Bin Huang

Temporal consistency is essential for video editing applications. Existing work on layered representation of videos allows propagating edits consistently to each frame. These methods, however, can only edit object appearance rather than object shape changes due to the limitation of using a fixed UV mapping field for texture atlas. We present a shape-aware, text-driven video editing method to tackle this challenge. To handle shape changes in video editing, we first propagate the deformation field between the input and edited keyframe to all frames. We then leverage a pre-trained text-conditioned diffusion model as guidance for refining shape distortion and completing unseen regions. The experimental results demonstrate that our method can achieve shape-aware consistent video editing and compare favorably with the state-of-the-art.


189
Rethinking Image Super Resolution From Long-Tailed Distribution Learning Perspective

Yuanbiao Gou · Peng Hu · Jiancheng Lv · Hongyuan Zhu · Xi Peng

Existing studies have empirically observed that the resolution of the low-frequency region is easier to enhance than that of the high-frequency one. Although plentiful works have been devoted to alleviating this problem, little understanding is given to explain it. In this paper, we try to give a feasible answer from a machine learning perspective, i.e., the twin fitting problem caused by the long-tailed pixel distribution in natural images. With this explanation, we reformulate image super resolution (SR) as a long-tailed distribution learning problem and solve it by bridging the gaps of the problem between in low- and high-level vision tasks. As a result, we design a long-tailed distribution learning solution, that rebalances the gradients from the pixels in the low- and high-frequency region, by introducing a static and a learnable structure prior. The learned SR model achieves better balance on the fitting of the low- and high-frequency region so that the overall performance is improved. In the experiments, we evaluate the solution on four CNN- and one Transformer-based SR models w.r.t. six datasets and three tasks, and experimental results demonstrate its superiority.


190
End-to-End Video Matting With Trimap Propagation

Wei-Lun Huang · Ming-Sui Lee

The research of video matting mainly focuses on temporal coherence and has gained significant improvement via neural networks. However, matting usually relies on user-annotated trimaps to estimate alpha values, which is a labor-intensive issue. Although recent studies exploit video object segmentation methods to propagate the given trimaps, they suffer inconsistent results. Here we present a more robust and faster end-to-end video matting model equipped with trimap propagation called FTP-VM (Fast Trimap Propagation - Video Matting). The FTP-VM combines trimap propagation and video matting in one model, where the additional backbone in memory matching is replaced with the proposed lightweight trimap fusion module. The segmentation consistency loss is adopted from automotive segmentation to fit trimap segmentation with the collaboration of RNN (Recurrent Neural Network) to improve the temporal coherence. The experimental results demonstrate that the FTP-VM performs competitively both in composited and real videos only with few given trimaps. The efficiency is eight times higher than the state-of-the-art methods, which confirms its robustness and applicability in real-time scenarios. The code is available at https://github.com/csvt32745/FTP-VM


191
Context-Based Trit-Plane Coding for Progressive Image Compression

Seungmin Jeon · Kwang Pyo Choi · Youngo Park · Chang-Su Kim

Trit-plane coding enables deep progressive image compression, but it cannot use autoregressive context models. In this paper, we propose the context-based trit-plane coding (CTC) algorithm to achieve progressive compression more compactly. First, we develop the context-based rate reduction module to estimate trit probabilities of latent elements accurately and thus encode the trit-planes compactly. Second, we develop the context-based distortion reduction module to refine partial latent tensors from the trit-planes and improve the reconstructed image quality. Third, we propose a retraining scheme for the decoder to attain better rate-distortion tradeoffs. Extensive experiments show that CTC outperforms the baseline trit-plane codec significantly, e.g. by -14.84% in BD-rate on the Kodak lossless dataset, while increasing the time complexity only marginally. The source codes are available at https://github.com/seungminjeon-github/CTC.


192
Complexity-Guided Slimmable Decoder for Efficient Deep Video Compression

Zhihao Hu · Dong Xu

In this work, we propose the complexity-guided slimmable decoder (cgSlimDecoder) in combination with skip-adaptive entropy coding (SaEC) for efficient deep video compression. Specifically, given the target complexity constraints, in our cgSlimDecoder, we introduce a set of new channel width selection modules to automatically decide the optimal channel width of each slimmable convolution layer. By optimizing the complexity-rate-distortion related objective function to directly learn the parameters of the newly introduced channel width selection modules and other modules in the decoder, our cgSlimDecoder can automatically allocate the optimal numbers of parameters for different types of modules (e.g., motion/residual decoder and the motion compensation network) and simultaneously support multiple complexity levels by using a single learnt decoder instead of multiple decoders. In addition, our proposed SaEC can further accelerate the entropy decoding procedure in both motion and residual decoders by simply skipping the entropy coding process for the elements in the encoded feature maps that are already well-predicted by the hyperprior network. As demonstrated in our comprehensive experiments, our newly proposed methods cgSlimDecoder and SaEC are general and can be readily incorporated into three widely used deep video codecs (i.e., DVC, FVC and DCVC) to significantly improve their coding efficiency with negligible performance drop.


193
Efficient Hierarchical Entropy Model for Learned Point Cloud Compression

Rui Song · Chunyang Fu · Shan Liu · Ge Li

Learning an accurate entropy model is a fundamental way to remove the redundancy in point cloud compression. Recently, the octree-based auto-regressive entropy model which adopts the self-attention mechanism to explore dependencies in a large-scale context is proved to be promising. However, heavy global attention computations and auto-regressive contexts are inefficient for practical applications. To improve the efficiency of the attention model, we propose a hierarchical attention structure that has a linear complexity to the context scale and maintains the global receptive field. Furthermore, we present a grouped context structure to address the serial decoding issue caused by the auto-regression while preserving the compression performance. Experiments demonstrate that the proposed entropy model achieves superior rate-distortion performance and significant decoding latency reduction compared with the state-of-the-art large-scale auto-regressive entropy model.


194
NIRVANA: Neural Implicit Representations of Videos With Adaptive Networks and Autoregressive Patch-Wise Modeling

Shishira R Maiya · Sharath Girish · Max Ehrlich · Hanyu Wang · Kwot Sin Lee · Patrick Poirson · Pengxiang Wu · Chen Wang · Abhinav Shrivastava

Implicit Neural Representations (INR) have recently shown to be powerful tool for high-quality video compression. However, existing works are limiting as they do not explicitly exploit the temporal redundancy in videos, leading to a long encoding time. Additionally, these methods have fixed architectures which do not scale to longer videos or higher resolutions. To address these issues, we propose NIRVANA, which treats videos as groups of frames and fits separate networks to each group performing patch-wise prediction. %This design shares computation within each group, in the spatial and temporal dimensions, resulting in reduced encoding time of the video. The video representation is modeled autoregressively, with networks fit on a current group initialized using weights from the previous group’s model. To further enhance efficiency, we perform quantization of the network parameters during training, requiring no post-hoc pruning or quantization. When compared with previous works on the benchmark UVG dataset, NIRVANA improves encoding quality from 37.36 to 37.70 (in terms of PSNR) and the encoding speed by 12×, while maintaining the same compression rate. In contrast to prior video INR works which struggle with larger resolution and longer videos, we show that our algorithm is highly flexible and scales naturally due to its patch-wise and autoregressive designs. Moreover, our method achieves variable bitrate compression by adapting to videos with varying inter-frame motion. NIRVANA achieves 6× decoding speed and scales well with more GPUs, making it practical for various deployment scenarios.


195
Highlight
Learned Image Compression With Mixed Transformer-CNN Architectures

Jinming Liu · Heming Sun · Jiro Katto

Learned image compression (LIC) methods have exhibited promising progress and superior rate-distortion performance compared with classical image compression standards. Most existing LIC methods are Convolutional Neural Networks-based (CNN-based) or Transformer-based, which have different advantages. Exploiting both advantages is a point worth exploring, which has two challenges: 1) how to effectively fuse the two methods? 2) how to achieve higher performance with a suitable complexity? In this paper, we propose an efficient parallel Transformer-CNN Mixture (TCM) block with a controllable complexity to incorporate the local modeling ability of CNN and the non-local modeling ability of transformers to improve the overall architecture of image compression models. Besides, inspired by the recent progress of entropy estimation models and attention modules, we propose a channel-wise entropy model with parameter-efficient swin-transformer-based attention (SWAtten) modules by using channel squeezing. Experimental results demonstrate our proposed method achieves state-of-the-art rate-distortion performances on three different resolution datasets (i.e., Kodak, Tecnick, CLIC Professional Validation) compared to existing LIC methods. The code is at https://github.com/jmliu206/LIC_TCM.


196
Memory-Friendly Scalable Super-Resolution via Rewinding Lottery Ticket Hypothesis

Jin Lin · Xiaotong Luo · Ming Hong · Yanyun Qu · Yuan Xie · Zongze Wu

Scalable deep Super-Resolution (SR) models are increasingly in demand, whose memory can be customized and tuned to the computational recourse of the platform. The existing dynamic scalable SR methods are not memory-friendly enough because multi-scale models have to be saved with a fixed size for each model. Inspired by the success of Lottery Tickets Hypothesis (LTH) on image classification, we explore the existence of unstructured scalable SR deep models, that is, we find gradual shrinkage sub-networks of extreme sparsity named winning tickets. In this paper, we propose a Memory-friendly Scalable SR framework (MSSR). The advantage is that only a single scalable model covers multiple SR models with different sizes, instead of reloading SR models of different sizes. Concretely, MSSR consists of the forward and backward stages, the former for model compression and the latter for model expansion. In the forward stage, we take advantage of LTH with rewinding weights to progressively shrink the SR model and the pruning-out masks that form nested sets. Moreover, stochastic self-distillation (SSD) is conducted to boost the performance of sub-networks. By stochastically selecting multiple depths, the current model inputs the selected features into the corresponding parts in the larger model and improves the performance of the current model based on the feedback results of the larger model. In the backward stage, the smaller SR model could be expanded by recovering and fine-tuning the pruned parameters according to the pruning-out masks obtained in the forward. Extensive experiments show the effectiveness of MMSR. The smallest-scale sub-network could achieve the sparsity of 94% and outperforms the compared lightweight SR methods.


197
Highlight
InternImage: Exploring Large-Scale Vision Foundation Models With Deformable Convolutions

Wenhai Wang · Jifeng Dai · Zhe Chen · Zhenhang Huang · Zhiqi Li · Xizhou Zhu · Xiaowei Hu · Tong Lu · Lewei Lu · Hongsheng Li · Xiaogang Wang · Yu Qiao

Compared to the great progress of large-scale vision transformers (ViTs) in recent years, large-scale models based on convolutional neural networks (CNNs) are still in an early state. This work presents a new large-scale CNN-based foundation model, termed InternImage, which can obtain the gain from increasing parameters and training data like ViTs. Different from the recent CNNs that focus on large dense kernels, InternImage takes deformable convolution as the core operator, so that our model not only has the large effective receptive field required for downstream tasks such as detection and segmentation, but also has the adaptive spatial aggregation conditioned by input and task information. As a result, the proposed InternImage reduces the strict inductive bias of traditional CNNs and makes it possible to learn stronger and more robust patterns with large-scale parameters from massive data like ViTs. The effectiveness of our model is proven on challenging benchmarks including ImageNet, COCO, and ADE20K. It is worth mentioning that InternImage-H achieved a new record 65.4 mAP on COCO test-dev and 62.9 mIoU on ADE20K, outperforming current leading CNNs and ViTs.


198
EfficientViT: Memory Efficient Vision Transformer With Cascaded Group Attention

Xinyu Liu · Houwen Peng · Ningxin Zheng · Yuqing Yang · Han Hu · Yixuan Yuan

Vision transformers have shown great success due to their high model capabilities. However, their remarkable performance is accompanied by heavy computation costs, which makes them unsuitable for real-time applications. In this paper, we propose a family of high-speed vision transformers named EfficientViT. We find that the speed of existing transformer models is commonly bounded by memory inefficient operations, especially the tensor reshaping and element-wise functions in MHSA. Therefore, we design a new building block with a sandwich layout, i.e., using a single memory-bound MHSA between efficient FFN layers, which improves memory efficiency while enhancing channel communication. Moreover, we discover that the attention maps share high similarities across heads, leading to computational redundancy. To address this, we present a cascaded group attention module feeding attention heads with different splits of the full feature, which not only saves computation cost but also improves attention diversity. Comprehensive experiments demonstrate EfficientViT outperforms existing efficient models, striking a good trade-off between speed and accuracy. For instance, our EfficientViT-M5 surpasses MobileNetV3-Large by 1.9% in accuracy, while getting 40.4% and 45.2% higher throughput on Nvidia V100 GPU and Intel Xeon CPU, respectively. Compared to the recent efficient model MobileViT-XXS, EfficientViT-M2 achieves 1.8% superior accuracy, while running 5.8×/3.7× faster on the GPU/CPU, and 7.4× faster when converted to ONNX format. Code and models will be available soon.


199
Castling-ViT: Compressing Self-Attention via Switching Towards Linear-Angular Attention at Vision Transformer Inference

Haoran You · Yunyang Xiong · Xiaoliang Dai · Bichen Wu · Peizhao Zhang · Haoqi Fan · Peter Vajda · Yingyan (Celine) Lin

Vision Transformers (ViTs) have shown impressive performance but still require a high computation cost as compared to convolutional neural networks (CNNs), one reason is that ViTs’ attention measures global similarities and thus has a quadratic complexity with the number of input tokens. Existing efficient ViTs adopt local attention or linear attention, which sacrifice ViTs’ capabilities of capturing either global or local context. In this work, we ask an important research question: Can ViTs learn both global and local context while being more efficient during inference? To this end, we propose a framework called Castling-ViT, which trains ViTs using both linear-angular attention and masked softmax-based quadratic attention, but then switches to having only linear-angular attention during inference. Our Castling-ViT leverages angular kernels to measure the similarities between queries and keys via spectral angles. And we further simplify it with two techniques: (1) a novel linear-angular attention mechanism: we decompose the angular kernels into linear terms and high-order residuals, and only keep the linear terms; and (2) we adopt two parameterized modules to approximate high-order residuals: a depthwise convolution and an auxiliary masked softmax attention to help learn global and local information, where the masks for softmax attention are regularized to gradually become zeros and thus incur no overhead during inference. Extensive experiments validate the effectiveness of our Castling-ViT, e.g., achieving up to a 1.8% higher accuracy or 40% MACs reduction on classification and 1.2 higher mAP on detection under comparable FLOPs, as compared to ViTs with vanilla softmax-based attentions. Project page is available at https://www.haoranyou.com/castling-vit.


200
RIFormer: Keep Your Vision Backbone Effective but Removing Token Mixer

Jiahao Wang · Songyang Zhang · Yong Liu · Taiqiang Wu · Yujiu Yang · Xihui Liu · Kai Chen · Ping Luo · Dahua Lin

This paper studies how to keep a vision backbone effective while removing token mixers in its basic building blocks. Token mixers, as self-attention for vision transformers (ViTs), are intended to perform information communication between different spatial tokens but suffer from considerable computational cost and latency. However, directly removing them will lead to an incomplete model structure prior, and thus brings a significant accuracy drop. To this end, we first develop an RepIdentityFormer base on the re-parameterizing idea, to study the token mixer free model architecture. And we then explore the improved learning paradigm to break the limitation of simple token mixer free backbone, and summarize the empirical practice into 5 guidelines. Equipped with the proposed optimization strategy, we are able to build an extremely simple vision backbone with encouraging performance, while enjoying the high efficiency during inference. Extensive experiments and ablative analysis also demonstrate that the inductive bias of network architecture, can be incorporated into simple network structure with appropriate optimization strategy. We hope this work can serve as a starting point for the exploration of optimization-driven efficient network design.


201
High-Resolution Image Reconstruction With Latent Diffusion Models From Human Brain Activity

Yu Takagi · Shinji Nishimoto

Reconstructing visual experiences from human brain activity offers a unique way to understand how the brain represents the world, and to interpret the connection between computer vision models and our visual system. While deep generative models have recently been employed for this task, reconstructing realistic images with high semantic fidelity is still a challenging problem. Here, we propose a new method based on a diffusion model (DM) to reconstruct images from human brain activity obtained via functional magnetic resonance imaging (fMRI). More specifically, we rely on a latent diffusion model (LDM) termed Stable Diffusion. This model reduces the computational cost of DMs, while preserving their high generative performance. We also characterize the inner mechanisms of the LDM by studying how its different components (such as the latent vector Z, conditioning inputs C, and different elements of the denoising U-Net) relate to distinct brain functions. We show that our proposed method can reconstruct high-resolution images with high fidelity in straightforward fashion, without the need for any additional training and fine-tuning of complex deep-learning models. We also provide a quantitative interpretation of different LDM components from a neuroscientific perspective. Overall, our study proposes a promising method for reconstructing images from human brain activity, and provides a new framework for understanding DMs. Please check out our webpage at https://sites.google.com/view/stablediffusion-withbrain/.


202
Highlight
Non-Contrastive Unsupervised Learning of Physiological Signals From Video

Jeremy Speth · Nathan Vance · Patrick Flynn · Adam Czajka

Subtle periodic signals such as blood volume pulse and respiration can be extracted from RGB video, enabling noncontact health monitoring at low cost. Advancements in remote pulse estimation -- or remote photoplethysmography (rPPG) -- are currently driven by deep learning solutions. However, modern approaches are trained and evaluated on benchmark datasets with ground truth from contact-PPG sensors. We present the first non-contrastive unsupervised learning framework for signal regression to mitigate the need for labelled video data. With minimal assumptions of periodicity and finite bandwidth, our approach discovers the blood volume pulse directly from unlabelled videos. We find that encouraging sparse power spectra within normal physiological bandlimits and variance over batches of power spectra is sufficient for learning visual features of periodic signals. We perform the first experiments utilizing unlabelled video data not specifically created for rPPG to train robust pulse rate estimators. Given the limited inductive biases and impressive empirical results, the approach is theoretically capable of discovering other periodic signals from video, enabling multiple physiological measurements without the need for ground truth signals.


203
Revealing the Dark Secrets of Masked Image Modeling

Zhenda Xie · Zigang Geng · Jingcheng Hu · Zheng Zhang · Han Hu · Yue Cao

Masked image modeling (MIM) as pre-training is shown to be effective for numerous vision downstream tasks, but how and where MIM works remain unclear. In this paper, we compare MIM with the long-dominant supervised pre-trained models from two perspectives, the visualizations and the experiments, to uncover their key representational differences. From the visualizations, we find that MIM brings locality inductive bias to all layers of the trained models, but supervised models tend to focus locally at lower layers but more globally at higher layers. That may be the reason why MIM helps Vision Transformers that have a very large receptive field to optimize. Using MIM, the model can maintain a large diversity on attention heads in all layers. But for supervised models, the diversity on attention heads almost disappears from the last three layers and less diversity harms the fine-tuning performance. From the experiments, we find that MIM models can perform significantly better on geometric and motion tasks with weak semantics or fine-grained classification tasks, than their supervised counterparts. Without bells and whistles, a standard MIM pre-trained SwinV2-L could achieve state-of-the-art performance on pose estimation (78.9 AP on COCO test-dev and 78.0 AP on CrowdPose), depth estimation (0.287 RMSE on NYUv2 and 1.966 RMSE on KITTI), and video object tracking (70.7 SUC on LaSOT). For the semantic understanding datasets where the categories are sufficiently covered by the supervised pre-training, MIM models can still achieve highly competitive transfer performance. With a deeper understanding of MIM, we hope that our work can inspire new and solid research in this direction. Code will be available at https://github.com/zdaxie/MIM-DarkSecrets.


204
Improving Visual Representation Learning Through Perceptual Understanding

Samyakh Tukra · Frederick Hoffman · Ken Chatfield

We present an extension to masked autoencoders (MAE) which improves on the representations learnt by the model by explicitly encouraging the learning of higher scene-level features. We do this by: (i) the introduction of a perceptual similarity term between generated and real images (ii) incorporating several techniques from the adversarial training literature including multi-scale training and adaptive discriminator augmentation. The combination of these results in not only better pixel reconstruction but also representations which appear to capture better higher-level details within images. More consequentially, we show how our method, Perceptual MAE, leads to better performance when used for downstream tasks outperforming previous methods. We achieve 78.1% top-1 accuracy linear probing on ImageNet-1K and up to 88.1% when fine-tuning, with similar results for other downstream tasks, all without use of additional pre-trained models or data.


205
FlexiViT: One Model for All Patch Sizes

Lucas Beyer · Pavel Izmailov · Alexander Kolesnikov · Mathilde Caron · Simon Kornblith · Xiaohua Zhai · Matthias Minderer · Michael Tschannen · Ibrahim Alabdulmohsin · Filip Pavetic

Vision Transformers convert images to sequences by slicing them into patches. The size of these patches controls a speed/accuracy tradeoff, with smaller patches leading to higher accuracy at greater computational cost, but changing the patch size typically requires retraining the model. In this paper, we demonstrate that simply randomizing the patch size at training time leads to a single set of weights that performs well across a wide range of patch sizes, making it possible to tailor the model to different compute budgets at deployment time. We extensively evaluate the resulting model, which we call FlexiViT, on a wide range of tasks, including classification, image-text retrieval, openworld detection, panoptic segmentation, and semantic segmentation, concluding that it usually matches, and sometimes outperforms, standard ViT models trained at a single patch size in an otherwise identical setup. Hence, FlexiViT training is a simple drop-in improvement for ViT that makes it easy to add compute-adaptive capabilities to most models relying on a ViT backbone architecture. Code and pretrained models are available at github.com/googleresearch/big_vision.


206
AdaMAE: Adaptive Masking for Efficient Spatiotemporal Learning With Masked Autoencoders

Wele Gedara Chaminda Bandara · Naman Patel · Ali Gholami · Mehdi Nikkhah · Motilal Agrawal · Vishal M. Patel

Masked Autoencoders (MAEs) learn generalizable representations for image, text, audio, video, etc., by reconstructing masked input data from tokens of the visible data. Current MAE approaches for videos rely on random patch, tube, or frame based masking strategies to select these tokens. This paper proposes AdaMAE, an adaptive masking strategy for MAEs that is end-to-end trainable. Our adaptive masking strategy samples visible tokens based on the semantic context using an auxiliary sampling network. This network estimates a categorical distribution over spacetime-patch tokens. The tokens that increase the expected reconstruction error are rewarded and selected as visible tokens, motivated by the policy gradient algorithm in reinforcement learning. We show that AdaMAE samples more tokens from the high spatiotemporal information regions, thereby allowing us to mask 95% of tokens, resulting in lower memory requirements and faster pre-training. We conduct ablation studies on the Something-Something v2 (SSv2) dataset to demonstrate the efficacy of our adaptive sampling approach and report state-of-the-art results of 70.0% and 81.7% in top-1 accuracy on SSv2 and Kinetics-400 action classification datasets with a ViT-Base backbone and 800 pre-training epochs. Code and pre-trained models are available at: https://github.com/wgcban/adamae.git


207
SimpSON: Simplifying Photo Cleanup With Single-Click Distracting Object Segmentation Network

Chuong Huynh · Yuqian Zhou · Zhe Lin · Connelly Barnes · Eli Shechtman · Sohrab Amirghodsi · Abhinav Shrivastava

In photo editing, it is common practice to remove visual distractions to improve the overall image quality and highlight the primary subject. However, manually selecting and removing these small and dense distracting regions can be a laborious and time-consuming task. In this paper, we propose an interactive distractor selection method that is optimized to achieve the task with just a single click. Our method surpasses the precision and recall achieved by the traditional method of running panoptic segmentation and then selecting the segments containing the clicks. We also showcase how a transformer-based module can be used to identify more distracting regions similar to the user’s click position. Our experiments demonstrate that the model can effectively and accurately segment unknown distracting objects interactively and in groups. By significantly simplifying the photo cleaning and retouching process, our proposed model provides inspiration for exploring rare object segmentation and group selection with a single click.


208
Visual Dependency Transformers: Dependency Tree Emerges From Reversed Attention

Mingyu Ding · Yikang Shen · Lijie Fan · Zhenfang Chen · Zitian Chen · Ping Luo · Joshua B. Tenenbaum · Chuang Gan

Humans possess a versatile mechanism for extracting structured representations of our visual world. When looking at an image, we can decompose the scene into entities and their parts as well as obtain the dependencies between them. To mimic such capability, we propose Visual Dependency Transformers (DependencyViT) that can induce visual dependencies without any labels. We achieve that with a novel neural operator called reversed attention that can naturally capture long-range visual dependencies between image patches. Specifically, we formulate it as a dependency graph where a child token in reversed attention is trained to attend to its parent tokens and send information following a normalized probability distribution rather than gathering information in conventional self-attention. With such a design, hierarchies naturally emerge from reversed attention layers, and a dependency tree is progressively induced from leaf nodes to the root node unsupervisedly. DependencyViT offers several appealing benefits. (i) Entities and their parts in an image are represented by different subtrees, enabling part partitioning from dependencies; (ii) Dynamic visual pooling is made possible. The leaf nodes which rarely send messages can be pruned without hindering the model performance, based on which we propose the lightweight DependencyViT-Lite to reduce the computational and memory footprints; (iii) DependencyViT works well on both self- and weakly-supervised pretraining paradigms on ImageNet, and demonstrates its effectiveness on 8 datasets and 5 tasks, such as unsupervised part and saliency segmentation, recognition, and detection.


209
Iterative Next Boundary Detection for Instance Segmentation of Tree Rings in Microscopy Images of Shrub Cross Sections

Alexander Gillert · Giulia Resente · Alba Anadon-Rosell · Martin Wilmking · Uwe Freiherr von Lukas

We address the problem of detecting tree rings in microscopy images of shrub cross sections. This can be regarded as a special case of the instance segmentation task with several unique challenges such as the concentric circular ring shape of the objects and high precision requirements that result in inadequate performance of existing methods. We propose a new iterative method which we term Iterative Next Boundary Detection (INBD). It intuitively models the natural growth direction, starting from the center of the shrub cross section and detecting the next ring boundary in each iteration step. In our experiments, INBD shows superior performance to generic instance segmentation methods and is the only one with a built-in notion of chronological order. Our dataset and source code are available at http://github.com/alexander-g/INBD.


210
VideoMAE V2: Scaling Video Masked Autoencoders With Dual Masking

Limin Wang · Bingkun Huang · Zhiyu Zhao · Zhan Tong · Yinan He · Yi Wang · Yali Wang · Yu Qiao

Scale is the primary factor for building a powerful foundation model that could well generalize to a variety of downstream tasks. However, it is still challenging to train video foundation models with billions of parameters. This paper shows that video masked autoencoder (VideoMAE) is a scalable and general self-supervised pre-trainer for building video foundation models. We scale the VideoMAE in both model and data with a core design. Specifically, we present a dual masking strategy for efficient pre-training, with an encoder operating on a subset of video tokens and a decoder processing another subset of video tokens. Although VideoMAE is very efficient due to high masking ratio in encoder, masking decoder can still further reduce the overall computational cost. This enables the efficient pre-training of billion-level models in video. We also introduce a progressive training paradigm that involves initial pre-training on the diverse multi-sourced unlabeled dataset, followed by fine-tuning on a mixed labeled dataset. Finally, we successfully train a video ViT model with a billion parameters, which achieves a new state-of-the-art performance on the datasets of Kinetics (90.0% on K400 and 89.9% on K600) and Something-Something (68.7% on V1 and 77.0% on V2). In addition, we extensively verify the pre-trained video ViT models on a variety of downstream tasks, demonstrating its effectiveness as a general video representation learner.


211
DropMAE: Masked Autoencoders With Spatial-Attention Dropout for Tracking Tasks

Qiangqiang Wu · Tianyu Yang · Ziquan Liu · Baoyuan Wu · Ying Shan · Antoni B. Chan

In this paper, we study masked autoencoder (MAE) pretraining on videos for matching-based downstream tasks, including visual object tracking (VOT) and video object segmentation (VOS). A simple extension of MAE is to randomly mask out frame patches in videos and reconstruct the frame pixels. However, we find that this simple baseline heavily relies on spatial cues while ignoring temporal relations for frame reconstruction, thus leading to sub-optimal temporal matching representations for VOT and VOS. To alleviate this problem, we propose DropMAE, which adaptively performs spatial-attention dropout in the frame reconstruction to facilitate temporal correspondence learning in videos. We show that our DropMAE is a strong and efficient temporal matching learner, which achieves better finetuning results on matching-based tasks than the ImageNetbased MAE with 2× faster pre-training speed. Moreover, we also find that motion diversity in pre-training videos is more important than scene diversity for improving the performance on VOT and VOS. Our pre-trained DropMAE model can be directly loaded in existing ViT-based trackers for fine-tuning without further modifications. Notably, DropMAE sets new state-of-the-art performance on 8 out of 9 highly competitive video tracking and segmentation datasets. Our code and pre-trained models are available at https://github.com/jimmy-dq/DropMAE.git.


212
SeqTrack: Sequence to Sequence Learning for Visual Object Tracking

Xin Chen · Houwen Peng · Dong Wang · Huchuan Lu · Han Hu

In this paper, we present a new sequence-to-sequence learning framework for visual tracking, dubbed SeqTrack. It casts visual tracking as a sequence generation problem, which predicts object bounding boxes in an autoregressive fashion. This is different from prior Siamese trackers and transformer trackers, which rely on designing complicated head networks, such as classification and regression heads. SeqTrack only adopts a simple encoder-decoder transformer architecture. The encoder extracts visual features with a bidirectional transformer, while the decoder generates a sequence of bounding box values autoregressively with a causal transformer. The loss function is a plain cross-entropy. Such a sequence learning paradigm not only simplifies tracking framework, but also achieves competitive performance on benchmarks. For instance, SeqTrack gets 72.5% AUC on LaSOT, establishing a new state-of-the-art performance. Code and models are available at https://github.com/microsoft/VideoX.


213
Bootstrapping Objectness From Videos by Relaxed Common Fate and Visual Grouping

Long Lian · Zhirong Wu · Stella X. Yu

We study learning object segmentation from unlabeled videos. Humans can easily segment moving objects without knowing what they are. The Gestalt law of common fate, i.e., what move at the same speed belong together, has inspired unsupervised object discovery based on motion segmentation. However, common fate is not a reliable indicator of objectness: Parts of an articulated / deformable object may not move at the same speed, whereas shadows / reflections of an object always move with it but are not part of it. Our insight is to bootstrap objectness by first learning image features from relaxed common fate and then refining them based on visual appearance grouping within the image itself and across images statistically. Specifically, we learn an image segmenter first in the loop of approximating optical flow with constant segment flow plus small within-segment residual flow, and then by refining it for more coherent appearance and statistical figure-ground relevance. On unsupervised video object segmentation, using only ResNet and convolutional heads, our model surpasses the state-of-the-art by absolute gains of 7/9/5% on DAVIS16 / STv2 / FBMS59 respectively, demonstrating the effectiveness of our ideas. Our code is publicly available.


214
Video Event Restoration Based on Keyframes for Video Anomaly Detection

Zhiwei Yang · Jing Liu · Zhaoyang Wu · Peng Wu · Xiaotao Liu

Video anomaly detection (VAD) is a significant computer vision problem. Existing deep neural network (DNN) based VAD methods mostly follow the route of frame reconstruction or frame prediction. However, the lack of mining and learning of higher-level visual features and temporal context relationships in videos limits the further performance of these two approaches. Inspired by video codec theory, we introduce a brand-new VAD paradigm to break through these limitations: First, we propose a new task of video event restoration based on keyframes. Encouraging DNN to infer missing multiple frames based on video keyframes so as to restore a video event, which can more effectively motivate DNN to mine and learn potential higher-level visual features and comprehensive temporal context relationships in the video. To this end, we propose a novel U-shaped Swin Transformer Network with Dual Skip Connections (USTN-DSC) for video event restoration, where a cross-attention and a temporal upsampling residual skip connection are introduced to further assist in restoring complex static and dynamic motion object features in the video. In addition, we propose a simple and effective adjacent frame difference loss to constrain the motion consistency of the video sequence. Extensive experiments on benchmarks demonstrate that USTN-DSC outperforms most existing methods, validating the effectiveness of our method.


215
Streaming Video Model

Yucheng Zhao · Chong Luo · Chuanxin Tang · Dongdong Chen · Noel Codella · Zheng-Jun Zha

Video understanding tasks have traditionally been modeled by two separate architectures, specially tailored for two distinct tasks. Sequence-based video tasks, such as action recognition, use a video backbone to directly extract spatiotemporal features, while frame-based video tasks, such as multiple object tracking (MOT), rely on single fixed-image backbone to extract spatial features. In contrast, we propose to unify video understanding tasks into one novel streaming video architecture, referred to as Streaming Vision Transformer (S-ViT). S-ViT first produces frame-level features with a memory-enabled temporally-aware spatial encoder to serve the frame-based video tasks. Then the frame features are input into a task-related temporal decoder to obtain spatiotemporal features for sequence-based tasks. The efficiency and efficacy of S-ViT is demonstrated by the state-of-the-art accuracy in the sequence-based action recognition task and the competitive advantage over conventional architecture in the frame-based MOT task. We believe that the concept of streaming video model and the implementation of S-ViT are solid steps towards a unified deep learning architecture for video understanding. Code will be available at https://github.com/yuzhms/Streaming-Video-Model.


216
LSTFE-Net:Long Short-Term Feature Enhancement Network for Video Small Object Detection

Jinsheng Xiao · Yuanxu Wu · Yunhua Chen · Shurui Wang · Zhongyuan Wang · Jiayi Ma

Video small object detection is a difficult task due to the lack of object information. Recent methods focus on adding more temporal information to obtain more potent high-level features, which often fail to specify the most vital information for small objects, resulting in insufficient or inappropriate features. Since information from frames at different positions contributes differently to small objects, it is not ideal to assume that using one universal method will extract proper features. We find that context information from the long-term frame and temporal information from the short-term frame are two useful cues for video small object detection. To fully utilize these two cues, we propose a long short-term feature enhancement network (LSTFE-Net) for video small object detection. First, we develop a plug-and-play spatio-temporal feature alignment module to create temporal correspondences between the short-term and current frames. Then, we propose a frame selection module to select the long-term frame that can provide the most additional context information. Finally, we propose a long short-term feature aggregation module to fuse long short-term features. Compared to other state-of-the-art methods, our LSTFE-Net achieves 4.4% absolute boosts in AP on the FL-Drones dataset. More details can be found at https://github.com/xiaojs18/LSTFE-Net.


217
A Generalized Framework for Video Instance Segmentation

Miran Heo · Sukjun Hwang · Jeongseok Hyun · Hanjung Kim · Seoung Wug Oh · Joon-Young Lee · Seon Joo Kim

The handling of long videos with complex and occluded sequences has recently emerged as a new challenge in the video instance segmentation (VIS) community. However, existing methods have limitations in addressing this challenge. We argue that the biggest bottleneck in current approaches is the discrepancy between training and inference. To effectively bridge this gap, we propose a Generalized framework for VIS, namely GenVIS, that achieves state-of-the-art performance on challenging benchmarks without designing complicated architectures or requiring extra post-processing. The key contribution of GenVIS is the learning strategy, which includes a query-based training pipeline for sequential learning with a novel target label assignment. Additionally, we introduce a memory that effectively acquires information from previous states. Thanks to the new perspective, which focuses on building relationships between separate frames or clips, GenVIS can be flexibly executed in both online and semi-online manner. We evaluate our approach on popular VIS benchmarks, achieving state-of-the-art results on YouTube-VIS 2019/2021/2022 and Occluded VIS (OVIS). Notably, we greatly outperform the state-of-the-art on the long VIS benchmark (OVIS), improving 5.6 AP with ResNet-50 backbone. Code is available at https://github.com/miranheo/GenVIS.


218
Referring Multi-Object Tracking

Dongming Wu · Wencheng Han · Tiancai Wang · Xingping Dong · Xiangyu Zhang · Jianbing Shen

Existing referring understanding tasks tend to involve the detection of a single text-referred object. In this paper, we propose a new and general referring understanding task, termed referring multi-object tracking (RMOT). Its core idea is to employ a language expression as a semantic cue to guide the prediction of multi-object tracking. To the best of our knowledge, it is the first work to achieve an arbitrary number of referent object predictions in videos. To push forward RMOT, we construct one benchmark with scalable expressions based on KITTI, named Refer-KITTI. Specifically, it provides 18 videos with 818 expressions, and each expression in a video is annotated with an average of 10.7 objects. Further, we develop a transformer-based architecture TransRMOT to tackle the new task in an online manner, which achieves impressive detection performance and outperforms other counterparts. The Refer-KITTI dataset and the code are released at https://referringmot.github.io.


219
Source-Free Video Domain Adaptation With Spatial-Temporal-Historical Consistency Learning

Kai Li · Deep Patel · Erik Kruus · Martin Renqiang Min

Source-free domain adaptation (SFDA) is an emerging research topic that studies how to adapt a pretrained source model using unlabeled target data. It is derived from unsupervised domain adaptation but has the advantage of not requiring labeled source data to learn adaptive models. This makes it particularly useful in real-world applications where access to source data is restricted. While there has been some SFDA work for images, little attention has been paid to videos. Naively extending image-based methods to videos without considering the unique properties of videos often leads to unsatisfactory results. In this paper, we propose a simple and highly flexible method for Source-Free Video Domain Adaptation (SFVDA), which extensively exploits consistency learning for videos from spatial, temporal, and historical perspectives. Our method is based on the assumption that videos of the same action category are drawn from the same low-dimensional space, regardless of the spatio-temporal variations in the high-dimensional space that cause domain shifts. To overcome domain shifts, we simulate spatio-temporal variations by applying spatial and temporal augmentations on target videos, and encourage the model to make consistent predictions from a video and its augmented versions. Due to the simple design, our method can be applied to various SFVDA settings, and experiments show that our method achieves state-of-the-art performance for all the settings.


220
Seeing What You Said: Talking Face Generation Guided by a Lip Reading Expert

Jiadong Wang · Xinyuan Qian · Malu Zhang · Robby T. Tan · Haizhou Li

Talking face generation, also known as speech-to-lip generation, reconstructs facial motions concerning lips given coherent speech input. The previous studies revealed the importance of lip-speech synchronization and visual quality. Despite much progress, they hardly focus on the content of lip movements i.e., the visual intelligibility of the spoken words, which is an important aspect of generation quality. To address the problem, we propose using a lip-reading expert to improve the intelligibility of the generated lip regions by penalizing the incorrect generation results. Moreover, to compensate for data scarcity, we train the lip-reading expert in an audio-visual self-supervised manner. With a lip-reading expert, we propose a novel contrastive learning to enhance lip-speech synchronization, and a transformer to encode audio synchronically with video, while considering global temporal dependency of audio. For evaluation, we propose a new strategy with two different lip-reading experts to measure intelligibility of the generated videos. Rigorous experiments show that our proposal is superior to other State-of-the-art (SOTA) methods, such as Wav2Lip, in reading intelligibility i.e., over 38% Word Error Rate (WER) on LRS2 dataset and 27.8% accuracy on LRW dataset. We also achieve the SOTA performance in lip-speech synchronization and comparable performances in visual quality.


221
Egocentric Auditory Attention Localization in Conversations

Fiona Ryan · Hao Jiang · Abhinav Shukla · James M. Rehg · Vamsi Krishna Ithapu

In a noisy conversation environment such as a dinner party, people often exhibit selective auditory attention, or the ability to focus on a particular speaker while tuning out others. Recognizing who somebody is listening to in a conversation is essential for developing technologies that can understand social behavior and devices that can augment human hearing by amplifying particular sound sources. The computer vision and audio research communities have made great strides towards recognizing sound sources and speakers in scenes. In this work, we take a step further by focusing on the problem of localizing auditory attention targets in egocentric video, or detecting who in a camera wearer’s field of view they are listening to. To tackle the new and challenging Selective Auditory Attention Localization problem, we propose an end-to-end deep learning approach that uses egocentric video and multichannel audio to predict the heatmap of the camera wearer’s auditory attention. Our approach leverages spatiotemporal audiovisual features and holistic reasoning about the scene to make predictions, and outperforms a set of baselines on a challenging multi-speaker conversation dataset. Project page: https://fkryan.github.io/saal


222
iQuery: Instruments As Queries for Audio-Visual Sound Separation

Jiaben Chen · Renrui Zhang · Dongze Lian · Jiaqi Yang · Ziyao Zeng · Jianbo Shi

Current audio-visual separation methods share a standard architecture design where an audio encoder-decoder network is fused with visual encoding features at the encoder bottleneck. This design confounds the learning of multi-modal feature encoding with robust sound decoding for audio separation. To generalize to a new instrument, one must fine-tune the entire visual and audio network for all musical instruments. We re-formulate the visual-sound separation task and propose Instruments as Queries (iQuery) with a flexible query expansion mechanism. Our approach ensures cross-modal consistency and cross-instrument disentanglement. We utilize “visually named” queries to initiate the learning of audio queries and use cross-modal attention to remove potential sound source interference at the estimated waveforms. To generalize to a new instrument or event class, drawing inspiration from the text-prompt design, we insert additional queries as audio prompts while freezing the attention mechanism. Experimental results on three benchmarks demonstrate that our iQuery improves audio-visual sound source separation performance. Code is available at https://github.com/JiabenChen/iQuery.


223
Learning To Dub Movies via Hierarchical Prosody Models

Gaoxiang Cong · Liang Li · Yuankai Qi · Zheng-Jun Zha · Qi Wu · Wenyu Wang · Bin Jiang · Ming-Hsuan Yang · Qingming Huang

Given a piece of text, a video clip and a reference audio, the movie dubbing (also known as visual voice clone, V2C) task aims to generate speeches that match the speaker’s emotion presented in the video using the desired speaker voice as reference. V2C is more challenging than conventional text-to-speech tasks as it additionally requires the generated speech to exactly match the varying emotions and speaking speed presented in the video. Unlike previous works, we propose a novel movie dubbing architecture to tackle these problems via hierarchical prosody modeling, which bridges the visual information to corresponding speech prosody from three aspects: lip, face, and scene. Specifically, we align lip movement to the speech duration, and convey facial expression to speech energy and pitch via attention mechanism based on valence and arousal representations inspired by the psychology findings. Moreover, we design an emotion booster to capture the atmosphere from global video scenes. All these embeddings are used together to generate mel-spectrogram, which is then converted into speech waves by an existing vocoder. Extensive experimental results on the V2C and Chem benchmark datasets demonstrate the favourable performance of the proposed method. The code and trained models will be made available at https://github.com/GalaxyCong/HPMDubbing.


224
A Large-Scale Robustness Analysis of Video Action Recognition Models

Madeline Chantry Schiappa · Naman Biyani · Prudvi Kamtam · Shruti Vyas · Hamid Palangi · Vibhav Vineet · Yogesh S. Rawat

We have seen great progress in video action recognition in recent years. There are several models based on convolutional neural network (CNN) and some recent transformer based approaches which provide top performance on existing benchmarks. In this work, we perform a large-scale robustness analysis of these existing models for video action recognition. We focus on robustness against real-world distribution shift perturbations instead of adversarial perturbations. We propose four different benchmark datasets, HMDB51-P, UCF101-P, Kinetics400-P, and SSv2-P to perform this analysis. We study robustness of six state-of-the-art action recognition models against 90 different perturbations. The study reveals some interesting findings, 1) Transformer based models are consistently more robust compared to CNN based models, 2) Pre-training improves robustness for Transformer based models more than CNN based models, and 3) All of the studied models are robust to temporal perturbations for all datasets but SSv2; suggesting the importance of temporal information for action recognition varies based on the dataset and activities. Next, we study the role of augmentations in model robustness and present a real-world dataset, UCF101-DS, which contains realistic distribution shifts, to further validate some of these findings. We believe this study will serve as a benchmark for future research in robust video action recognition.


225
The Wisdom of Crowds: Temporal Progressive Attention for Early Action Prediction

Alexandros Stergiou · Dima Damen

Early action prediction deals with inferring the ongoing action from partially-observed videos, typically at the outset of the video. We propose a bottleneck-based attention model that captures the evolution of the action, through progressive sampling over fine-to-coarse scales. Our proposed Temporal Progressive (TemPr) model is composed of multiple attention towers, one for each scale. The predicted action label is based on the collective agreement considering confidences of these towers. Extensive experiments over four video datasets showcase state-of-the-art performance on the task of Early Action Prediction across a range of encoder architectures. We demonstrate the effectiveness and consistency of TemPr through detailed ablations.


226
STMixer: A One-Stage Sparse Action Detector

Tao Wu · Mengqi Cao · Ziteng Gao · Gangshan Wu · Limin Wang

Traditional video action detectors typically adopt the two-stage pipeline, where a person detector is first employed to yield actor boxes and then 3D RoIAlign is used to extract actor-specific features for classification. This detection paradigm requires multi-stage training and inference and cannot capture context information outside the bounding box. Recently, a few query-based action detectors are proposed to predict action instances in an end-to-end manner. However, they still lack adaptability in feature sampling or decoding, thus suffering from the issue of inferior performance or slower convergence. In this paper, we propose a new one-stage sparse action detector, termed STMixer. STMixer is based on two core designs. First, we present a query-based adaptive feature sampling module, which endows our STMixer with the flexibility of mining a set of discriminative features from the entire spatiotemporal domain. Second, we devise a dual-branch feature mixing module, which allows our STMixer to dynamically attend to and mix video features along the spatial and the temporal dimension respectively for better feature decoding. Coupling these two designs with a video backbone yields an efficient and accurate action detector. Without bells and whistles, STMixer obtains the state-of-the-art results on the datasets of AVA, UCF101-24, and JHMDB.


227
Generating Human Motion From Textual Descriptions With Discrete Representations

Jianrong Zhang · Yangsong Zhang · Xiaodong Cun · Yong Zhang · Hongwei Zhao · Hongtao Lu · Xi Shen · Ying Shan

In this work, we investigate a simple and must-known conditional generative framework based on Vector Quantised-Variational AutoEncoder (VQ-VAE) and Generative Pre-trained Transformer (GPT) for human motion generation from textural descriptions. We show that a simple CNN-based VQ-VAE with commonly used training recipes (EMA and Code Reset) allows us to obtain high-quality discrete representations. For GPT, we incorporate a simple corruption strategy during the training to alleviate training-testing discrepancy. Despite its simplicity, our T2M-GPT shows better performance than competitive approaches, including recent diffusion-based approaches. For example, on HumanML3D, which is currently the largest dataset, we achieve comparable performance on the consistency between text and generated motion (R-Precision), but with FID 0.116 largely outperforming MotionDiffuse of 0.630. Additionally, we conduct analyses on HumanML3D and observe that the dataset size is a limitation of our approach. Our work suggests that VQ-VAE still remains a competitive approach for human motion generation. Our implementation is available on the project page: https://mael-zys.github.io/T2M-GPT/


228
Cascade Evidential Learning for Open-World Weakly-Supervised Temporal Action Localization

Mengyuan Chen · Junyu Gao · Changsheng Xu

Targeting at recognizing and localizing action instances with only video-level labels during training, Weakly-supervised Temporal Action Localization (WTAL) has achieved significant progress in recent years. However, living in the dynamically changing open world where unknown actions constantly spring up, the closed-set assumption of existing WTAL methods is invalid. Compared with traditional open-set recognition tasks, Open-world WTAL (OWTAL) is challenging since not only are the annotations of unknown samples unavailable, but also the fine-grained annotations of known action instances can only be inferred ambiguously from the video category labels. To address this problem, we propose a Cascade Evidential Learning framework at an evidence level, which targets at OWTAL for the first time. Our method jointly leverages multi-scale temporal contexts and knowledge-guided prototype information to progressively collect cascade and enhanced evidence for known action, unknown action, and background separation. Extensive experiments conducted on THUMOS-14 and ActivityNet-v1.3 verify the effectiveness of our method. Besides the classification metrics adopted by previous open-set recognition methods, we also evaluate our method on localization metrics which are more reasonable for OWTAL.


229
Distilling Vision-Language Pre-Training To Collaborate With Weakly-Supervised Temporal Action Localization

Chen Ju · Kunhao Zheng · Jinxiang Liu · Peisen Zhao · Ya Zhang · Jianlong Chang · Qi Tian · Yanfeng Wang

Weakly-supervised temporal action localization (WTAL) learns to detect and classify action instances with only category labels. Most methods widely adopt the off-the-shelf Classification-Based Pre-training (CBP) to generate video features for action localization. However, the different optimization objectives between classification and localization, make temporally localized results suffer from the serious incomplete issue. To tackle this issue without additional annotations, this paper considers to distill free action knowledge from Vision-Language Pre-training (VLP), as we surprisingly observe that the localization results of vanilla VLP have an over-complete issue, which is just complementary to the CBP results. To fuse such complementarity, we propose a novel distillation-collaboration framework with two branches acting as CBP and VLP respectively. The framework is optimized through a dual-branch alternate training strategy. Specifically, during the B step, we distill the confident background pseudo-labels from the CBP branch; while during the F step, the confident foreground pseudo-labels are distilled from the VLP branch. As a result, the dual-branch complementarity is effectively fused to promote one strong alliance. Extensive experiments and ablation studies on THUMOS14 and ActivityNet1.2 reveal that our method significantly outperforms state-of-the-art methods.


230
Simultaneously Short- and Long-Term Temporal Modeling for Semi-Supervised Video Semantic Segmentation

Jiangwei Lao · Weixiang Hong · Xin Guo · Yingying Zhang · Jian Wang · Jingdong Chen · Wei Chu

In order to tackle video semantic segmentation task at a lower cost, e.g., only one frame annotated per video, lots of efforts have been devoted to investigate the utilization of those unlabeled frames by either assigning pseudo labels or performing feature enhancement. In this work, we propose a novel feature enhancement network to simultaneously model short- and long-term temporal correlation. Compared with existing work that only leverage short-term correspondence, the long-term temporal correlation obtained from distant frames can effectively expand the temporal perception field and provide richer contextual prior. More importantly, modeling adjacent and distant frames together can alleviate the risk of over-fitting, hence produce high-quality feature representation for the distant unlabeled frames in training set and unseen videos in testing set. To this end, we term our method SSLTM, short for Simultaneously Short- and Long-Term Temporal Modeling. In the setting of only one frame annotated per video, SSLTM significantly outperforms the state-of-the-art methods by 2% ~ 3% mIoU on the challenging VSPW dataset. Furthermore, when working with a pseudo label based method such as MeanTeacher, our final model only exhibits 0.13% mIoU less than the ceiling performance (i.e., all frames are manually annotated).


231
MIST: Multi-Modal Iterative Spatial-Temporal Transformer for Long-Form Video Question Answering

Difei Gao · Luowei Zhou · Lei Ji · Linchao Zhu · Yi Yang · Mike Zheng Shou

To build Video Question Answering (VideoQA) systems capable of assisting humans in daily activities, seeking answers from long-form videos with diverse and complex events is a must. Existing multi-modal VQA models achieve promising performance on images or short video clips, especially with the recent success of large-scale multi-modal pre-training. However, when extending these methods to long-form videos, new challenges arise. On the one hand, using a dense video sampling strategy is computationally prohibitive. On the other hand, methods relying on sparse sampling struggle in scenarios where multi-event and multi-granularity visual reasoning are required. In this work, we introduce a new model named Multi-modal Iterative Spatial-temporal Transformer (MIST) to better adapt pre-trained models for long-form VideoQA. Specifically, MIST decomposes traditional dense spatial-temporal self-attention into cascaded segment and region selection modules that adaptively select frames and image regions that are closely relevant to the question itself. Visual concepts at different granularities are then processed efficiently through an attention module. In addition, MIST iteratively conducts selection and attention over multiple layers to support reasoning over multiple events. The experimental results on four VideoQA datasets, including AGQA, NExT-QA, STAR, and Env-QA, show that MIST achieves state-of-the-art performance and is superior at computation efficiency and interpretability.


232
Highlight
Language-Guided Music Recommendation for Video via Prompt Analogies

Daniel McKee · Justin Salamon · Josef Sivic · Bryan Russell

We propose a method to recommend music for an input video while allowing a user to guide music selection with free-form natural language. A key challenge of this problem setting is that existing music video datasets provide the needed (video, music) training pairs, but lack text descriptions of the music. This work addresses this challenge with the following three contributions. First, we propose a text-synthesis approach that relies on an analogy-based prompting procedure to generate natural language music descriptions from a large-scale language model (BLOOM-176B) given pre-trained music tagger outputs and a small number of human text descriptions. Second, we use these synthesized music descriptions to train a new trimodal model, which fuses text and video input representations to query music samples. For training, we introduce a text dropout regularization mechanism which we show is critical to model performance. Our model design allows for the retrieved music audio to agree with the two input modalities by matching visual style depicted in the video and musical genre, mood, or instrumentation described in the natural language query. Third, to evaluate our approach, we collect a testing dataset for our problem by annotating a subset of 4k clips from the YT8M-MusicVideo dataset with natural language music descriptions which we make publicly available. We show that our approach can match or exceed the performance of prior methods on video-to-music retrieval while significantly improving retrieval accuracy when using text guidance.


233
Text-Visual Prompting for Efficient 2D Temporal Video Grounding

Yimeng Zhang · Xin Chen · Jinghan Jia · Sijia Liu · Ke Ding

In this paper, we study the problem of temporal video grounding (TVG), which aims to predict the starting/ending time points of moments described by a text sentence within a long untrimmed video. Benefiting from fine-grained 3D visual features, the TVG techniques have achieved remarkable progress in recent years. However, the high complexity of 3D convolutional neural networks (CNNs) makes extracting dense 3D visual features time-consuming, which calls for intensive memory and computing resources. Towards efficient TVG, we propose a novel text-visual prompting (TVP) framework, which incorporates optimized perturbation patterns (that we call ‘prompts’) into both visual inputs and textual features of a TVG model. In sharp contrast to 3D CNNs, we show that TVP allows us to effectively co-train vision encoder and language encoder in a 2D TVG model and improves the performance of crossmodal feature fusion using only low-complexity sparse 2D visual features. Further, we propose a Temporal-Distance IoU (TDIoU) loss for efficient learning of TVG. Experiments on two benchmark datasets, Charades-STA and ActivityNet Captions datasets, empirically show that the proposed TVP significantly boosts the performance of 2D TVG (e.g., 9.79% improvement on Charades-STA and 30.77% improvement on ActivityNet Captions) and achieves 5× inference acceleration over TVG using 3D visual features. Codes are available at Open.Intel.


234
CelebV-Text: A Large-Scale Facial Text-Video Dataset

Jianhui Yu · Hao Zhu · Liming Jiang · Chen Change Loy · Weidong Cai · Wayne Wu

Text-driven generation models are flourishing in video generation and editing. However, face-centric text-to-video generation remains a challenge due to the lack of a suitable dataset containing high-quality videos and highly relevant texts. This paper presents CelebV-Text, a large-scale, diverse, and high-quality dataset of facial text-video pairs, to facilitate research on facial text-to-video generation tasks. CelebV-Text comprises 70,000 in-the-wild face video clips with diverse visual content, each paired with 20 texts generated using the proposed semi-automatic text generation strategy. The provided texts are of high quality, describing both static and dynamic attributes precisely. The superiority of CelebV-Text over other datasets is demonstrated via comprehensive statistical analysis of the videos, texts, and text-video relevance. The effectiveness and potential of CelebV-Text are further shown through extensive self-evaluation. A benchmark is constructed with representative methods to standardize the evaluation of the facial text-to-video generation task. All data and models are publicly available.


235
CNVid-3.5M: Build, Filter, and Pre-Train the Large-Scale Public Chinese Video-Text Dataset

Tian Gan · Qing Wang · Xingning Dong · Xiangyuan Ren · Liqiang Nie · Qingpei Guo

Owing to well-designed large-scale video-text datasets, recent years have witnessed tremendous progress in video-text pre-training. However, existing large-scale video-text datasets are mostly English-only. Though there are certain methods studying the Chinese video-text pre-training, they pre-train their models on private datasets whose videos and text are unavailable. This lack of large-scale public datasets and benchmarks in Chinese hampers the research and downstream applications of Chinese video-text pre-training. Towards this end, we release and benchmark CNVid-3.5M, a large-scale public cross-modal dataset containing over 3.5M Chinese video-text pairs. We summarize our contributions by three verbs, i.e., “Build”, “Filter”, and “Pre-train”: 1) To build a public Chinese video-text dataset, we collect over 4.5M videos from the Chinese websites. 2) To improve the data quality, we propose a novel method to filter out 1M weakly-paired videos, resulting in the CNVid-3.5M dataset. And 3) we benchmark CNVid-3.5M with three mainstream pixel-level pre-training architectures. At last, we propose the Hard Sample Curriculum Learning strategy to promote the pre-training performance. To the best of our knowledge, CNVid-3.5M is the largest public video-text dataset in Chinese, and we provide the first pixel-level benchmarks for Chinese video-text pre-training. The dataset, codebase, and pre-trained models are available at https://github.com/CNVid/CNVid-3.5M.


236
Learning Procedure-Aware Video Representation From Instructional Videos and Their Narrations

Yiwu Zhong · Licheng Yu · Yang Bai · Shangwen Li · Xueting Yan · Yin Li

The abundance of instructional videos and their narrations over the Internet offers an exciting avenue for understanding procedural activities. In this work, we propose to learn video representation that encodes both action steps and their temporal ordering, based on a large-scale dataset of web instructional videos and their narrations, without using human annotations. Our method jointly learns a video representation to encode individual step concepts, and a deep probabilistic model to capture both temporal dependencies and immense individual variations in the step ordering. We empirically demonstrate that learning temporal ordering not only enables new capabilities for procedure reasoning, but also reinforces the recognition of individual steps. Our model significantly advances the state-of-the-art results on step classification (+2.8% / +3.3% on COIN / EPIC-Kitchens) and step forecasting (+7.4% on COIN). Moreover, our model attains promising results in zero-shot inference for step classification and forecasting, as well as in predicting diverse and plausible steps for incomplete procedures. Our code is available at https://github.com/facebookresearch/ProcedureVRL.


237
Highlight
PDPP:Projected Diffusion for Procedure Planning in Instructional Videos

Hanlin Wang · Yilu Wu · Sheng Guo · Limin Wang

In this paper, we study the problem of procedure planning in instructional videos, which aims to make goal-directed plans given the current visual observations in unstructured real-life videos. Previous works cast this problem as a sequence planning problem and leverage either heavy intermediate visual observations or natural language instructions as supervision, resulting in complex learning schemes and expensive annotation costs. In contrast, we treat this problem as a distribution fitting problem. In this sense, we model the whole intermediate action sequence distribution with a diffusion model (PDPP), and thus transform the planning problem to a sampling process from this distribution. In addition, we remove the expensive intermediate supervision, and simply use task labels from instructional videos as supervision instead. Our model is a U-Net based diffusion model, which directly samples action sequences from the learned distribution with the given start and end observations. Furthermore, we apply an efficient projection method to provide accurate conditional guides for our model during the learning and sampling process. Experiments on three datasets with different scales show that our PDPP model can achieve the state-of-the-art performance on multiple metrics, even without the task supervision. Code and trained models are available at https://github.com/MCG-NJU/PDPP.


238
Towards Fast Adaptation of Pretrained Contrastive Models for Multi-Channel Video-Language Retrieval

Xudong Lin · Simran Tiwari · Shiyuan Huang · Manling Li · Mike Zheng Shou · Heng Ji · Shih-Fu Chang

Multi-channel video-language retrieval require models to understand information from different channels (e.g. video+question, video+speech) to correctly link a video with a textual response or query. Fortunately, contrastive multimodal models are shown to be highly effective at aligning entities in images/videos and text, e.g., CLIP; text contrastive models are extensively studied recently for their strong ability of producing discriminative sentence embeddings, e.g., SimCSE. However, there is not a clear way to quickly adapt these two lines to multi-channel video-language retrieval with limited data and resources. In this paper, we identify a principled model design space with two axes: how to represent videos and how to fuse video and text information. Based on categorization of recent methods, we investigate the options of representing videos using continuous feature vectors or discrete text tokens; for the fusion method, we explore the use of a multimodal transformer or a pretrained contrastive text model. We extensively evaluate the four combinations on five video-language datasets. We surprisingly find that discrete text tokens coupled with a pretrained contrastive text model yields the best performance, which can even outperform state-of-the-art on the iVQA and How2QA datasets without additional training on millions of video-text data. Further analysis shows that this is because representing videos as text tokens captures the key visual information and text tokens are naturally aligned with text models that are strong retrievers after the contrastive pretraining process. All the empirical analysis establishes a solid foundation for future research on affordable and upgradable multimodal intelligence. The code will be released at https://github.com/XudongLinthu/upgradable-multimodal-intelligence to facilitate future research.


239
Clover: Towards a Unified Video-Language Alignment and Fusion Model

Jingjia Huang · Yinan Li · Jiashi Feng · Xinglong Wu · Xiaoshuai Sun · Rongrong Ji

Building a universal video-language model for solving various video understanding tasks (e.g., text-video retrieval, video question answering) is an open challenge to the machine learning field. Towards this goal, most recent works build the model by stacking uni-modal and cross-modal feature encoders and train it with pair-wise contrastive pre-text tasks. Though offering attractive generality, the resulted models have to compromise between efficiency and performance. They mostly adopt different architectures to deal with different downstream tasks. We find this is because the pair-wise training cannot well align and fuse features from different modalities. We then introduce Clover--a Correlated Video-Language pre-training method--towards a universal video-language model for solving multiple video understanding tasks with neither performance nor efficiency compromise. It improves cross-modal feature alignment and fusion via a novel tri-modal alignment pre-training task. Additionally, we propose to enhance the tri-modal alignment via incorporating learning from semantic masked samples and a new pair-wise ranking loss. Clover establishes new state-of-the-arts on multiple downstream tasks, including three retrieval tasks for both zero-shot and fine-tuning settings, and eight video question answering tasks. Codes and pre-trained models will be released at https://github.com/LeeYN-43/Clover.


240
Align and Attend: Multimodal Summarization With Dual Contrastive Losses

Bo He · Jun Wang · Jielin Qiu · Trung Bui · Abhinav Shrivastava · Zhaowen Wang

The goal of multimodal summarization is to extract the most important information from different modalities to form summaries. Unlike unimodal summarization, the multimodal summarization task explicitly leverages cross-modal information to help generate more reliable and high-quality summaries. However, existing methods fail to leverage the temporal correspondence between different modalities and ignore the intrinsic correlation between different samples. To address this issue, we introduce Align and Attend Multimodal Summarization (A2Summ), a unified multimodal transformer-based model which can effectively align and attend the multimodal input. In addition, we propose two novel contrastive losses to model both inter-sample and intra-sample correlations. Extensive experiments on two standard video summarization datasets (TVSum and SumMe) and two multimodal summarization datasets (Daily Mail and CNN) demonstrate the superiority of A2Summ, achieving state-of-the-art performances on all datasets. Moreover, we collected a large-scale multimodal summarization dataset BLiSS, which contains livestream videos and transcribed texts with annotated summaries. Our code and dataset are publicly available at https://boheumd.github.io/A2Summ/.


241
Learning Situation Hyper-Graphs for Video Question Answering

Aisha Urooj · Hilde Kuehne · Bo Wu · Kim Chheu · Walid Bousselham · Chuang Gan · Niels Lobo · Mubarak Shah

Answering questions about complex situations in videos requires not only capturing of the presence of actors, objects, and their relations, but also the evolution of these relationships over time. A situation hyper-graph is a representation that describes situations as scene sub-graphs for video frames and hyper-edges for connected sub-graphs, and has been proposed to capture all such information in a compact structured form. In this work, we propose an architecture for Video Question Answering (VQA) that enables answering questions related to video content by predicting situation hyper-graphs, coined Situation Hyper-Graph based Video Question Answering (SHG-VQA). To this end, we train a situation hyper-graph decoder to implicitly identify graph representations with actions and object/human-object relationships from the input video clip and to use cross-attention between the predicted situation hyper-graphs and the question embedding to predict the correct answer. The proposed method is trained in an end-to-end manner and optimized by a cross-entropy based VQA loss function and a Hungarian matching loss for the situation graph prediction. The effectiveness of the proposed architecture is extensively evaluated on two challenging benchmarks: AGQA and STAR. Our results show that learning the underlying situation hyper-graphs helps the system to significantly improve its performance for novel challenges of video question answering task.


242
Natural Language-Assisted Sign Language Recognition

Ronglai Zuo · Fangyun Wei · Brian Mak

Sign languages are visual languages which convey information by signers’ handshape, facial expression, body movement, and so forth. Due to the inherent restriction of combinations of these visual ingredients, there exist a significant number of visually indistinguishable signs (VISigns) in sign languages, which limits the recognition capacity of vision neural networks. To mitigate the problem, we propose the Natural Language-Assisted Sign Language Recognition (NLA-SLR) framework, which exploits semantic information contained in glosses (sign labels). First, for VISigns with similar semantic meanings, we propose language-aware label smoothing by generating soft labels for each training sign whose smoothing weights are computed from the normalized semantic similarities among the glosses to ease training. Second, for VISigns with distinct semantic meanings, we present an inter-modality mixup technique which blends vision and gloss features to further maximize the separability of different signs under the supervision of blended labels. Besides, we also introduce a novel backbone, video-keypoint network, which not only models both RGB videos and human body keypoints but also derives knowledge from sign videos of different temporal receptive fields. Empirically, our method achieves state-of-the-art performance on three widely-adopted benchmarks: MSASL, WLASL, and NMFs-CSL. Codes are available at https://github.com/FangyunWei/SLRT.


243
SkyEye: Self-Supervised Bird’s-Eye-View Semantic Mapping Using Monocular Frontal View Images

Nikhil Gosala · Kürsat Petek · Paulo L. J. Drews-Jr · Wolfram Burgard · Abhinav Valada

Bird’s-Eye-View (BEV) semantic maps have become an essential component of automated driving pipelines due to the rich representation they provide for decision-making tasks. However, existing approaches for generating these maps still follow a fully supervised training paradigm and hence rely on large amounts of annotated BEV data. In this work, we address this limitation by proposing the first self-supervised approach for generating a BEV semantic map using a single monocular image from the frontal view (FV). During training, we overcome the need for BEV ground truth annotations by leveraging the more easily available FV semantic annotations of video sequences. Thus, we propose the SkyEye architecture that learns based on two modes of self-supervision, namely, implicit supervision and explicit supervision. Implicit supervision trains the model by enforcing spatial consistency of the scene over time based on FV semantic sequences, while explicit supervision exploits BEV pseudolabels generated from FV semantic annotations and self-supervised depth estimates. Extensive evaluations on the KITTI-360 dataset demonstrate that our self-supervised approach performs on par with the state-of-the-art fully supervised methods and achieves competitive results using only 1% of direct supervision in BEV compared to fully supervised approaches. Finally, we publicly release both our code and the BEV datasets generated from the KITTI-360 and Waymo datasets.


244
Adaptive Zone-Aware Hierarchical Planner for Vision-Language Navigation

Chen Gao · Xingyu Peng · Mi Yan · He Wang · Lirong Yang · Haibing Ren · Hongsheng Li · Si Liu

The task of Vision-Language Navigation (VLN) is for an embodied agent to reach the global goal according to the instruction. Essentially, during navigation, a series of sub-goals need to be adaptively set and achieved, which is naturally a hierarchical navigation process. However, previous methods leverage a single-step planning scheme, i.e., directly performing navigation action at each step, which is unsuitable for such a hierarchical navigation process. In this paper, we propose an Adaptive Zone-aware Hierarchical Planner (AZHP) to explicitly divides the navigation process into two heterogeneous phases, i.e., sub-goal setting via zone partition/selection (high-level action) and sub-goal executing (low-level action), for hierarchical planning. Specifically, AZHP asynchronously performs two levels of action via the designed State-Switcher Module (SSM). For high-level action, we devise a Scene-aware adaptive Zone Partition (SZP) method to adaptively divide the whole navigation area into different zones on-the-fly. Then the Goal-oriented Zone Selection (GZS) method is proposed to select a proper zone for the current sub-goal. For low-level action, the agent conducts navigation-decision multi-steps in the selected zone. Moreover, we design a Hierarchical RL (HRL) strategy and auxiliary losses with curriculum learning to train the AZHP framework, which provides effective supervision signals for each stage. Extensive experiments demonstrate the superiority of our proposed method, which achieves state-of-the-art performance on three VLN benchmarks (REVERIE, SOON, R2R).


245
Iterative Vision-and-Language Navigation

Jacob Krantz · Shurjo Banerjee · Wang Zhu · Jason Corso · Peter Anderson · Stefan Lee · Jesse Thomason

We present Iterative Vision-and-Language Navigation (IVLN), a paradigm for evaluating language-guided agents navigating in a persistent environment over time. Existing Vision-and-Language Navigation (VLN) benchmarks erase the agent’s memory at the beginning of every episode, testing the ability to perform cold-start navigation with no prior information. However, deployed robots occupy the same environment for long periods of time. The IVLN paradigm addresses this disparity by training and evaluating VLN agents that maintain memory across tours of scenes that consist of up to 100 ordered instruction-following Room-to-Room (R2R) episodes, each defined by an individual language instruction and a target path. We present discrete and continuous Iterative Room-to-Room (IR2R) benchmarks comprising about 400 tours each in 80 indoor scenes. We find that extending the implicit memory of high-performing transformer VLN agents is not sufficient for IVLN, but agents that build maps can benefit from environment persistence, motivating a renewed focus on map-building agents in VLN.


246
EXCALIBUR: Encouraging and Evaluating Embodied Exploration

Hao Zhu · Raghav Kapoor · So Yeon Min · Winson Han · Jiatai Li · Kaiwen Geng · Graham Neubig · Yonatan Bisk · Aniruddha Kembhavi · Luca Weihs

Experience precedes understanding. Humans constantly explore and learn about their environment out of curiosity, gather information, and update their models of the world. On the other hand, machines are either trained to learn passively from static and fixed datasets, or taught to complete specific goal-conditioned tasks. To encourage the development of exploratory interactive agents, we present the EXCALIBUR benchmark. EXCALIBUR allows agents to explore their environment for long durations and then query their understanding of the physical world via inquiries like: “is the small heavy red bowl made from glass?” or “is there a silver spoon heavier than the egg?”. This design encourages agents to perform free-form home exploration without myopia induced by goal conditioning. Once the agents have answered a series of questions, they can renter the scene to refine their knowledge, update their beliefs, and improve their performance on the questions. Our experiments demonstrate the challenges posed by this dataset for the present-day state-of-the-art embodied systems and the headroom afforded to develop new innovative methods. Finally, we present a virtual reality interface that enables humans to seamlessly interact within the simulated world and use it to gather human performance measures. EXCALIBUR affords unique challenges in comparison to present-day benchmarks and represents the next frontier for embodied AI research.


247
Multimodal Prompting With Missing Modalities for Visual Recognition

Yi-Lun Lee · Yi-Hsuan Tsai · Wei-Chen Chiu · Chen-Yu Lee

In this paper, we tackle two challenges in multimodal learning for visual recognition: 1) when missing-modality occurs either during training or testing in real-world situations; and 2) when the computation resources are not available to finetune on heavy transformer models. To this end, we propose to utilize prompt learning and mitigate the above two challenges together. Specifically, our modality-missing-aware prompts can be plugged into multimodal transformers to handle general missing-modality cases, while only requiring less than 1% learnable parameters compared to training the entire model. We further explore the effect of different prompt configurations and analyze the robustness to missing modality. Extensive experiments are conducted to show the effectiveness of our prompt learning framework that improves the performance under various missing-modality cases, while alleviating the requirement of heavy model re-training. Code is available.


248
Award Candidate
Visual Programming: Compositional Visual Reasoning Without Training

Tanmay Gupta · Aniruddha Kembhavi

We present VISPROG, a neuro-symbolic approach to solving complex and compositional visual tasks given natural language instructions. VISPROG avoids the need for any task-specific training. Instead, it uses the in-context learning ability of large language models to generate python-like modular programs, which are then executed to get both the solution and a comprehensive and interpretable rationale. Each line of the generated program may invoke one of several off-the-shelf computer vision models, image processing routines, or python functions to produce intermediate outputs that may be consumed by subsequent parts of the program. We demonstrate the flexibility of VISPROG on 4 diverse tasks - compositional visual question answering, zero-shot reasoning on image pairs, factual knowledge object tagging, and language-guided image editing. We believe neuro-symbolic approaches like VISPROG are an exciting avenue to easily and effectively expand the scope of AI systems to serve the long tail of complex tasks that people may wish to perform.


249
Highlight
Super-CLEVR: A Virtual Benchmark To Diagnose Domain Robustness in Visual Reasoning

Zhuowan Li · Xingrui Wang · Elias Stengel-Eskin · Adam Kortylewski · Wufei Ma · Benjamin Van Durme · Alan L. Yuille

Visual Question Answering (VQA) models often perform poorly on out-of-distribution data and struggle on domain generalization. Due to the multi-modal nature of this task, multiple factors of variation are intertwined, making generalization difficult to analyze. This motivates us to introduce a virtual benchmark, Super-CLEVR, where different factors in VQA domain shifts can be isolated in order that their effects can be studied independently. Four factors are considered: visual complexity, question redundancy, concept distribution and concept compositionality. With controllably generated data, Super-CLEVR enables us to test VQA methods in situations where the test data differs from the training data along each of these axes. We study four existing methods, including two neural symbolic methods NSCL and NSVQA, and two non-symbolic methods FiLM and mDETR; and our proposed method, probabilistic NSVQA (P-NSVQA), which extends NSVQA with uncertainty reasoning. P-NSVQA outperforms other methods on three of the four domain shift factors. Our results suggest that disentangling reasoning and perception, combined with probabilistic uncertainty, form a strong VQA model that is more robust to domain shifts. The dataset and code are released at https://github.com/Lizw14/Super-CLEVR.


250
Prompting Large Language Models With Answer Heuristics for Knowledge-Based Visual Question Answering

Zhenwei Shao · Zhou Yu · Meng Wang · Jun Yu

Knowledge-based visual question answering (VQA) requires external knowledge beyond the image to answer the question. Early studies retrieve required knowledge from explicit knowledge bases (KBs), which often introduces irrelevant information to the question, hence restricting the performance of their models. Recent works have sought to use a large language model (i.e., GPT-3) as an implicit knowledge engine to acquire the necessary knowledge for answering. Despite the encouraging results achieved by these methods, we argue that they have not fully activated the capacity of GPT-3 as the provided input information is insufficient. In this paper, we present Prophet---a conceptually simple framework designed to prompt GPT-3 with answer heuristics for knowledge-based VQA. Specifically, we first train a vanilla VQA model on a specific knowledge-based VQA dataset without external knowledge. After that, we extract two types of complementary answer heuristics from the model: answer candidates and answer-aware examples. Finally, the two types of answer heuristics are encoded into the prompts to enable GPT-3 to better comprehend the task thus enhancing its capacity. Prophet significantly outperforms all existing state-of-the-art methods on two challenging knowledge-based VQA datasets, OK-VQA and A-OKVQA, delivering 61.1% and 55.7% accuracies on their testing sets, respectively.


251
À-La-Carte Prompt Tuning (APT): Combining Distinct Data via Composable Prompting

Benjamin Bowman · Alessandro Achille · Luca Zancato · Matthew Trager · Pramuditha Perera · Giovanni Paolini · Stefano Soatto

We introduce À-la-carte Prompt Tuning (APT), a transformer-based scheme to tune prompts on distinct data so that they can be arbitrarily composed at inference time. The individual prompts can be trained in isolation, possibly on different devices, at different times, and on different distributions or domains. Furthermore each prompt only contains information about the subset of data it was exposed to during training. During inference, models can be assembled based on arbitrary selections of data sources, which we call à-la-carte learning. À-la-carte learning enables constructing bespoke models specific to each user’s individual access rights and preferences. We can add or remove information from the model by simply adding or removing the corresponding prompts without retraining from scratch. We demonstrate that à-la-carte built models achieve accuracy within 5% of models trained on the union of the respective sources, with comparable cost in terms of training and inference time. For the continual learning benchmarks Split CIFAR-100 and CORe50, we achieve state-of-the-art performance.


252
ConStruct-VL: Data-Free Continual Structured VL Concepts Learning

James Seale Smith · Paola Cascante-Bonilla · Assaf Arbelle · Donghyun Kim · Rameswar Panda · David Cox · Diyi Yang · Zsolt Kira · Rogerio Feris · Leonid Karlinsky

Recently, large-scale pre-trained Vision-and-Language (VL) foundation models have demonstrated remarkable capabilities in many zero-shot downstream tasks, achieving competitive results for recognizing objects defined by as little as short text prompts. However, it has also been shown that VL models are still brittle in Structured VL Concept (SVLC) reasoning, such as the ability to recognize object attributes, states, and inter-object relations. This leads to reasoning mistakes, which need to be corrected as they occur by teaching VL models the missing SVLC skills; often this must be done using private data where the issue was found, which naturally leads to a data-free continual (no task-id) VL learning setting. In this work, we introduce the first Continual Data-Free Structured VL Concepts Learning (ConStruct-VL) benchmark and show it is challenging for many existing data-free CL strategies. We, therefore, propose a data-free method comprised of a new approach of Adversarial Pseudo-Replay (APR) which generates adversarial reminders of past tasks from past task models. To use this method efficiently, we also propose a continual parameter-efficient Layered-LoRA (LaLo) neural architecture allowing no-memory-cost access to all past models at train time. We show this approach outperforms all data-free methods by as much as ~ 7% while even matching some levels of experience-replay (prohibitive for applications where data-privacy must be preserved). Our code is publicly available at https://github.com/jamessealesmith/ConStruct-VL


253
Q: How To Specialize Large Vision-Language Models to Data-Scarce VQA Tasks? A: Self-Train on Unlabeled Images!

Zaid Khan · Vijay Kumar BG · Samuel Schulter · Xiang Yu · Yun Fu · Manmohan Chandraker

Finetuning a large vision language model (VLM) on a target dataset after large scale pretraining is a dominant paradigm in visual question answering (VQA). Datasets for specialized tasks such as knowledge-based VQA or VQA in non natural-image domains are orders of magnitude smaller than those for general-purpose VQA. While collecting additional labels for specialized tasks or domains can be challenging, unlabeled images are often available. We introduce SelTDA (Self-Taught Data Augmentation), a strategy for finetuning large VLMs on small-scale VQA datasets. SelTDA uses the VLM and target dataset to build a teacher model that can generate question-answer pseudolabels directly conditioned on an image alone, allowing us to pseudolabel unlabeled images. SelTDA then finetunes the initial VLM on the original dataset augmented with freshly pseudolabeled images. We describe a series of experiments showing that our self-taught data augmentation increases robustness to adversarially searched questions, counterfactual examples, and rephrasings, it improves domain generalization, and results in greater retention of numerical reasoning skills. The proposed strategy requires no additional annotations or architectural modifications, and is compatible with any modern encoder-decoder multimodal transformer. Code available at https://github.com/codezakh/SelTDA


254
Learning To Exploit Temporal Structure for Biomedical Vision–Language Processing

Shruthi Bannur · Stephanie Hyland · Qianchu Liu · Fernando Pérez-García · Maximilian Ilse · Daniel C. Castro · Benedikt Boecking · Harshita Sharma · Kenza Bouzid · Anja Thieme · Anton Schwaighofer · Maria Wetscherek · Matthew P. Lungren · Aditya Nori · Javier Alvarez-Valle · Ozan Oktay

Self-supervised learning in vision--language processing (VLP) exploits semantic alignment between imaging and text modalities. Prior work in biomedical VLP has mostly relied on the alignment of single image and report pairs even though clinical notes commonly refer to prior images. This does not only introduce poor alignment between the modalities but also a missed opportunity to exploit rich self-supervision through existing temporal content in the data. In this work, we explicitly account for prior images and reports when available during both training and fine-tuning. Our approach, named BioViL-T, uses a CNN--Transformer hybrid multi-image encoder trained jointly with a text model. It is designed to be versatile to arising challenges such as pose variations and missing input images across time. The resulting model excels on downstream tasks both in single- and multi-image setups, achieving state-of-the-art (SOTA) performance on (I) progression classification, (II) phrase grounding, and (III) report generation, whilst offering consistent improvements on disease classification and sentence-similarity tasks. We release a novel multi-modal temporal benchmark dataset, CXR-T, to quantify the quality of vision--language representations in terms of temporal semantics. Our experimental results show the significant advantages of incorporating prior images and reports to make most use of the data.


255
FashionSAP: Symbols and Attributes Prompt for Fine-Grained Fashion Vision-Language Pre-Training

Yunpeng Han · Lisai Zhang · Qingcai Chen · Zhijian Chen · Zhonghua Li · Jianxin Yang · Zhao Cao

Fashion vision-language pre-training models have shown efficacy for a wide range of downstream tasks. However, general vision-language pre-training models pay less attention to fine-grained domain features, while these features are important in distinguishing the specific domain tasks from general tasks. We propose a method for fine-grained fashion vision-language pre-training based on fashion Symbols and Attributes Prompt (FashionSAP) to model fine-grained multi-modalities fashion attributes and characteristics. Firstly, we propose the fashion symbols, a novel abstract fashion concept layer, to represent different fashion items and to generalize various kinds of fine-grained fashion features, making modelling fine-grained attributes more effective. Secondly, the attributes prompt method is proposed to make the model learn specific attributes of fashion items explicitly. We design proper prompt templates according to the format of fashion data. Comprehensive experiments are conducted on two public fashion benchmarks, i.e., FashionGen and FashionIQ, and FashionSAP gets SOTA performances for four popular fashion tasks. The ablation study also shows the proposed abstract fashion symbols, and the attribute prompt method enables the model to acquire fine-grained semantics in the fashion domain effectively. The obvious performance gains from FashionSAP provide a new baseline for future fashion task research.


256
Advancing Visual Grounding With Scene Knowledge: Benchmark and Method

Zhihong Chen · Ruifei Zhang · Yibing Song · Xiang Wan · Guanbin Li

Visual grounding (VG) aims to establish fine-grained alignment between vision and language. Ideally, it can be a testbed for vision-and-language models to evaluate their understanding of the images and texts and their reasoning abilities over their joint space. However, most existing VG datasets are constructed using simple description texts, which do not require sufficient reasoning over the images and texts. This has been demonstrated in a recent study, where a simple LSTM-based text encoder without pretraining can achieve state-of-the-art performance on mainstream VG datasets. Therefore, in this paper, we propose a novel benchmark of Scene Knowledge-guided Visual Grounding (SK-VG), where the image content and referring expressions are not sufficient to ground the target objects, forcing the models to have a reasoning ability on the long-form scene knowledge. To perform this task, we propose two approaches to accept the triple-type input, where the former embeds knowledge into the image features before the image-query interaction; the latter leverages linguistic structure to assist in computing the image-text matching. We conduct extensive experiments to analyze the above methods and show that the proposed approaches achieve promising results but still leave room for improvement, including performance and interpretability.


257
Beyond Appearance: A Semantic Controllable Self-Supervised Learning Framework for Human-Centric Visual Tasks

Weihua Chen · Xianzhe Xu · Jian Jia · Hao Luo · Yaohua Wang · Fan Wang · Rong Jin · Xiuyu Sun

Human-centric visual tasks have attracted increasing research attention due to their widespread applications. In this paper, we aim to learn a general human representation from massive unlabeled human images which can benefit downstream human-centric tasks to the maximum extent. We call this method SOLIDER, a Semantic cOntrollable seLf-supervIseD lEaRning framework. Unlike the existing self-supervised learning methods, prior knowledge from human images is utilized in SOLIDER to build pseudo semantic labels and import more semantic information into the learned representation. Meanwhile, we note that different downstream tasks always require different ratios of semantic information and appearance information. For example, human parsing requires more semantic information, while person re-identification needs more appearance information for identification purpose. So a single learned representation cannot fit for all requirements. To solve this problem, SOLIDER introduces a conditional network with a semantic controller. After the model is trained, users can send values to the controller to produce representations with different ratios of semantic information, which can fit different needs of downstream tasks. Finally, SOLIDER is verified on six downstream human-centric visual tasks. It outperforms state of the arts and builds new baselines for these tasks. The code is released in https://github.com/tinyvision/SOLIDER.


258
OCTET: Object-Aware Counterfactual Explanations

Mehdi Zemni · Mickaël Chen · Éloi Zablocki · Hédi Ben-Younes · Patrick Pérez · Matthieu Cord

Nowadays, deep vision models are being widely deployed in safety-critical applications, e.g., autonomous driving, and explainability of such models is becoming a pressing concern. Among explanation methods, counterfactual explanations aim to find minimal and interpretable changes to the input image that would also change the output of the model to be explained. Such explanations point end-users at the main factors that impact the decision of the model. However, previous methods struggle to explain decision models trained on images with many objects, e.g., urban scenes, which are more difficult to work with but also arguably more critical to explain. In this work, we propose to tackle this issue with an object-centric framework for counterfactual explanation generation. Our method, inspired by recent generative modeling works, encodes the query image into a latent space that is structured in a way to ease object-level manipulations. Doing so, it provides the end-user with control over which search directions (e.g., spatial displacement of objects, style modification, etc.) are to be explored during the counterfactual generation. We conduct a set of experiments on counterfactual explanation benchmarks for driving scenes, and we show that our method can be adapted beyond classification, e.g., to explain semantic segmentation models. To complete our analysis, we design and run a user study that measures the usefulness of counterfactual explanations in understanding a decision model. Code is available at https://github.com/valeoai/OCTET.


259
Local-Guided Global: Paired Similarity Representation for Visual Reinforcement Learning

Hyesong Choi · Hunsang Lee · Wonil Song · Sangryul Jeon · Kwanghoon Sohn · Dongbo Min

Recent vision-based reinforcement learning (RL) methods have found extracting high-level features from raw pixels with self-supervised learning to be effective in learning policies. However, these methods focus on learning global representations of images, and disregard local spatial structures present in the consecutively stacked frames. In this paper, we propose a novel approach, termed self-supervised Paired Similarity Representation Learning (PSRL) for effectively encoding spatial structures in an unsupervised manner. Given the input frames, the latent volumes are first generated individually using an encoder, and they are used to capture the variance in terms of local spatial structures, i.e., correspondence maps among multiple frames. This enables for providing plenty of fine-grained samples for training the encoder of deep RL. We further attempt to learn the global semantic representations in the global prediction module that predicts future state representations using action vector as a medium. The proposed method imposes similarity constraints on the three latent volumes; transformed query representations by estimated pixel-wise correspondence, predicted query representations from the global prediction model, and target representations of future state, guiding global prediction with locality-inherent volume. Experimental results on complex tasks in Atari Games and DeepMind Control Suite demonstrate that the RL methods are significantly boosted by the proposed self-supervised learning of structured representations.


260
Award Candidate
What Can Human Sketches Do for Object Detection?

Pinaki Nath Chowdhury · Ayan Kumar Bhunia · Aneeshan Sain · Subhadeep Koley · Tao Xiang · Yi-Zhe Song

Sketches are highly expressive, inherently capturing subjective and fine-grained visual cues. The exploration of such innate properties of human sketches has, however, been limited to that of image retrieval. In this paper, for the first time, we cultivate the expressiveness of sketches but for the fundamental vision task of object detection. The end result is a sketch-enabled object detection framework that detects based on what you sketch -- that “zebra” (e.g., one that is eating the grass) in a herd of zebras (instance-aware detection), and only the part (e.g., “head” of a “zebra”) that you desire (part-aware detection). We further dictate that our model works without (i) knowing which category to expect at testing (zero-shot) and (ii) not requiring additional bounding boxes (as per fully supervised) and class labels (as per weakly supervised). Instead of devising a model from the ground up, we show an intuitive synergy between foundation models (e.g., CLIP) and existing sketch models build for sketch-based image retrieval (SBIR), which can already elegantly solve the task -- CLIP to provide model generalisation, and SBIR to bridge the (sketch->photo) gap. In particular, we first perform independent prompting on both sketch and photo branches of an SBIR model to build highly generalisable sketch and photo encoders on the back of the generalisation ability of CLIP. We then devise a training paradigm to adapt the learned encoders for object detection, such that the region embeddings of detected boxes are aligned with the sketch and photo embeddings from SBIR. Evaluating our framework on standard object detection datasets like PASCAL-VOC and MS-COCO outperforms both supervised (SOD) and weakly-supervised object detectors (WSOD) on zero-shot setups. Project Page: https://pinakinathc.github.io/sketch-detect


261
Revisiting Multimodal Representation in Contrastive Learning: From Patch and Token Embeddings to Finite Discrete Tokens

Yuxiao Chen · Jianbo Yuan · Yu Tian · Shijie Geng · Xinyu Li · Ding Zhou · Dimitris N. Metaxas · Hongxia Yang

Contrastive learning-based vision-language pre-training approaches, such as CLIP, have demonstrated great success in many vision-language tasks. These methods achieve cross-modal alignment by encoding a matched image-text pair with similar feature embeddings, which are generated by aggregating information from visual patches and language tokens. However, direct aligning cross-modal information using such representations is challenging, as visual patches and text tokens differ in semantic levels and granularities. To alleviate this issue, we propose a Finite Discrete Tokens (FDT) based multimodal representation. FDT is a set of learnable tokens representing certain visual-semantic concepts. Both images and texts are embedded using shared FDT by first grounding multimodal inputs to FDT space and then aggregating the activated FDT representations. The matched visual and semantic concepts are enforced to be represented by the same set of discrete tokens by a sparse activation constraint. As a result, the granularity gap between the two modalities is reduced. Through both quantitative and qualitative analyses, we demonstrate that using FDT representations in CLIP-style models improves cross-modal alignment and performance in visual recognition and vision-language downstream tasks. Furthermore, we show that our method can learn more comprehensive representations, and the learned FDT capture meaningful cross-modal correspondence, ranging from objects to actions and attributes.


262
Correlational Image Modeling for Self-Supervised Visual Pre-Training

Wei Li · Jiahao Xie · Chen Change Loy

We introduce Correlational Image Modeling (CIM), a novel but surprisingly effective approach to self-supervised visual pre-training. Our CIM performs a simple pretext task: we randomly crop image regions (exemplar) from an input image (context) and predict correlation maps between the exemplars and the context. Three key designs enable correlational image modeling as a nontrivial and meaningful self-supervisory task. First, to generate useful exemplar-context pairs, we consider cropping image regions with various scales, shapes, rotations, and transformations. Second, we employ a bootstrap learning framework that involves online and target networks. During pre-training, the former takes exemplars as inputs while the latter converts the context. Third, we model the output correlation maps via a simple cross-attention block, within which the context serves as queries and the exemplars offer values and keys. We show that CIM performs on par or better than the current state of the art on self-supervised and transfer benchmarks.


263
Generalized Decoding for Pixel, Image, and Language

Xueyan Zou · Zi-Yi Dou · Jianwei Yang · Zhe Gan · Linjie Li · Chunyuan Li · Xiyang Dai · Harkirat Behl · Jianfeng Wang · Lu Yuan · Nanyun Peng · Lijuan Wang · Yong Jae Lee · Jianfeng Gao

We present X-Decoder, a generalized decoding model that can predict pixel-level segmentation and language tokens seamlessly. X-Decoder takes as input two types of queries: (i) generic non-semantic queries and (ii) semantic queries induced from text inputs, to decode different pixel-level and token-level outputs in the same semantic space. With such a novel design, X-Decoder is the first work that provides a unified way to support all types of image segmentation and a variety of vision-language (VL) tasks. Further, our design enables seamless interactions across tasks at different granularities and brings mutual benefits by learning a common and rich pixel-level visual-semantic understanding space, without any pseudo-labeling. After pretraining on a mixed set of a limited amount of segmentation data and millions of image-text pairs, X-Decoder exhibits strong transferability to a wide range of downstream tasks in both zero-shot and finetuning settings. Notably, it achieves (1) state-of-the-art results on open-vocabulary segmentation and referring segmentation on eight datasets; (2) better or competitive finetuned performance to other generalist and specialist models on segmentation and VL tasks; and (3) flexibility for efficient finetuning and novel task composition. Code, demo, video and visualization are available at: https://x-decoder-vl.github.io.


264
Towards Modality-Agnostic Person Re-Identification With Descriptive Query

Cuiqun Chen · Mang Ye · Ding Jiang

Person re-identification (ReID) with descriptive query (text or sketch) provides an important supplement for general image-image paradigms, which is usually studied in a single cross-modality matching manner, e.g., text-to-image or sketch-to-photo. However, without a camera-captured photo query, it is uncertain whether the text or sketch is available or not in practical scenarios. This motivates us to study a new and challenging modality-agnostic person re-identification problem. Towards this goal, we propose a unified person re-identification (UNIReID) architecture that can effectively adapt to cross-modality and multi-modality tasks. Specifically, UNIReID incorporates a simple dual-encoder with task-specific modality learning to mine and fuse visual and textual modality information. To deal with the imbalanced training problem of different tasks in UNIReID, we propose a task-aware dynamic training strategy in terms of task difficulty, adaptively adjusting the training focus. Besides, we construct three multi-modal ReID datasets by collecting the corresponding sketches from photos to support this challenging task. The experimental results on three multi-modal ReID datasets show that our UNIReID greatly improves the retrieval accuracy and generalization ability on different tasks and unseen scenarios.


265
M6Doc: A Large-Scale Multi-Format, Multi-Type, Multi-Layout, Multi-Language, Multi-Annotation Category Dataset for Modern Document Layout Analysis

Hiuyi Cheng · Peirong Zhang · Sihang Wu · Jiaxin Zhang · Qiyuan Zhu · Zecheng Xie · Jing Li · Kai Ding · Lianwen Jin

Document layout analysis is a crucial prerequisite for document understanding, including document retrieval and conversion. Most public datasets currently contain only PDF documents and lack realistic documents. Models trained on these datasets may not generalize well to real-world scenarios. Therefore, this paper introduces a large and diverse document layout analysis dataset called M^6-Doc. The M^6 designation represents six properties: (1) Multi-Format (including scanned, photographed, and PDF documents); (2) Multi-Type (such as scientific articles, textbooks, books, test papers, magazines, newspapers, and notes); (3) Multi-Layout (rectangular, Manhattan, non-Manhattan, and multi-column Manhattan); (4) Multi-Language (Chinese and English); (5) Multi-Annotation Category (74 types of annotation labels with 237,116 annotation instances in 9,080 manually annotated pages); and (6) Modern documents. Additionally, we propose a transformer-based document layout analysis method called TransDLANet, which leverages an adaptive element matching mechanism that enables query embedding to better match ground truth to improve recall, and constructs a segmentation branch for more precise document image instance segmentation. We conduct a comprehensive evaluation of M^6-Doc with various layout analysis methods and demonstrate its effectiveness. TransDLANet achieves state-of-the-art performance on M^6-Doc with 64.5% mAP. The M^6-Doc dataset will be available at https://github.com/HCIILAB/M6Doc.


266
Highlight
Learning Customized Visual Models With Retrieval-Augmented Knowledge

Haotian Liu · Kilho Son · Jianwei Yang · Ce Liu · Jianfeng Gao · Yong Jae Lee · Chunyuan Li

Image-text contrastive learning models such as CLIP have demonstrated strong task transfer ability. The high generality and usability of these visual models is achieved via a web-scale data collection process to ensure broad concept coverage, followed by expensive pre-training to feed all the knowledge into model weights. Alternatively, we propose REACT, REtrieval-Augmented CusTomization, a framework to acquire the relevant web knowledge to build customized visual models for target domains. We retrieve the most relevant image-text pairs (~3% of CLIP pre-training data) from the web-scale database as external knowledge and propose to customize the model by only training new modularized blocks while freezing all the original weights. The effectiveness of REACT is demonstrated via extensive experiments on classification, retrieval, detection and segmentation tasks, including zero, few, and full-shot settings. Particularly, on the zero-shot classification task, compared with CLIP, it achieves up to 5.4% improvement on ImageNet and 3.7% on the ELEVATER benchmark (20 datasets).


267
Learning Semantic Relationship Among Instances for Image-Text Matching

Zheren Fu · Zhendong Mao · Yan Song · Yongdong Zhang

Image-text matching, a bridge connecting image and language, is an important task, which generally learns a holistic cross-modal embedding to achieve a high-quality semantic alignment between the two modalities. However, previous studies only focus on capturing fragment-level relation within a sample from a particular modality, e.g., salient regions in an image or text words in a sentence, where they usually pay less attention to capturing instance-level interactions among samples and modalities, e.g., multiple images and texts. In this paper, we argue that sample relations could help learn subtle differences for hard negative instances, and thus transfer shared knowledge for infrequent samples should be promising in obtaining better holistic embeddings. Therefore, we propose a novel hierarchical relation modeling framework (HREM), which explicitly capture both fragment- and instance-level relations to learn discriminative and robust cross-modal embeddings. Extensive experiments on Flickr30K and MS-COCO show our proposed method outperforms the state-of-the-art ones by 4%-10% in terms of rSum.


268
Highlight
I2MVFormer: Large Language Model Generated Multi-View Document Supervision for Zero-Shot Image Classification

Muhammad Ferjad Naeem · Muhammad Gul Zain Ali Khan · Yongqin Xian · Muhammad Zeshan Afzal · Didier Stricker · Luc Van Gool · Federico Tombari

Recent works have shown that unstructured text (documents) from online sources can serve as useful auxiliary information for zero-shot image classification. However, these methods require access to a high-quality source like Wikipedia and are limited to a single source of information. Large Language Models (LLM) trained on web-scale text show impressive abilities to repurpose their learned knowledge for a multitude of tasks. In this work, we provide a novel perspective on using an LLM to provide text supervision for a zero-shot image classification model. The LLM is provided with a few text descriptions from different annotators as examples. The LLM is conditioned on these examples to generate multiple text descriptions for each class (referred to as views). Our proposed model, I2MVFormer, learns multi-view semantic embeddings for zero-shot image classification with these class views. We show that each text view of a class provides complementary information allowing a model to learn a highly discriminative class embedding. Moreover, we show that I2MVFormer is better at consuming the multi-view text supervision from LLM compared to baseline models. I2MVFormer establishes a new state-of-the-art on three public benchmark datasets for zero-shot image classification with unsupervised semantic embeddings.


269
Highlight
ImageBind: One Embedding Space To Bind Them All

Rohit Girdhar · Alaaeldin El-Nouby · Zhuang Liu · Mannat Singh · Kalyan Vasudev Alwala · Armand Joulin · Ishan Misra

We present ImageBind, an approach to learn a joint embedding across six different modalities - images, text, audio, depth, thermal, and IMU data. We show that all combinations of paired data are not necessary to train such a joint embedding, and only image-paired data is sufficient to bind the modalities together. ImageBind can leverage recent large scale vision-language models, and extends their zero-shot capabilities to new modalities just by using their natural pairing with images. It enables novel emergent applications ‘out-of-the-box’ including cross-modal retrieval, composing modalities with arithmetic, cross-modal detection and generation. The emergent capabilities improve with the strength of the image encoder and we set a new state-of-the-art on emergent zero-shot recognition tasks across modalities, outperforming specialist supervised models. Finally, we show strong few-shot recognition results outperforming prior work, and that ImageBind serves as a new way to evaluate vision models for visual and non-visual tasks.


270
Model-Agnostic Gender Debiased Image Captioning

Yusuke Hirota · Yuta Nakashima · Noa Garcia

Image captioning models are known to perpetuate and amplify harmful societal bias in the training set. In this work, we aim to mitigate such gender bias in image captioning models. While prior work has addressed this problem by forcing models to focus on people to reduce gender misclassification, it conversely generates gender-stereotypical words at the expense of predicting the correct gender. From this observation, we hypothesize that there are two types of gender bias affecting image captioning models: 1) bias that exploits context to predict gender, and 2) bias in the probability of generating certain (often stereotypical) words because of gender. To mitigate both types of gender biases, we propose a framework, called LIBRA, that learns from synthetically biased samples to decrease both types of biases, correcting gender misclassification and changing gender-stereotypical words to more neutral ones.


271
Boundary-Aware Backward-Compatible Representation via Adversarial Learning in Image Retrieval

Tan Pan · Furong Xu · Xudong Yang · Sifeng He · Chen Jiang · Qingpei Guo · Feng Qian · Xiaobo Zhang · Yuan Cheng · Lei Yang · Wei Chu

Image retrieval plays an important role in the Internet world. Usually, the core parts of mainstream visual retrieval systems include an online service of the embedding model and a large-scale vector database. For traditional model upgrades, the old model will not be replaced by the new one until the embeddings of all the images in the database are re-computed by the new model, which takes days or weeks for a large amount of data. Recently, backward-compatible training (BCT) enables the new model to be immediately deployed online by making the new embeddings directly comparable to the old ones. For BCT, improving the compatibility of two models with less negative impact on retrieval performance is the key challenge. In this paper, we introduce AdvBCT, an Adversarial Backward-Compatible Training method with an elastic boundary constraint that takes both compatibility and discrimination into consideration. We first employ adversarial learning to minimize the distribution disparity between embeddings of the new model and the old model. Meanwhile, we add an elastic boundary constraint during training to improve compatibility and discrimination efficiently. Extensive experiments on GLDv2, Revisited Oxford (ROxford), and Revisited Paris (RParis) demonstrate that our method outperforms other BCT methods on both compatibility and discrimination. The implementation of AdvBCT will be publicly available at https://github.com/Ashespt/AdvBCT.


272
Prompt, Generate, Then Cache: Cascade of Foundation Models Makes Strong Few-Shot Learners

Renrui Zhang · Xiangfei Hu · Bohao Li · Siyuan Huang · Hanqiu Deng · Yu Qiao · Peng Gao · Hongsheng Li

Visual recognition in low-data regimes requires deep neural networks to learn generalized representations from limited training samples. Recently, CLIP-based methods have shown promising few-shot performance benefited from the contrastive language-image pre-training. We then question, if the more diverse pre-training knowledge can be cascaded to further assist few-shot representation learning. In this paper, we propose CaFo, a Cascade of Foundation models that incorporates diverse prior knowledge of various pre training paradigms for better few-shot learning. Our CaFo incorporates CLIP’s language-contrastive knowledge, DINO’s vision-contrastive knowledge, DALL-E’s vision generative knowledge, and GPT-3’s language-generative knowledge. Specifically, CaFo works by ‘Prompt, Generate, then Cache’. Firstly, we leverage GPT-3 to produce textual inputs for prompting CLIP with rich downstream linguistic semantics. Then, we generate synthetic images via DALL-E to expand the few-shot training data without any manpower. At last, we introduce a learnable cache model to adaptively blend the predictions from CLIP and DINO. By such col laboration, CaFo can fully unleash the potential of different pre-training methods and unify them to perform state-of the-art for few-shot classification. Code is available at https://github.com/ZrrSkywalker/CaFo.


273
Towards Unified Scene Text Spotting Based on Sequence Generation

Taeho Kil · Seonghyeon Kim · Sukmin Seo · Yoonsik Kim · Daehee Kim

Sequence generation models have recently made significant progress in unifying various vision tasks. Although some auto-regressive models have demonstrated promising results in end-to-end text spotting, they use specific detection formats while ignoring various text shapes and are limited in the maximum number of text instances that can be detected. To overcome these limitations, we propose a UNIfied scene Text Spotter, called UNITS. Our model unifies various detection formats, including quadrilaterals and polygons, allowing it to detect text in arbitrary shapes. Additionally, we apply starting-point prompting to enable the model to extract texts from an arbitrary starting point, thereby extracting more texts beyond the number of instances it was trained on. Experimental results demonstrate that our method achieves competitive performance compared to state-of-the-art methods. Further analysis shows that UNITS can extract a larger number of texts than it was trained on. We provide the code for our method at https://github.com/clovaai/units.


274
CapDet: Unifying Dense Captioning and Open-World Detection Pretraining

Yanxin Long · Youpeng Wen · Jianhua Han · Hang Xu · Pengzhen Ren · Wei Zhang · Shen Zhao · Xiaodan Liang

Benefiting from large-scale vision-language pre-training on image-text pairs, open-world detection methods have shown superior generalization ability under the zero-shot or few-shot detection settings. However, a pre-defined category space is still required during the inference stage of existing methods and only the objects belonging to that space will be predicted. To introduce a “real” open-world detector, in this paper, we propose a novel method named CapDet to either predict under a given category list or directly generate the category of predicted bounding boxes. Specifically, we unify the open-world detection and dense caption tasks into a single yet effective framework by introducing an additional dense captioning head to generate the region-grounded captions. Besides, adding the captioning task will in turn benefit the generalization of detection performance since the captioning dataset covers more concepts. Experiment results show that by unifying the dense caption task, our CapDet has obtained significant performance improvements (e.g., +2.1% mAP on LVIS rare classes) over the baseline method on LVIS (1203 classes). Besides, our CapDet also achieves state-of-the-art performance on dense captioning tasks, e.g., 15.44% mAP on VG V1.2 and 13.98% on the VG-COCO dataset.


275
CLIP2: Contrastive Language-Image-Point Pretraining From Real-World Point Cloud Data

Yihan Zeng · Chenhan Jiang · Jiageng Mao · Jianhua Han · Chaoqiang Ye · Qingqiu Huang · Dit-Yan Yeung · Zhen Yang · Xiaodan Liang · Hang Xu

Contrastive Language-Image Pre-training, benefiting from large-scale unlabeled text-image pairs, has demonstrated great performance in open-world vision understanding tasks. However, due to the limited Text-3D data pairs, adapting the success of 2D Vision-Language Models (VLM) to the 3D space remains an open problem. Existing works that leverage VLM for 3D understanding generally resort to constructing intermediate 2D representations for the 3D data, but at the cost of losing 3D geometry information. To take a step toward open-world 3D vision understanding, we propose Contrastive Language-Image-Point Cloud Pretraining (CLIP^2) to directly learn the transferable 3D point cloud representation in realistic scenarios with a novel proxy alignment mechanism. Specifically, we exploit naturally-existed correspondences in 2D and 3D scenarios, and build well-aligned and instance-based text-image-point proxies from those complex scenarios. On top of that, we propose a cross-modal contrastive objective to learn semantic and instance-level aligned point cloud representation. Experimental results on both indoor and outdoor scenarios show that our learned 3D representation has great transfer ability in downstream tasks, including zero-shot and few-shot 3D recognition, which boosts the state-of-the-art methods by large margins. Furthermore, we provide analyses of the capability of different representations in real scenarios and present the optional ensemble scheme.


276
Aligning Bag of Regions for Open-Vocabulary Object Detection

Size Wu · Wenwei Zhang · Sheng Jin · Wentao Liu · Chen Change Loy

Pre-trained vision-language models (VLMs) learn to align vision and language representations on large-scale datasets, where each image-text pair usually contains a bag of semantic concepts. However, existing open-vocabulary object detectors only align region embeddings individually with the corresponding features extracted from the VLMs. Such a design leaves the compositional structure of semantic concepts in a scene under-exploited, although the structure may be implicitly learned by the VLMs. In this work, we propose to align the embedding of bag of regions beyond individual regions. The proposed method groups contextually interrelated regions as a bag. The embeddings of regions in a bag are treated as embeddings of words in a sentence, and they are sent to the text encoder of a VLM to obtain the bag-of-regions embedding, which is learned to be aligned to the corresponding features extracted by a frozen VLM. Applied to the commonly used Faster R-CNN, our approach surpasses the previous best results by 4.6 box AP 50 and 2.8 mask AP on novel categories of open-vocabulary COCO and LVIS benchmarks, respectively. Code and models are available at https://github.com/wusize/ovdet.


277
Visual Recognition by Request

Chufeng Tang · Lingxi Xie · Xiaopeng Zhang · Xiaolin Hu · Qi Tian

Humans have the ability of recognizing visual semantics in an unlimited granularity, but existing visual recognition algorithms cannot achieve this goal. In this paper, we establish a new paradigm named visual recognition by request (ViRReq) to bridge the gap. The key lies in decomposing visual recognition into atomic tasks named requests and leveraging a knowledge base, a hierarchical and text-based dictionary, to assist task definition. ViRReq allows for (i) learning complicated whole-part hierarchies from highly incomplete annotations and (ii) inserting new concepts with minimal efforts. We also establish a solid baseline by integrating language-driven recognition into recent semantic and instance segmentation methods, and demonstrate its flexible recognition ability on CPP and ADE20K, two datasets with hierarchical whole-part annotations.


278
Category Query Learning for Human-Object Interaction Classification

Chi Xie · Fangao Zeng · Yue Hu · Shuang Liang · Yichen Wei

Unlike most previous HOI methods that focus on learning better human-object features, we propose a novel and complementary approach called category query learning. Such queries are explicitly associated to interaction categories, converted to image specific category representation via a transformer decoder, and learnt via an auxiliary image-level classification task. This idea is motivated by an earlier multi-label image classification method, but is for the first time applied for the challenging human-object interaction classification task. Our method is simple, general and effective. It is validated on three representative HOI baselines and achieves new state-of-the-art results on two benchmarks.


279
Self-Supervised Implicit Glyph Attention for Text Recognition

Tongkun Guan · Chaochen Gu · Jingzheng Tu · Xue Yang · Qi Feng · Yudi Zhao · Wei Shen

The attention mechanism has become the de facto module in scene text recognition (STR) methods, due to its capability of extracting character-level representations. These methods can be summarized into implicit attention based and supervised attention based, depended on how the attention is computed, i.e., implicit attention and supervised attention are learned from sequence-level text annotations and character-level bounding box annotations, respectively. Implicit attention, as it may extract coarse or even incorrect spatial regions as character attention, is prone to suffering from an alignment-drifted issue. Supervised attention can alleviate the above issue, but it is category-specific, which requires extra laborious character-level bounding box annotations and would be memory-intensive when the number of character categories is large. To address the aforementioned issues, we propose a novel attention mechanism for STR, self-supervised implicit glyph attention (SIGA). SIGA delineates the glyph structures of text images by jointly self-supervised text segmentation and implicit attention alignment, which serve as the supervision to improve attention correctness without extra character-level annotations. Experimental results demonstrate that SIGA performs consistently and significantly better than previous attention-based STR methods, in terms of both attention correctness and final recognition performance on publicly available context benchmarks and our contributed contextless benchmarks.


280
Enlarging Instance-Specific and Class-Specific Information for Open-Set Action Recognition

Jun Cen · Shiwei Zhang · Xiang Wang · Yixuan Pei · Zhiwu Qing · Yingya Zhang · Qifeng Chen

Open-set action recognition is to reject unknown human action cases which are out of the distribution of the training set. Existing methods mainly focus on learning better uncertainty scores but dismiss the importance of feature representations. We find that features with richer semantic diversity can significantly improve the open-set performance under the same uncertainty scores. In this paper, we begin with analyzing the feature representation behavior in the open-set action recognition (OSAR) problem based on the information bottleneck (IB) theory, and propose to enlarge the instance-specific (IS) and class-specific (CS) information contained in the feature for better performance. To this end, a novel Prototypical Similarity Learning (PSL) framework is proposed to keep the instance variance within the same class to retain more IS information. Besides, we notice that unknown samples sharing similar appearances to known samples are easily misclassified as known classes. To alleviate this issue, video shuffling is further introduced in our PSL to learn distinct temporal information between original and shuffled samples, which we find enlarges the CS information. Extensive experiments demonstrate that the proposed PSL can significantly boost both the open-set and closed-set performance and achieves state-of-the-art results on multiple benchmarks. Code is available at https://github.com/Jun-CEN/PSL.


281
CLIP Is Also an Efficient Segmenter: A Text-Driven Approach for Weakly Supervised Semantic Segmentation

Yuqi Lin · Minghao Chen · Wenxiao Wang · Boxi Wu · Ke Li · Binbin Lin · Haifeng Liu · Xiaofei He

Weakly supervised semantic segmentation (WSSS) with image-level labels is a challenging task. Mainstream approaches follow a multi-stage framework and suffer from high training costs. In this paper, we explore the potential of Contrastive Language-Image Pre-training models (CLIP) to localize different categories with only image-level labels and without further training. To efficiently generate high-quality segmentation masks from CLIP, we propose a novel WSSS framework called CLIP-ES. Our framework improves all three stages of WSSS with special designs for CLIP: 1) We introduce the softmax function into GradCAM and exploit the zero-shot ability of CLIP to suppress the confusion caused by non-target classes and backgrounds. Meanwhile, to take full advantage of CLIP, we re-explore text inputs under the WSSS setting and customize two text-driven strategies: sharpness-based prompt selection and synonym fusion. 2) To simplify the stage of CAM refinement, we propose a real-time class-aware attention-based affinity (CAA) module based on the inherent multi-head self-attention (MHSA) in CLIP-ViTs. 3) When training the final segmentation model with the masks generated by CLIP, we introduced a confidence-guided loss (CGL) focus on confident regions. Our CLIP-ES achieves SOTA performance on Pascal VOC 2012 and MS COCO 2014 while only taking 10% time of previous methods for the pseudo mask generation. Code is available at https://github.com/linyq2117/CLIP-ES.


282
Learning Attention As Disentangler for Compositional Zero-Shot Learning

Shaozhe Hao · Kai Han · Kwan-Yee K. Wong

Compositional zero-shot learning (CZSL) aims at learning visual concepts (i.e., attributes and objects) from seen compositions and combining concept knowledge into unseen compositions. The key to CZSL is learning the disentanglement of the attribute-object composition. To this end, we propose to exploit cross-attentions as compositional disentanglers to learn disentangled concept embeddings. For example, if we want to recognize an unseen composition “yellow flower”, we can learn the attribute concept “yellow” and object concept “flower” from different yellow objects and different flowers respectively. To further constrain the disentanglers to learn the concept of interest, we employ a regularization at the attention level. Specifically, we adapt the earth mover’s distance (EMD) as a feature similarity metric in the cross-attention module. Moreover, benefiting from concept disentanglement, we improve the inference process and tune the prediction score by combining multiple concept probabilities. Comprehensive experiments on three CZSL benchmark datasets demonstrate that our method significantly outperforms previous works in both closed- and open-world settings, establishing a new state-of-the-art. Project page: https://haoosz.github.io/ade-czsl/


283
Universal Instance Perception As Object Discovery and Retrieval

Bin Yan · Yi Jiang · Jiannan Wu · Dong Wang · Ping Luo · Zehuan Yuan · Huchuan Lu

All instance perception tasks aim at finding certain objects specified by some queries such as category names, language expressions, and target annotations, but this complete field has been split into multiple independent subtasks. In this work, we present a universal instance perception model of the next generation, termed UNINEXT. UNINEXT reformulates diverse instance perception tasks into a unified object discovery and retrieval paradigm and can flexibly perceive different types of objects by simply changing the input prompts. This unified formulation brings the following benefits: (1) enormous data from different tasks and label vocabularies can be exploited for jointly training general instance-level representations, which is especially beneficial for tasks lacking in training data. (2) the unified model is parameter-efficient and can save redundant computation when handling multiple tasks simultaneously. UNINEXT shows superior performance on 20 challenging benchmarks from 10 instance-level tasks including classical image-level tasks (object detection and instance segmentation), vision-and-language tasks (referring expression comprehension and segmentation), and six video-level object tracking tasks. Code is available at https://github.com/MasterBin-IIAU/UNINEXT.


284
Highlight
Progressive Semantic-Visual Mutual Adaption for Generalized Zero-Shot Learning

Man Liu · Feng Li · Chunjie Zhang · Yunchao Wei · Huihui Bai · Yao Zhao

Generalized Zero-Shot Learning (GZSL) identifies unseen categories by knowledge transferred from the seen domain, relying on the intrinsic interactions between visual and semantic information. Prior works mainly localize regions corresponding to the sharing attributes. When various visual appearances correspond to the same attribute, the sharing attributes inevitably introduce semantic ambiguity, hampering the exploration of accurate semantic-visual interactions. In this paper, we deploy the dual semantic-visual transformer module (DSVTM) to progressively model the correspondences between attribute prototypes and visual features, constituting a progressive semantic-visual mutual adaption (PSVMA) network for semantic disambiguation and knowledge transferability improvement. Specifically, DSVTM devises an instance-motivated semantic encoder that learns instance-centric prototypes to adapt to different images, enabling the recast of the unmatched semantic-visual pair into the matched one. Then, a semantic-motivated instance decoder strengthens accurate cross-domain interactions between the matched pair for semantic-related instance adaption, encouraging the generation of unambiguous visual representations. Moreover, to mitigate the bias towards seen classes in GZSL, a debiasing loss is proposed to pursue response consistency between seen and unseen predictions. The PSVMA consistently yields superior performances against other state-of-the-art methods. Code will be available at: https://github.com/ManLiuCoder/PSVMA.


285
DPF: Learning Dense Prediction Fields With Weak Supervision

Xiaoxue Chen · Yuhang Zheng · Yupeng Zheng · Qiang Zhou · Hao Zhao · Guyue Zhou · Ya-Qin Zhang

Nowadays, many visual scene understanding problems are addressed by dense prediction networks. But pixel-wise dense annotations are very expensive (e.g., for scene parsing) or impossible (e.g., for intrinsic image decomposition), motivating us to leverage cheap point-level weak supervision. However, existing pointly-supervised methods still use the same architecture designed for full supervision. In stark contrast to them, we propose a new paradigm that makes predictions for point coordinate queries, as inspired by the recent success of implicit representations, like distance or radiance fields. As such, the method is named as dense prediction fields (DPFs). DPFs generate expressive intermediate features for continuous sub-pixel locations, thus allowing outputs of an arbitrary resolution. DPFs are naturally compatible with point-level supervision. We showcase the effectiveness of DPFs using two substantially different tasks: high-level semantic parsing and low-level intrinsic image decomposition. In these two cases, supervision comes in the form of single-point semantic category and two-point relative reflectance, respectively. As benchmarked by three large-scale public datasets PascalContext, ADE20k and IIW, DPFs set new state-of-the-art performance on all of them with significant margins. Code can be accessed at https://github.com/cxx226/DPF.


286
Modeling Entities As Semantic Points for Visual Information Extraction in the Wild

Zhibo Yang · Rujiao Long · Pengfei Wang · Sibo Song · Humen Zhong · Wenqing Cheng · Xiang Bai · Cong Yao

Recently, Visual Information Extraction (VIE) has been becoming increasingly important in both academia and industry, due to the wide range of real-world applications. Previously, numerous works have been proposed to tackle this problem. However, the benchmarks used to assess these methods are relatively plain, i.e., scenarios with real-world complexity are not fully represented in these benchmarks. As the first contribution of this work, we curate and release a new dataset for VIE, in which the document images are much more challenging in that they are taken from real applications, and difficulties such as blur, partial occlusion, and printing shift are quite common. All these factors may lead to failures in information extraction. Therefore, as the second contribution, we explore an alternative approach to precisely and robustly extract key information from document images under such tough conditions. Specifically, in contrast to previous methods, which usually either incorporate visual information into a multi-modal architecture or train text spotting and information extraction in an end-to-end fashion, we explicitly model entities as semantic points, i.e., center points of entities are enriched with semantic information describing the attributes and relationships of different entities, which could largely benefit entity labeling and linking. Extensive experiments on standard benchmarks in this field as well as the proposed dataset demonstrate that the proposed method can achieve significantly enhanced performance on entity labeling and linking, compared with previous state-of-the-art models.


287
GeoNet: Benchmarking Unsupervised Adaptation Across Geographies

Tarun Kalluri · Wangdong Xu · Manmohan Chandraker

In recent years, several efforts have been aimed at improving the robustness of vision models to domains and environments unseen during training. An important practical problem pertains to models deployed in a new geography that is under-represented in the training dataset, posing a direct challenge to fair and inclusive computer vision. In this paper, we study the problem of geographic robustness and make three main contributions. First, we introduce a large-scale dataset GeoNet for geographic adaptation containing benchmarks across diverse tasks like scene recognition (GeoPlaces), image classification (GeoImNet) and universal adaptation (GeoUniDA). Second, we investigate the nature of distribution shifts typical to the problem of geographic adaptation and hypothesize that the major source of domain shifts arise from significant variations in scene context (context shift), object design (design shift) and label distribution (prior shift) across geographies. Third, we conduct an extensive evaluation of several state-of-the-art unsupervised domain adaptation algorithms and architectures on GeoNet, showing that they do not suffice for geographical adaptation, and that large-scale pre-training using large vision models also does not lead to geographic robustness. Our dataset is publicly available at https://tarun005.github.io/GeoNet.


288
SegLoc: Learning Segmentation-Based Representations for Privacy-Preserving Visual Localization

Maxime Pietrantoni · Martin Humenberger · Torsten Sattler · Gabriela Csurka

Inspired by properties of semantic segmentation, in this paper we investigate how to leverage robust image segmentation in the context of privacy-preserving visual localization. We propose a new localization framework, SegLoc, that leverages image segmentation to create robust, compact, and privacy-preserving scene representations, i.e., 3D maps. We build upon the correspondence-supervised, fine-grained segmentation approach from Larsson et al (ICCV’19), making it more robust by learning a set of cluster labels with discriminative clustering, additional consistency regularization terms and we jointly learn a global image representation along with a dense local representation. In our localization pipeline, the former will be used for retrieving the most similar images, the latter to refine the retrieved poses by minimizing the label inconsistency between the 3D points of the map and their projection onto the query image. In various experiments, we show that our proposed representation allows to achieve (close-to) state-of-the-art pose estimation results while only using a compact 3D map that does not contain enough information about the original images for an attacker to reconstruct personal information.


289
Towards Open-World Segmentation of Parts

Tai-Yu Pan · Qing Liu · Wei-Lun Chao · Brian Price

Segmenting object parts such as cup handles and animal bodies is important in many real-world applications but requires more annotation effort. The largest dataset nowadays contains merely two hundred object categories, implying the difficulty to scale up part segmentation to an unconstrained setting. To address this, we propose to explore a seemingly simplified but empirically useful and scalable task, class-agnostic part segmentation. In this problem, we disregard the part class labels in training and instead treat all of them as a single part class. We argue and demonstrate that models trained without part classes can better localize parts and segment them on objects unseen in training. We then present two further improvements. First, we propose to make the model object-aware, leveraging the fact that parts are “compositions” whose extents are bounded by objects, whose appearances are by nature not independent but bundled. Second, we introduce a novel approach to improve part segmentation on unseen objects, inspired by an interesting finding --- for unseen objects, the pixel-wise features extracted by the model often reveal high-quality part segments. To this end, we propose a novel self-supervised procedure that iterates between pixel clustering and supervised contrastive learning that pulls pixels closer or pushes them away. Via extensive experiments on PartImageNet and Pascal-Part, we show notable and consistent gains by our approach, essentially a critical step towards open-world part segmentation.


290
Pruning Parameterization With Bi-Level Optimization for Efficient Semantic Segmentation on the Edge

Changdi Yang · Pu Zhao · Yanyu Li · Wei Niu · Jiexiong Guan · Hao Tang · Minghai Qin · Bin Ren · Xue Lin · Yanzhi Wang

With the ever-increasing popularity of edge devices, it is necessary to implement real-time segmentation on the edge for autonomous driving and many other applications. Vision Transformers (ViTs) have shown considerably stronger results for many vision tasks. However, ViTs with the full-attention mechanism usually consume a large number of computational resources, leading to difficulties for real-time inference on edge devices. In this paper, we aim to derive ViTs with fewer computations and fast inference speed to facilitate the dense prediction of semantic segmentation on edge devices. To achieve this, we propose a pruning parameterization method to formulate the pruning problem of semantic segmentation. Then we adopt a bi-level optimization method to solve this problem with the help of implicit gradients. Our experimental results demonstrate that we can achieve 38.9 mIoU on ADE20K val with a speed of 56.5 FPS on Samsung S21, which is the highest mIoU under the same computation constraint with real-time inference.


291
HGFormer: Hierarchical Grouping Transformer for Domain Generalized Semantic Segmentation

Jian Ding · Nan Xue · Gui-Song Xia · Bernt Schiele · Dengxin Dai

Current semantic segmentation models have achieved great success under the independent and identically distributed (i.i.d.) condition. However, in real-world applications, test data might come from a different domain than training data. Therefore, it is important to improve model robustness against domain differences. This work studies semantic segmentation under the domain generalization setting, where a model is trained only on the source domain and tested on the unseen target domain. Existing works show that Vision Transformers are more robust than CNNs and show that this is related to the visual grouping property of self-attention. In this work, we propose a novel hierarchical grouping transformer (HGFormer) to explicitly group pixels to form part-level masks and then whole-level masks. The masks at different scales aim to segment out both parts and a whole of classes. HGFormer combines mask classification results at both scales for class label prediction. We assemble multiple interesting cross-domain settings by using seven public semantic segmentation datasets. Experiments show that HGFormer yields more robust semantic segmentation results than per-pixel classification methods and flat-grouping transformers, and outperforms previous methods significantly. Code will be available at https://github.com/dingjiansw101/HGFormer.


292
Exemplar-FreeSOLO: Enhancing Unsupervised Instance Segmentation With Exemplars

Taoseef Ishtiak · Qing En · Yuhong Guo

Instance segmentation seeks to identify and segment each object from images, which often relies on a large number of dense annotations for model training. To alleviate this burden, unsupervised instance segmentation methods have been developed to train class-agnostic instance segmentation models without any annotation. In this paper, we propose a novel unsupervised instance segmentation approach, Exemplar-FreeSOLO, to enhance unsupervised instance segmentation by exploiting a limited number of unannotated and unsegmented exemplars. The proposed framework offers a new perspective on directly perceiving top-down information without annotations. Specifically, Exemplar-FreeSOLO introduces a novel exemplarknowledge abstraction module to acquire beneficial top-down guidance knowledge for instances using unsupervised exemplar object extraction. Moreover, a new exemplar embedding contrastive module is designed to enhance the discriminative capability of the segmentation model by exploiting the contrastive exemplar-based guidance knowledge in the embedding space. To evaluate the proposed ExemplarFreeSOLO, we conduct comprehensive experiments and perform in-depth analyses on three image instance segmentation datasets. The experimental results demonstrate that the proposed approach is effective and outperforms the state-of-the-art methods.


293
Weakly-Supervised Domain Adaptive Semantic Segmentation With Prototypical Contrastive Learning

Anurag Das · Yongqin Xian · Dengxin Dai · Bernt Schiele

There has been a lot of effort in improving the performance of unsupervised domain adaptation for semantic segmentation task, however there is still a huge gap in performance when compared with supervised learning. In this work, we propose a common framework to use different weak labels, e.g. image, point and coarse labels from target domain to reduce this performance gap. Specifically, we propose to learn better prototypes that are representative class features, by exploiting these weak labels. We use these improved prototypes for contrastive alignment of class features. In particular, we perform two different feature alignments, first, we align pixel features with prototypes within each domain and second, we align pixel features from source to prototype of target domain in an asymmetric way. This asymmetric alignment is beneficial as it preserves the target features during training, which is essential when weak labels are available from target domain. Our experiments on standard benchmarks shows that our framework achieves significant improvement compared to existing works and is able to reduce the performance gap with supervised learning.


294
Spatial-Temporal Concept Based Explanation of 3D ConvNets

Ying Ji · Yu Wang · Jien Kato

Convolutional neural networks (CNNs) have shown remarkable performance on various tasks. Despite its widespread adoption, the decision procedure of the network still lacks transparency and interpretability, making it difficult to enhance the performance further. Hence, there has been considerable interest in providing explanation and interpretability for CNNs over the last few years. Explainable artificial intelligence (XAI) investigates the relationship between input images or videos and output predictions. Recent studies have achieved outstanding success in explaining 2D image classification ConvNets. On the other hand, due to the high computation cost and complexity of video data, the explanation of 3D video recognition ConvNets is relatively less studied. And none of them are able to produce a high-level explanation. In this paper, we propose a STCE (Spatial-temporal Concept-based Explanation) framework for interpreting 3D ConvNets. In our approach: (1) videos are represented with high-level supervoxels, similar supervoxels are clustered as a concept, which is straightforward for human to understand; and (2) the interpreting framework calculates a score for each concept, which reflects its significance in the ConvNet decision procedure. Experiments on diverse 3D ConvNets demonstrate that our method can identify global concepts with different importance levels, allowing us to investigate the impact of the concepts on a target task, such as action recognition, in-depth. The source codes are publicly available at https://github.com/yingji425/STCE.


295
Sparsely Annotated Semantic Segmentation With Adaptive Gaussian Mixtures

Linshan Wu · Zhun Zhong · Leyuan Fang · Xingxin He · Qiang Liu · Jiayi Ma · Hao Chen

Sparsely annotated semantic segmentation (SASS) aims to learn a segmentation model by images with sparse labels (i.e., points or scribbles). Existing methods mainly focus on introducing low-level affinity or generating pseudo labels to strengthen supervision, while largely ignoring the inherent relation between labeled and unlabeled pixels. In this paper, we observe that pixels that are close to each other in the feature space are more likely to share the same class. Inspired by this, we propose a novel SASS framework, which is equipped with an Adaptive Gaussian Mixture Model (AGMM). Our AGMM can effectively endow reliable supervision for unlabeled pixels based on the distributions of labeled and unlabeled pixels. Specifically, we first build Gaussian mixtures using labeled pixels and their relatively similar unlabeled pixels, where the labeled pixels act as centroids, for modeling the feature distribution of each class. Then, we leverage the reliable information from labeled pixels and adaptively generated GMM predictions to supervise the training of unlabeled pixels, achieving online, dynamic, and robust self-supervision. In addition, by capturing category-wise Gaussian mixtures, AGMM encourages the model to learn discriminative class decision boundaries in an end-to-end contrastive learning manner. Experimental results conducted on the PASCAL VOC 2012 and Cityscapes datasets demonstrate that our AGMM can establish new state-of-the-art SASS performance. Code is available at https://github.com/Luffy03/AGMM-SASS.


296
Fuzzy Positive Learning for Semi-Supervised Semantic Segmentation

Pengchong Qiao · Zhidan Wei · Yu Wang · Zhennan Wang · Guoli Song · Fan Xu · Xiangyang Ji · Chang Liu · Jie Chen

Semi-supervised learning (SSL) essentially pursues class boundary exploration with less dependence on human annotations. Although typical attempts focus on ameliorating the inevitable error-prone pseudo-labeling, we think differently and resort to exhausting informative semantics from multiple probably correct candidate labels. In this paper, we introduce Fuzzy Positive Learning (FPL) for accurate SSL semantic segmentation in a plug-and-play fashion, targeting adaptively encouraging fuzzy positive predictions and suppressing highly-probable negatives. Being conceptually simple yet practically effective, FPL can remarkably alleviate interference from wrong pseudo labels and progressively achieve clear pixel-level semantic discrimination. Concretely, our FPL approach consists of two main components, including fuzzy positive assignment (FPA) to provide an adaptive number of labels for each pixel and fuzzy positive regularization (FPR) to restrict the predictions of fuzzy positive categories to be larger than the rest under different perturbations. Theoretical analysis and extensive experiments on Cityscapes and VOC 2012 with consistent performance gain justify the superiority of our approach. Codes are available in https://github.com/qpc1611094/FPL.


297
STAR Loss: Reducing Semantic Ambiguity in Facial Landmark Detection

Zhenglin Zhou · Huaxia Li · Hong Liu · Nanyang Wang · Gang Yu · Rongrong Ji

Recently, deep learning-based facial landmark detection has achieved significant improvement. However, the semantic ambiguity problem degrades detection performance. Specifically, the semantic ambiguity causes inconsistent annotation and negatively affects the model’s convergence, leading to worse accuracy and instability prediction. To solve this problem, we propose a Self-adapTive Ambiguity Reduction (STAR) loss by exploiting the properties of semantic ambiguity. We find that semantic ambiguity results in the anisotropic predicted distribution, which inspires us to use predicted distribution to represent semantic ambiguity. Based on this, we design the STAR loss that measures the anisotropism of the predicted distribution. Compared with the standard regression loss, STAR loss is encouraged to be small when the predicted distribution is anisotropic and thus adaptively mitigates the impact of semantic ambiguity. Moreover, we propose two kinds of eigenvalue restriction methods that could avoid both distribution’s abnormal change and the model’s premature convergence. Finally, the comprehensive experiments demonstrate that STAR loss outperforms the state-of-the-art methods on three benchmarks, i.e., COFW, 300W, and WFLW, with negligible computation overhead. Code is at https://github.com/ZhenglinZhou/STAR


298
Boosting Low-Data Instance Segmentation by Unsupervised Pre-Training With Saliency Prompt

Hao Li · Dingwen Zhang · Nian Liu · Lechao Cheng · Yalun Dai · Chao Zhang · Xinggang Wang · Junwei Han

Recently, inspired by DETR variants, query-based end-to-end instance segmentation (QEIS) methods have outperformed CNN-based models on large-scale datasets. Yet they would lose efficacy when only a small amount of training data is available since it’s hard for the crucial queries/kernels to learn localization and shape priors. To this end, this work offers a novel unsupervised pre-training solution for low-data regimes. Inspired by the recent success of the Prompting technique, we introduce a new pre-training method that boosts QEIS models by giving Saliency Prompt for queries/kernels. Our method contains three parts: 1) Saliency Masks Proposal is responsible for generating pseudo masks from unlabeled images based on the saliency mechanism. 2) Prompt-Kernel Matching transfers pseudo masks into prompts and injects the corresponding localization and shape priors to the best-matched kernels. 3) Kernel Supervision is applied to supply supervision at the kernel level for robust learning. From a practical perspective, our pre-training method helps QEIS models achieve a similar convergence speed and comparable performance with CNN-based models in low-data regimes. Experimental results show that our method significantly boosts several QEIS models on three datasets.


299
Decoupled Semantic Prototypes Enable Learning From Diverse Annotation Types for Semi-Weakly Segmentation in Expert-Driven Domains

Simon Reiß · Constantin Seibold · Alexander Freytag · Erik Rodner · Rainer Stiefelhagen

A vast amount of images and pixel-wise annotations allowed our community to build scalable segmentation solutions for natural domains. However, the transfer to expert-driven domains like microscopy applications or medical healthcare remains difficult as domain experts are a critical factor due to their limited availability for providing pixel-wise annotations. To enable affordable segmentation solutions for such domains, we need training strategies which can simultaneously handle diverse annotation types and are not bound to costly pixel-wise annotations. In this work, we analyze existing training algorithms towards their flexibility for different annotation types and scalability to small annotation regimes. We conduct an extensive evaluation in the challenging domain of organelle segmentation and find that existing semi- and semi-weakly supervised training algorithms are not able to fully exploit diverse annotation types. Driven by our findings, we introduce Decoupled Semantic Prototypes (DSP) as a training method for semantic segmentation which enables learning from annotation types as diverse as image-level-, point-, bounding box-, and pixel-wise annotations and which leads to remarkable accuracy gains over existing solutions for semi-weakly segmentation.


300
The Treasure Beneath Multiple Annotations: An Uncertainty-Aware Edge Detector

Caixia Zhou · Yaping Huang · Mengyang Pu · Qingji Guan · Li Huang · Haibin Ling

Deep learning-based edge detectors heavily rely on pixel-wise labels which are often provided by multiple annotators. Existing methods fuse multiple annotations using a simple voting process, ignoring the inherent ambiguity of edges and labeling bias of annotators. In this paper, we propose a novel uncertainty-aware edge detector (UAED), which employs uncertainty to investigate the subjectivity and ambiguity of diverse annotations. Specifically, we first convert the deterministic label space into a learnable Gaussian distribution, whose variance measures the degree of ambiguity among different annotations. Then we regard the learned variance as the estimated uncertainty of the predicted edge maps, and pixels with higher uncertainty are likely to be hard samples for edge detection. Therefore we design an adaptive weighting loss to emphasize the learning from those pixels with high uncertainty, which helps the network to gradually concentrate on the important pixels. UAED can be combined with various encoder-decoder backbones, and the extensive experiments demonstrate that UAED achieves superior performance consistently across multiple edge detection benchmarks. The source code is available at https://github.com/ZhouCX117/UAED.


301
Knowledge Combination To Learn Rotated Detection Without Rotated Annotation

Tianyu Zhu · Bryce Ferenczi · Pulak Purkait · Tom Drummond · Hamid Rezatofighi · Anton van den Hengel

Rotated bounding boxes drastically reduce output ambiguity of elongated objects, making it superior to axis-aligned bounding boxes. Despite the effectiveness, rotated detectors are not widely employed. Annotating rotated bounding boxes is such a laborious process that they are not provided in many detection datasets where axis-aligned annotations are used instead. In this paper, we propose a framework that allows the model to predict precise rotated boxes only requiring cheaper axis-aligned annotation of the target dataset. To achieve this, we leverage the fact that neural networks are capable of learning richer representation of the target domain than what is utilized by the task. The under-utilized representation can be exploited to address a more detailed task. Our framework combines task knowledge of an out-of-domain source dataset with stronger annotation and domain knowledge of the target dataset with weaker annotation. A novel assignment process and projection loss are used to enable the co-training on the source and target datasets. As a result, the model is able to solve the more detailed task in the target domain, without additional computation overhead during inference. We extensively evaluate the method on various target datasets including fresh-produce dataset, HRSC2016 and SSDD. Results show that the proposed method consistently performs on par with the fully supervised approach.


302
Mapping Degeneration Meets Label Evolution: Learning Infrared Small Target Detection With Single Point Supervision

Xinyi Ying · Li Liu · Yingqian Wang · Ruojing Li · Nuo Chen · Zaiping Lin · Weidong Sheng · Shilin Zhou

Training a convolutional neural network (CNN) to detect infrared small targets in a fully supervised manner has gained remarkable research interests in recent years, but is highly labor expensive since a large number of per-pixel annotations are required. To handle this problem, in this paper, we make the first attempt to achieve infrared small target detection with point-level supervision. Interestingly, during the training phase supervised by point labels, we discover that CNNs first learn to segment a cluster of pixels near the targets, and then gradually converge to predict groundtruth point labels. Motivated by this “mapping degeneration” phenomenon, we propose a label evolution framework named label evolution with single point supervision (LESPS) to progressively expand the point label by leveraging the intermediate predictions of CNNs. In this way, the network predictions can finally approximate the updated pseudo labels, and a pixel-level target mask can be obtained to train CNNs in an end-to-end manner. We conduct extensive experiments with insightful visualizations to validate the effectiveness of our method. Experimental results show that CNNs equipped with LESPS can well recover the target masks from corresponding point labels, and can achieve over 70% and 95% of their fully supervised performance in terms of pixel-level intersection over union (IoU) and object-level probability of detection (Pd), respectively. Code is available at https://github.com/XinyiYing/LESPS.


303
SAP-DETR: Bridging the Gap Between Salient Points and Queries-Based Transformer Detector for Fast Model Convergency

Yang Liu · Yao Zhang · Yixin Wang · Yang Zhang · Jiang Tian · Zhongchao Shi · Jianping Fan · Zhiqiang He

Recently, the dominant DETR-based approaches apply central-concept spatial prior to accelerating Transformer detector convergency. These methods gradually refine the reference points to the center of target objects and imbue object queries with the updated central reference information for spatially conditional attention. However, centralizing reference points may severely deteriorate queries’ saliency and confuse detectors due to the indiscriminative spatial prior. To bridge the gap between the reference points of salient queries and Transformer detectors, we propose SAlient Point-based DETR (SAP-DETR) by treating object detection as a transformation from salient points to instance objects. In SAP-DETR, we explicitly initialize a query-specific reference point for each object query, gradually aggregate them into an instance object, and then predict the distance from each side of the bounding box to these points. By rapidly attending to query-specific reference region and other conditional extreme regions from the image features, SAP-DETR can effectively bridge the gap between the salient point and the query-based Transformer detector with a significant convergency speed. Our extensive experiments have demonstrated that SAP-DETR achieves 1.4 times convergency speed with competitive performance. Under the standard training scheme, SAP-DETR stably promotes the SOTA approaches by ~1.0 AP. Based on ResNet-DC-101, SAP-DETR achieves 46.9 AP. The code will be released at https://github.com/liuyang-ict/SAP-DETR.


304
Zero-Shot Object Counting

Jingyi Xu · Hieu Le · Vu Nguyen · Viresh Ranjan · Dimitris Samaras

Class-agnostic object counting aims to count object instances of an arbitrary class at test time. It is challenging but also enables many potential applications. Current methods require human-annotated exemplars as inputs which are often unavailable for novel categories, especially for autonomous systems. Thus, we propose zero-shot object counting (ZSC), a new setting where only the class name is available during test time. Such a counting system does not require human annotators in the loop and can operate automatically. Starting from a class name, we propose a method that can accurately identify the optimal patches which can then be used as counting exemplars. Specifically, we first construct a class prototype to select the patches that are likely to contain the objects of interest, namely class-relevant patches. Furthermore, we introduce a model that can quantitatively measure how suitable an arbitrary patch is as a counting exemplar. By applying this model to all the candidate patches, we can select the most suitable patches as exemplars for counting. Experimental results on a recent class-agnostic counting dataset, FSC-147, validate the effectiveness of our method.


305
SOOD: Towards Semi-Supervised Oriented Object Detection

Wei Hua · Dingkang Liang · Jingyu Li · Xiaolong Liu · Zhikang Zou · Xiaoqing Ye · Xiang Bai

Semi-Supervised Object Detection~(SSOD), aiming to explore unlabeled data for boosting object detectors, has become an active task in recent years. However, existing SSOD approaches mainly focus on horizontal objects, leaving multi-oriented objects that are common in aerial images unexplored. This paper proposes a novel Semi-supervised Oriented Object Detection model, termed SOOD, built upon the mainstream pseudo-labeling framework. Towards oriented objects in aerial scenes, we design two loss functions to provide better supervision. Focusing on the orientations of objects, the first loss regularizes the consistency between each pseudo-label-prediction pair (includes a prediction and its corresponding pseudo label) with adaptive weights based on their orientation gap. Focusing on the layout of an image, the second loss regularizes the similarity and explicitly builds the many-to-many relation between the sets of pseudo-labels and predictions. Such a global consistency constraint can further boost semi-supervised learning. Our experiments show that when trained with the two proposed losses, SOOD surpasses the state-of-the-art SSOD methods under various settings on the DOTA-v1.5 benchmark. The code will be available at https://github.com/HamPerdredes/SOOD.


306
Large-Scale Training Data Search for Object Re-Identification

Yue Yao · Tom Gedeon · Liang Zheng

We consider a scenario where we have access to the target domain, but cannot afford on-the-fly training data annotation, and instead would like to construct an alternative training set from a large-scale data pool such that a competitive model can be obtained. We propose a search and pruning (SnP) solution to this training data search problem, tailored to object re-identification (re-ID), an application aiming to match the same object captured by different cameras. Specifically, the search stage identifies and merges clusters of source identities which exhibit similar distributions with the target domain. The second stage, subject to a budget, then selects identities and their images from the Stage I output, to control the size of the resulting training set for efficient training. The two steps provide us with training sets 80% smaller than the source pool while achieving a similar or even higher re-ID accuracy. These training sets are also shown to be superior to a few existing search methods such as random sampling and greedy sampling under the same budget on training data size. If we release the budget, training sets resulting from the first stage alone allow even higher re-ID accuracy. We provide interesting discussions on the specificity of our method to the re-ID problem and particularly its role in bridging the re-ID domain gap. The code is available at https://github.com/yorkeyao/SnP.


307
Ambiguity-Resistant Semi-Supervised Learning for Dense Object Detection

Chang Liu · Weiming Zhang · Xiangru Lin · Wei Zhang · Xiao Tan · Junyu Han · Xiaomao Li · Errui Ding · Jingdong Wang

With basic Semi-Supervised Object Detection (SSOD) techniques, one-stage detectors generally obtain limited promotions compared with two-stage clusters. We experimentally find that the root lies in two kinds of ambiguities: (1) Selection ambiguity that selected pseudo labels are less accurate, since classification scores cannot properly represent the localization quality. (2) Assignment ambiguity that samples are matched with improper labels in pseudo-label assignment, as the strategy is misguided by missed objects and inaccurate pseudo boxes. To tackle these problems, we propose a Ambiguity-Resistant Semi-supervised Learning (ARSL) for one-stage detectors. Specifically, to alleviate the selection ambiguity, Joint-Confidence Estimation (JCE) is proposed to jointly quantifies the classification and localization quality of pseudo labels. As for the assignment ambiguity, Task-Separation Assignment (TSA) is introduced to assign labels based on pixel-level predictions rather than unreliable pseudo boxes. It employs a ‘divide-and-conquer’ strategy and separately exploits positives for the classification and localization task, which is more robust to the assignment ambiguity. Comprehensive experiments demonstrate that ARSL effectively mitigates the ambiguities and achieves state-of-the-art SSOD performance on MS COCO and PASCAL VOC. Codes can be found at https://github.com/PaddlePaddle/PaddleDetection.


308
Towards Effective Visual Representations for Partial-Label Learning

Shiyu Xia · Jiaqi Lv · Ning Xu · Gang Niu · Xin Geng

Under partial-label learning (PLL) where, for each training instance, only a set of ambiguous candidate labels containing the unknown true label is accessible, contrastive learning has recently boosted the performance of PLL on vision tasks, attributed to representations learned by contrasting the same/different classes of entities. Without access to true labels, positive points are predicted using pseudolabels that are inherently noisy, and negative points often require large batches or momentum encoders, resulting in unreliable similarity information and a high computational overhead. In this paper, we rethink a state-of-the-art contrastive PLL method PiCO [24], inspiring the design of a simple framework termed PaPi (Partial-label learning with a guided Prototypical classifier), which demonstrates significant scope for improvement in representation learning, thus contributing to label disambiguation. PaPi guides the optimization of a prototypical classifier by a linear classifier with which they share the same feature encoder, thus explicitly encouraging the representation to reflect visual similarity between categories. It is also technically appealing, as PaPi requires only a few components in PiCO with the opposite direction of guidance, and directly eliminates the contrastive learning module that would introduce noise and consume computational resources. We empirically demonstrate that PaPi significantly outperforms other PLL methods on various image classification tasks.


309
Bi3D: Bi-Domain Active Learning for Cross-Domain 3D Object Detection

Jiakang Yuan · Bo Zhang · Xiangchao Yan · Tao Chen · Botian Shi · Yikang Li · Yu Qiao

Unsupervised Domain Adaptation (UDA) technique has been explored in 3D cross-domain tasks recently. Though preliminary progress has been made, the performance gap between the UDA-based 3D model and the supervised one trained with fully annotated target domain is still large. This motivates us to consider selecting partial-yet-important target data and labeling them at a minimum cost, to achieve a good trade-off between high performance and low annotation cost. To this end, we propose a Bi-domain active learning approach, namely Bi3D, to solve the cross-domain 3D object detection task. The Bi3D first develops a domainness-aware source sampling strategy, which identifies target-domain-like samples from the source domain to avoid the model being interfered by irrelevant source data. Then a diversity-based target sampling strategy is developed, which selects the most informative subset of target domain to improve the model adaptability to the target domain using as little annotation budget as possible. Experiments are conducted on typical cross-domain adaptation scenarios including cross-LiDAR-beam, cross-country, and cross-sensor, where Bi3D achieves a promising target-domain detection accuracy (89.63% on KITTI) compared with UDA-based work (84.29%), even surpassing the detector trained on the full set of the labeled target domain (88.98%).


310
Boosting Detection in Crowd Analysis via Underutilized Output Features

Shaokai Wu · Fengyu Yang

Detection-based methods have been viewed unfavorably in crowd analysis due to their poor performance in dense crowds. However, we argue that the potential of these methods has been underestimated, as they offer crucial information for crowd analysis that is often ignored. Specifically, the area size and confidence score of output proposals and bounding boxes provide insight into the scale and density of the crowd. To leverage these underutilized features, we propose Crowd Hat, a plug-and-play module that can be easily integrated with existing detection models. This module uses a mixed 2D-1D compression technique to refine the output features and obtain the spatial and numerical distribution of crowd-specific information. Based on these features, we further propose region-adaptive NMS thresholds and a decouple-then-align paradigm that address the major limitations of detection-based methods. Our extensive evaluations on various crowd analysis tasks, including crowd counting, localization, and detection, demonstrate the effectiveness of utilizing output features and the potential of detection-based methods in crowd analysis. Our code is available at https://github.com/wskingdom/Crowd-Hat.


311
Self-Supervised Learning From Images With a Joint-Embedding Predictive Architecture

Mahmoud Assran · Quentin Duval · Ishan Misra · Piotr Bojanowski · Pascal Vincent · Michael Rabbat · Yann LeCun · Nicolas Ballas

This paper demonstrates an approach for learning highly semantic image representations without relying on hand-crafted data-augmentations. We introduce the Image-based Joint-Embedding Predictive Architecture (I-JEPA), a non-generative approach for self-supervised learning from images. The idea behind I-JEPA is simple: from a single context block, predict the representations of various target blocks in the same image. A core design choice to guide I-JEPA towards producing semantic representations is the masking strategy; specifically, it is crucial to (a) sample target blocks with sufficiently large scale (semantic), and to (b) use a sufficiently informative (spatially distributed) context block. Empirically, when combined with Vision Transformers, we find I-JEPA to be highly scalable. For instance, we train a ViT-Huge/14 on ImageNet using 16 A100 GPUs in under 72 hours to achieve strong downstream performance across a wide range of tasks, from linear classification to object counting and depth prediction.


312
Weakly Supervised Segmentation With Point Annotations for Histopathology Images via Contrast-Based Variational Model

Hongrun Zhang · Liam Burrows · Yanda Meng · Declan Sculthorpe · Abhik Mukherjee · Sarah E. Coupland · Ke Chen · Yalin Zheng

Image segmentation is a fundamental task in the field of imaging and vision. Supervised deep learning for segmentation has achieved unparalleled success when sufficient training data with annotated labels are available. However, annotation is known to be expensive to obtain, especially for histopathology images where the target regions are usually with high morphology variations and irregular shapes. Thus, weakly supervised learning with sparse annotations of points is promising to reduce the annotation workload. In this work, we propose a contrast-based variational model to generate segmentation results, which serve as reliable complementary supervision to train a deep segmentation model for histopathology images. The proposed method considers the common characteristics of target regions in histopathology images and can be trained in an end-to-end manner. It can generate more regionally consistent and smoother boundary segmentation, and is more robust to unlabeled ‘novel’ regions. Experiments on two different histology datasets demonstrate its effectiveness and efficiency in comparison to previous models. Code is available at: https://github.com/hrzhang1123/CVMWSSegmentation.


313
DoNet: Deep De-Overlapping Network for Cytology Instance Segmentation

Hao Jiang · Rushan Zhang · Yanning Zhou · Yumeng Wang · Hao Chen

Cell instance segmentation in cytology images has significant importance for biology analysis and cancer screening, while remains challenging due to 1) the extensive overlapping translucent cell clusters that cause the ambiguous boundaries, and 2) the confusion of mimics and debris as nuclei. In this work, we proposed a De-overlapping Network (DoNet) in a decompose-and-recombined strategy. A Dual-path Region Segmentation Module (DRM) explicitly decomposes the cell clusters into intersection and complement regions, followed by a Semantic Consistency-guided Recombination Module (CRM) for integration. To further introduce the containment relationship of the nucleus in the cytoplasm, we design a Mask-guided Region Proposal Strategy (MRP) that integrates the cell attention maps for inner-cell instance prediction. We validate the proposed approach on ISBI2014 and CPS datasets. Experiments show that our proposed DoNet significantly outperforms other state-of-the-art (SOTA) cell instance segmentation methods. The code is available at https://github.com/DeepDoNet/DoNet.


314
MCF: Mutual Correction Framework for Semi-Supervised Medical Image Segmentation

Yongchao Wang · Bin Xiao · Xiuli Bi · Weisheng Li · Xinbo Gao

Semi-supervised learning is a promising method for medical image segmentation under limited annotation. However, the model cognitive bias impairs the segmentation performance, especially for edge regions. Furthermore, current mainstream semi-supervised medical image segmentation (SSMIS) methods lack designs to handle model bias. The neural network has a strong learning ability, but the cognitive bias will gradually deepen during the training, and it is difficult to correct itself. We propose a novel mutual correction framework (MCF) to explore network bias correction and improve the performance of SSMIS. Inspired by the plain contrast idea, MCF introduces two different subnets to explore and utilize the discrepancies between subnets to correct cognitive bias of the model. More concretely, a contrastive difference review (CDR) module is proposed to find out inconsistent prediction regions and perform a review training. Additionally, a dynamic competitive pseudo-label generation (DCPLG) module is proposed to evaluate the performance of subnets in real-time, dynamically selecting more reliable pseudo-labels. Experimental results on two medical image databases with different modalities (CT and MRI) show that our method achieves superior performance compared to several state-of-the-art methods. The code will be available at https://github.com/WYC-321/MCF.


315
Histopathology Whole Slide Image Analysis With Heterogeneous Graph Representation Learning

Tsai Hor Chan · Fernando Julio Cendra · Lan Ma · Guosheng Yin · Lequan Yu

Graph-based methods have been extensively applied to whole slide histopathology image (WSI) analysis due to the advantage of modeling the spatial relationships among different entities. However, most of the existing methods focus on modeling WSIs with homogeneous graphs (e.g., with homogeneous node type). Despite their successes, these works are incapable of mining the complex structural relations between biological entities (e.g., the diverse interaction among different cell types) in the WSI. We propose a novel heterogeneous graph-based framework to leverage the inter-relationships among different types of nuclei for WSI analysis. Specifically, we formulate the WSI as a heterogeneous graph with “nucleus-type” attribute to each node and a semantic similarity attribute to each edge. We then present a new heterogeneous-graph edge attribute transformer (HEAT) to take advantage of the edge and node heterogeneity during massage aggregating. Further, we design a new pseudo-label-based semantic-consistent pooling mechanism to obtain graph-level features, which can mitigate the over-parameterization issue of conventional cluster-based pooling. Additionally, observing the limitations of existing association-based localization methods, we propose a causal-driven approach attributing the contribution of each node to improve the interpretability of our framework. Extensive experiments on three public TCGA benchmark datasets demonstrate that our framework outperforms the state-of-the-art methods with considerable margins on various tasks. Our codes are available at https://github.com/HKU-MedAI/WSI-HGNN.


316
Highlight
PEFAT: Boosting Semi-Supervised Medical Image Classification via Pseudo-Loss Estimation and Feature Adversarial Training

Qingjie Zeng · Yutong Xie · Zilin Lu · Yong Xia

Pseudo-labeling approaches have been proven beneficial for semi-supervised learning (SSL) schemes in computer vision and medical imaging. Most works are dedicated to finding samples with high-confidence pseudo-labels from the perspective of model predicted probability. Whereas this way may lead to the inclusion of incorrectly pseudo-labeled data if the threshold is not carefully adjusted. In addition, low-confidence probability samples are frequently disregarded and not employed to their full potential. In this paper, we propose a novel Pseudo-loss Estimation and Feature Adversarial Training semi-supervised framework, termed as PEFAT, to boost the performance of multi-class and multi-label medical image classification from the point of loss distribution modeling and adversarial training. Specifically, we develop a trustworthy data selection scheme to split a high-quality pseudo-labeled set, inspired by the dividable pseudo-loss assumption that clean data tend to show lower loss while noise data is the opposite. Instead of directly discarding these samples with low-quality pseudo-labels, we present a novel regularization approach to learn discriminate information from them via injecting adversarial noises at the feature-level to smooth the decision boundary. Experimental results on three medical and two natural image benchmarks validate that our PEFAT can achieve a promising performance and surpass other state-of-the-art methods. The code is available at https://github.com/maxwell0027/PEFAT.


317
Causally-Aware Intraoperative Imputation for Overall Survival Time Prediction

Xiang Li · Xuelin Qian · Litian Liang · Lingjie Kong · Qiaole Dong · Jiejun Chen · Dingxia Liu · Xiuzhong Yao · Yanwei Fu

Previous efforts in vision community are mostly made on learning good representations from visual patterns. Beyond this, this paper emphasizes the high-level ability of causal reasoning. We thus present a case study of solving the challenging task of Overall Survival (OS) time in primary liver cancers. Critically, the prediction of OS time at the early stage remains challenging, due to the unobvious image patterns of reflecting the OS. To this end, we propose a causal inference system by leveraging the intraoperative attributes and the correlation among them, as an intermediate supervision to bridge the gap between the images and the final OS. Particularly, we build a causal graph, and train the images to estimate the intraoperative attributes for final OS prediction. We present a novel Causally-aware Intraoperative Imputation Model (CAWIM) that can sequentially predict each attribute using its parent nodes in the estimated causal graph. To determine the causal directions, we propose a splitting-voting mechanism, which votes for the direction for each pair of adjacent nodes among multiple predictions obtained via causal discovery from heterogeneity. The practicability and effectiveness of our method are demonstrated by the promising result on liver cancer dataset of 361 patients with long-term observations.


318
Balanced Energy Regularization Loss for Out-of-Distribution Detection

hyunjun choi · Hawook Jeong · Jin Young Choi

In the field of out-of-distribution (OOD) detection, a previous method that use auxiliary data as OOD data has shown promising performance. However, the method provides an equal loss to all auxiliary data to differentiate them from inliers. However, based on our observation, in various tasks, there is a general imbalance in the distribution of the auxiliary OOD data across classes. We propose a balanced energy regularization loss that is simple but generally effective for a variety of tasks. Our balanced energy regularization loss utilizes class-wise different prior probabilities for auxiliary data to address the class imbalance in OOD data. The main concept is to regularize auxiliary samples from majority classes, more heavily than those from minority classes. Our approach performs better for OOD detection in semantic segmentation, long-tailed image classification, and image classification than the prior energy regularization loss. Furthermore, our approach achieves state-of-the-art performance in two tasks: OOD detection in semantic segmentation and long-tailed image classification.


319
Block Selection Method for Using Feature Norm in Out-of-Distribution Detection

Yeonguk Yu · Sungho Shin · Seongju Lee · Changhyun Jun · Kyoobin Lee

Detecting out-of-distribution (OOD) inputs during the inference stage is crucial for deploying neural networks in the real world. Previous methods commonly relied on the output of a network derived from the highly activated feature map. In this study, we first revealed that a norm of the feature map obtained from the other block than the last block can be a better indicator of OOD detection. Motivated by this, we propose a simple framework consisting of FeatureNorm: a norm of the feature map and NormRatio: a ratio of FeatureNorm for ID and OOD to measure the OOD detection performance of each block. In particular, to select the block that provides the largest difference between FeatureNorm of ID and FeatureNorm of OOD, we create jigsaw puzzles as pseudo OOD from ID training samples and calculate NormRatio, and the block with the largest value is selected. After the suitable block is selected, OOD detection with the FeatureNorm outperforms other OOD detection methods by reducing FPR95 by up to 52.77% on CIFAR10 benchmark and by up to 48.53% on ImageNet benchmark. We demonstrate that our framework can generalize to various architectures and the importance of block selection, which can improve previous OOD detection methods as well.


320
Highly Confident Local Structure Based Consensus Graph Learning for Incomplete Multi-View Clustering

Jie Wen · Chengliang Liu · Gehui Xu · Zhihao Wu · Chao Huang · Lunke Fei · Yong Xu

Graph-based multi-view clustering has attracted extensive attention because of the powerful clustering-structure representation ability and noise robustness. Considering the reality of a large amount of incomplete data, in this paper, we propose a simple but effective method for incomplete multi-view clustering based on consensus graph learning, termed as HCLS_CGL. Unlike existing methods that utilize graph constructed from raw data to aid in the learning of consistent representation, our method directly learns a consensus graph across views for clustering. Specifically, we design a novel confidence graph and embed it to form a confidence structure driven consensus graph learning model. Our confidence graph is based on an intuitive similar-nearest-neighbor hypothesis, which does not require any additional information and can help the model to obtain a high-quality consensus graph for better clustering. Numerous experiments are performed to confirm the effectiveness of our method.


321
Siamese DETR

Zeren Chen · Gengshi Huang · Wei Li · Jianing Teng · Kun Wang · Jing Shao · Chen Change Loy · Lu Sheng

Recent self-supervised methods are mainly designed for representation learning with the base model, e.g., ResNets or ViTs. They cannot be easily transferred to DETR, with task-specific Transformer modules. In this work, we present Siamese DETR, a Siamese self-supervised pretraining approach for the Transformer architecture in DETR. We consider learning view-invariant and detection-oriented representations simultaneously through two complementary tasks, i.e., localization and discrimination, in a novel multi-view learning framework. Two self-supervised pretext tasks are designed: (i) Multi-View Region Detection aims at learning to localize regions-of-interest between augmented views of the input, and (ii) Multi-View Semantic Discrimination attempts to improve object-level discrimination for each region. The proposed Siamese DETR achieves state-of-the-art transfer performance on COCO and PASCAL VOC detection using different DETR variants in all setups. Code is available at https://github.com/Zx55/SiameseDETR.


322
Towards Bridging the Performance Gaps of Joint Energy-Based Models

Xiulong Yang · Qing Su · Shihao Ji

Can we train a hybrid discriminative-generative model with a single network? This question has recently been answered in the affirmative, introducing the field of Joint Energy-based Model (JEM), which achieves high classification accuracy and image generation quality simultaneously. Despite recent advances, there remain two performance gaps: the accuracy gap to the standard softmax classifier, and the generation quality gap to state-of-the-art generative models. In this paper, we introduce a variety of training techniques to bridge the accuracy gap and the generation quality gap of JEM. 1) We incorporate a recently proposed sharpness-aware minimization (SAM) framework to train JEM, which promotes the energy landscape smoothness and the generalization of JEM. 2) We exclude data augmentation from the maximum likelihood estimate pipeline of JEM, and mitigate the negative impact of data augmentation to image generation quality. Extensive experiments on multiple datasets demonstrate our SADA-JEM achieves state-of-the-art performances and outperforms JEM in image classification, image generation, calibration, out-of-distribution detection and adversarial robustness by a notable margin. Our code is available at https://github.com/sndnyang/SADAJEM.


323
Three Guidelines You Should Know for Universally Slimmable Self-Supervised Learning

Yun-Hao Cao · Peiqin Sun · Shuchang Zhou

We propose universally slimmable self-supervised learning (dubbed as US3L) to achieve better accuracy-efficiency trade-offs for deploying self-supervised models across different devices. We observe that direct adaptation of self-supervised learning (SSL) to universally slimmable networks misbehaves as the training process frequently collapses. We then discover that temporal consistent guidance is the key to the success of SSL for universally slimmable networks, and we propose three guidelines for the loss design to ensure this temporal consistency from a unified gradient perspective. Moreover, we propose dynamic sampling and group regularization strategies to simultaneously improve training efficiency and accuracy. Our US3L method has been empirically validated on both convolutional neural networks and vision transformers. With only once training and one copy of weights, our method outperforms various state-of-the-art methods (individually trained or not) on benchmarks including recognition, object detection and instance segmentation.


324
Boosting Transductive Few-Shot Fine-Tuning With Margin-Based Uncertainty Weighting and Probability Regularization

Ran Tao · Hao Chen · Marios Savvides

Few-Shot Learning (FSL) has been rapidly developed in recent years, potentially eliminating the requirement for significant data acquisition. Few-shot fine-tuning has been demonstrated to be practically efficient and helpful, especially for out-of-distribution datum. In this work, we first observe that the few-shot fine-tuned methods are learned with the imbalanced class marginal distribution. This observation further motivates us to propose the Transductive Fine-tuning with Margin-based uncertainty weighting and Probability regularization (TF-MP), which learns a more balanced class marginal distribution. We first conduct sample weighting on the testing data with margin-based uncertainty scores and further regularize each test sample’s categorical probability. TF-MP achieves state-of-the-art performance on in- / out-of-distribution evaluations of Meta-Dataset and surpasses previous transductive methods by a large margin.


325
CHMATCH: Contrastive Hierarchical Matching and Robust Adaptive Threshold Boosted Semi-Supervised Learning

Jianlong Wu · Haozhe Yang · Tian Gan · Ning Ding · Feijun Jiang · Liqiang Nie

The recently proposed FixMatch and FlexMatch have achieved remarkable results in the field of semi-supervised learning. But these two methods go to two extremes as FixMatch and FlexMatch use a pre-defined constant threshold for all classes and an adaptive threshold for each category, respectively. By only investigating consistency regularization, they also suffer from unstable results and indiscriminative feature representation, especially under the situation of few labeled samples. In this paper, we propose a novel CHMatch method, which can learn robust adaptive thresholds for instance-level prediction matching as well as discriminative features by contrastive hierarchical matching. We first present a memory-bank based robust threshold learning strategy to select highly-confident samples. In the meantime, we make full use of the structured information in the hierarchical labels to learn an accurate affinity graph for contrastive learning. CHMatch achieves very stable and superior results on several commonly-used benchmarks. For example, CHMatch achieves 8.44% and 9.02% error rate reduction over FlexMatch on CIFAR-100 under WRN-28-2 with only 4 and 25 labeled samples per class, respectively.


326
Highlight
MarginMatch: Improving Semi-Supervised Learning with Pseudo-Margins

Tiberiu Sosea · Cornelia Caragea

We introduce MarginMatch, a new SSL approach combining consistency regularization and pseudo-labeling, with its main novelty arising from the use of unlabeled data training dynamics to measure pseudo-label quality. Instead of using only the model’s confidence on an unlabeled example at an arbitrary iteration to decide if the example should be masked or not, MarginMatch also analyzes the behavior of the model on the pseudo-labeled examples as the training progresses, ensuring low fluctuations in the model’s predictions from one iteration to another. MarginMatch brings substantial improvements on four vision benchmarks in low data regimes and on two large-scale datasets, emphasizing the importance of enforcing high-quality pseudo-labels. Notably, we obtain an improvement in error rate over the state-of-the-art of 3.25% on CIFAR-100 with only 25 examples per class and of 4.19% on STL-10 using as few as 4 examples per class.


327
Ranking Regularization for Critical Rare Classes: Minimizing False Positives at a High True Positive Rate

Kiarash Mohammadi · He Zhao · Mengyao Zhai · Frederick Tung

In many real-world settings, the critical class is rare and a missed detection carries a disproportionately high cost. For example, tumors are rare and a false negative diagnosis could have severe consequences on treatment outcomes; fraudulent banking transactions are rare and an undetected occurrence could result in significant losses or legal penalties. In such contexts, systems are often operated at a high true positive rate, which may require tolerating high false positives. In this paper, we present a novel approach to address the challenge of minimizing false positives for systems that need to operate at a high true positive rate. We propose a ranking-based regularization (RankReg) approach that is easy to implement, and show empirically that it not only effectively reduces false positives, but also complements conventional imbalanced learning losses. With this novel technique in hand, we conduct a series of experiments on three broadly explored datasets (CIFAR-10&100 and Melanoma) and show that our approach lifts the previous state-of-the-art performance by notable margins.


328
Learning Imbalanced Data With Vision Transformers

Zhengzhuo Xu · Ruikang Liu · Shuo Yang · Zenghao Chai · Chun Yuan

The real-world data tends to be heavily imbalanced and severely skew the data-driven deep neural networks, which makes Long-Tailed Recognition (LTR) a massive challenging task. Existing LTR methods seldom train Vision Transformers (ViTs) with Long-Tailed (LT) data, while the off-the-shelf pretrain weight of ViTs always leads to unfair comparisons. In this paper, we systematically investigate the ViTs’ performance in LTR and propose LiVT to train ViTs from scratch only with LT data. With the observation that ViTs suffer more severe LTR problems, we conduct Masked Generative Pretraining (MGP) to learn generalized features. With ample and solid evidence, we show that MGP is more robust than supervised manners. Although Binary Cross Entropy (BCE) loss performs well with ViTs, it struggles on the LTR tasks. We further propose the balanced BCE to ameliorate it with strong theoretical groundings. Specially, we derive the unbiased extension of Sigmoid and compensate extra logit margins for deploying it. Our Bal-BCE contributes to the quick convergence of ViTs in just a few epochs. Extensive experiments demonstrate that with MGP and Bal-BCE, LiVT successfully trains ViTs well without any additional data and outperforms comparable state-of-the-art methods significantly, e.g., our ViT-B achieves 81.0% Top-1 accuracy in iNaturalist 2018 without bells and whistles. Code is available at https://github.com/XuZhengzhuo/LiVT.


329
No One Left Behind: Improving the Worst Categories in Long-Tailed Learning

Yingxiao Du · Jianxin Wu

Unlike the case when using a balanced training dataset, the per-class recall (i.e., accuracy) of neural networks trained with an imbalanced dataset are known to vary a lot from category to category. The convention in long-tailed recognition is to manually split all categories into three subsets and report the average accuracy within each subset. We argue that under such an evaluation setting, some categories are inevitably sacrificed. On one hand, focusing on the average accuracy on a balanced test set incurs little penalty even if some worst performing categories have zero accuracy. On the other hand, classes in the “Few” subset do not necessarily perform worse than those in the “Many” or “Medium” subsets. We therefore advocate to focus more on improving the lowest recall among all categories and the harmonic mean of all recall values. Specifically, we propose a simple plug-in method that is applicable to a wide range of methods. By simply re-training the classifier of an existing pre-trained model with our proposed loss function and using an optional ensemble trick that combines the predictions of the two classifiers, we achieve a more uniform distribution of recall values across categories, which leads to a higher harmonic mean accuracy while the (arithmetic) average accuracy is still high. The effectiveness of our method is justified on widely used benchmark datasets.


330
Global and Local Mixture Consistency Cumulative Learning for Long-Tailed Visual Recognitions

Fei Du · Peng Yang · Qi Jia · Fengtao Nan · Xiaoting Chen · Yun Yang

In this paper, our goal is to design a simple learning paradigm for long-tail visual recognition, which not only improves the robustness of the feature extractor but also alleviates the bias of the classifier towards head classes while reducing the training skills and overhead. We propose an efficient one-stage training strategy for long-tailed visual recognition called Global and Local Mixture Consistency cumulative learning (GLMC). Our core ideas are twofold: (1) a global and local mixture consistency loss improves the robustness of the feature extractor. Specifically, we generate two augmented batches by the global MixUp and local CutMix from the same batch data, respectively, and then use cosine similarity to minimize the difference. (2) A cumulative head-tail soft label reweighted loss mitigates the head class bias problem. We use empirical class frequencies to reweight the mixed label of the head-tail class for long-tailed data and then balance the conventional loss and the rebalanced loss with a coefficient accumulated by epochs. Our approach achieves state-of-the-art accuracy on CIFAR10-LT, CIFAR100-LT, and ImageNet-LT datasets. Additional experiments on balanced ImageNet and CIFAR demonstrate that GLMC can significantly improve the generalization of backbones. Code is made publicly available at https://github.com/ynu-yangpeng/GLMC


331
Curvature-Balanced Feature Manifold Learning for Long-Tailed Classification

Yanbiao Ma · Licheng Jiao · Fang Liu · Shuyuan Yang · Xu Liu · Lingling Li

To address the challenges of long-tailed classification, researchers have proposed several approaches to reduce model bias, most of which assume that classes with few samples are weak classes. However, recent studies have shown that tail classes are not always hard to learn, and model bias has been observed on sample-balanced datasets, suggesting the existence of other factors that affect model bias. In this work, we systematically propose a series of geometric measures for perceptual manifolds in deep neural networks, and then explore the effect of the geometric characteristics of perceptual manifolds on classification difficulty and how learning shapes the geometric characteristics of perceptual manifolds. An unanticipated finding is that the correlation between the class accuracy and the separation degree of perceptual manifolds gradually decreases during training, while the negative correlation with the curvature gradually increases, implying that curvature imbalance leads to model bias. Therefore, we propose curvature regularization to facilitate the model to learn curvature-balanced and flatter perceptual manifolds. Evaluations on multiple long-tailed and non-long-tailed datasets show the excellent performance and exciting generality of our approach, especially in achieving significant performance improvements based on current state-of-the-art techniques. Our work reminds researchers to pay attention to model bias not only on long-tailed datasets but also on non-long-tailed and even data-balanced datasets, which can improve model performance from another perspective.


332
DAA: A Delta Age AdaIN Operation for Age Estimation via Binary Code Transformer

Ping Chen · Xingpeng Zhang · Ye Li · Ju Tao · Bin Xiao · Bing Wang · Zongjie Jiang

Naked eye recognition of age is usually based on comparison with the age of others. However, this idea is ignored by computer tasks because it is difficult to obtain representative contrast images of each age. Inspired by the transfer learning, we designed the Delta Age AdaIN (DAA) operation to obtain the feature difference with each age, which obtains the style map of each age through the learned values representing the mean and standard deviation. We let the input of transfer learning as the binary code of age natural number to obtain continuous age feature information. The learned two groups of values in Binary code mapping are corresponding to the mean and standard deviation of the comparison ages. In summary, our method consists of four parts: FaceEncoder, DAA operation, Binary code mapping, and AgeDecoder modules. After getting the delta age via AgeDecoder, we take the average value of all comparison ages and delta ages as the predicted age. Compared with state-of-the-art methods, our method achieves better performance with fewer parameters on multiple facial age datasets. Code is available at https://github.com/redcping/DeltaAgeAdaIN


333
DLBD: A Self-Supervised Direct-Learned Binary Descriptor

Bin Xiao · Yang Hu · Bo Liu · Xiuli Bi · Weisheng Li · Xinbo Gao

For learning-based binary descriptors, the binarization process has not been well addressed. The reason is that the binarization blocks gradient back-propagation. Existing learning-based binary descriptors learn real-valued output, and then it is converted to binary descriptors by their proposed binarization processes. Since their binarization processes are not a component of the network, the learning-based binary descriptor cannot fully utilize the advances of deep learning. To solve this issue, we propose a model-agnostic plugin binary transformation layer (BTL), making the network directly generate binary descriptors. Then, we present the first self-supervised, direct-learned binary descriptor, dubbed DLBD. Furthermore, we propose ultra-wide temperature-scaled cross-entropy loss to adjust the distribution of learned descriptors in a larger range. Experiments demonstrate that the proposed BTL can substitute the previous binarization process. Our proposed DLBD outperforms SOTA on different tasks such as image retrieval and classification.


334
Progressive Open Space Expansion for Open-Set Model Attribution

Tianyun Yang · Danding Wang · Fan Tang · Xinying Zhao · Juan Cao · Sheng Tang

Despite the remarkable progress in generative technology, the Janus-faced issues of intellectual property protection and malicious content supervision have arisen. Efforts have been paid to manage synthetic images by attributing them to a set of potential source models. However, the closed-set classification setting limits the application in real-world scenarios for handling contents generated by arbitrary models. In this study, we focus on a challenging task, namely Open-Set Model Attribution (OSMA), to simultaneously attribute images to known models and identify those from unknown ones. Compared to existing open-set recognition (OSR) tasks focusing on semantic novelty, OSMA is more challenging as the distinction between images from known and unknown models may only lie in visually imperceptible traces. To this end, we propose a Progressive Open Space Expansion (POSE) solution, which simulates open-set samples that maintain the same semantics as closed-set samples but embedded with different imperceptible traces. Guided by a diversity constraint, the open space is simulated progressively by a set of lightweight augmentation models. We consider three real-world scenarios and construct an OSMA benchmark dataset, including unknown models trained with different random seeds, architectures, and datasets from known ones. Extensive experiments on the dataset demonstrate POSE is superior to both existing model attribution methods and off-the-shelf OSR methods.


335
DiGA: Distil To Generalize and Then Adapt for Domain Adaptive Semantic Segmentation

Fengyi Shen · Akhil Gurram · Ziyuan Liu · He Wang · Alois Knoll

Domain adaptive semantic segmentation methods commonly utilize stage-wise training, consisting of a warm-up and a self-training stage. However, this popular approach still faces several challenges in each stage: for warm-up, the widely adopted adversarial training often results in limited performance gain, due to blind feature alignment; for self-training, finding proper categorical thresholds is very tricky. To alleviate these issues, we first propose to replace the adversarial training in the warm-up stage by a novel symmetric knowledge distillation module that only accesses the source domain data and makes the model domain generalizable. Surprisingly, this domain generalizable warm-up model brings substantial performance improvement, which can be further amplified via our proposed cross-domain mixture data augmentation technique. Then, for the self-training stage, we propose a threshold-free dynamic pseudo-label selection mechanism to ease the aforementioned threshold problem and make the model better adapted to the target domain. Extensive experiments demonstrate that our framework achieves remarkable and consistent improvements compared to the prior arts on popular benchmarks. Codes and models are available at https://github.com/fy-vision/DiGA


336
Multi-Modal Learning With Missing Modality via Shared-Specific Feature Modelling

Hu Wang · Yuanhong Chen · Congbo Ma · Jodie Avery · Louise Hull · Gustavo Carneiro

The missing modality issue is critical but non-trivial to be solved by multi-modal models. Current methods aiming to handle the missing modality problem in multi-modal tasks, either deal with missing modalities only during evaluation or train separate models to handle specific missing modality settings. In addition, these models are designed for specific tasks, so for example, classification models are not easily adapted to segmentation tasks and vice versa. In this paper, we propose the Shared-Specific Feature Modelling (ShaSpec) method that is considerably simpler and more effective than competing approaches that address the issues above. ShaSpec is designed to take advantage of all available input modalities during training and evaluation by learning shared and specific features to better represent the input data. This is achieved from a strategy that relies on auxiliary tasks based on distribution alignment and domain classification, in addition to a residual feature fusion procedure. Also, the design simplicity of ShaSpec enables its easy adaptation to multiple tasks, such as classification and segmentation. Experiments are conducted on both medical image segmentation and computer vision classification, with results indicating that ShaSpec outperforms competing methods by a large margin. For instance, on BraTS2018, ShaSpec improves the SOTA by more than 3% for enhancing tumour, 5% for tumour core and 3% for whole tumour.


337
Towards All-in-One Pre-Training via Maximizing Multi-Modal Mutual Information

Weijie Su · Xizhou Zhu · Chenxin Tao · Lewei Lu · Bin Li · Gao Huang · Yu Qiao · Xiaogang Wang · Jie Zhou · Jifeng Dai

To effectively exploit the potential of large-scale models, various pre-training strategies supported by massive data from different sources are proposed, including supervised pre-training, weakly-supervised pre-training, and self-supervised pre-training. It has been proved that combining multiple pre-training strategies and data from various modalities/sources can greatly boost the training of large-scale models. However, current works adopt a multi-stage pre-training system, where the complex pipeline may increase the uncertainty and instability of the pre-training. It is thus desirable that these strategies can be integrated in a single-stage manner. In this paper, we first propose a general multi-modal mutual information formula as a unified optimization target and demonstrate that all mainstream approaches are special cases of our framework. Under this unified perspective, we propose an all-in-one single-stage pre-training approach, named Maximizing Multi-modal Mutual Information Pre-training (M3I Pre-training). Our approach achieves better performance than previous pre-training methods on various vision benchmarks, including ImageNet classification, COCO object detection, LVIS long-tailed object detection, and ADE20k semantic segmentation. Notably, we successfully pre-train a billion-level parameter image backbone and achieve state-of-the-art performance on various benchmarks under public data setting. Code shall be released at https://github.com/OpenGVLab/M3I-Pretraining.


338
Bi-Level Meta-Learning for Few-Shot Domain Generalization

Xiaorong Qin · Xinhang Song · Shuqiang Jiang

The goal of few-shot learning is to learn the generalizability from seen to unseen data with only a few samples. Most previous few-shot learning focus on learning generalizability within particular domains. However, the more practical scenarios may also require generalizability across domains. In this paper, we study the problem of Few-shot domain generalization (FSDG), which is a more challenging variant of few-shot classification. FSDG requires additional generalization with larger gap from seen domains to unseen domains. We address FSDG problem by meta-learning two levels of meta-knowledge, where the lower-level meta-knowledge are domain-specific embedding spaces as subspaces of a base space for intra-domain generalization, and the upper-level meta-knowledge is the base space and a prior subspace over domain-specific spaces for inter-domain generalization. We formulate the two levels of meta-knowledge learning problem with bi-level optimization, and further develop an optimization algorithm without Hessian information to solve it. We demonstrate our method is significantly superior to the previous works by evaluating it on the widely used benchmark Meta-Dataset.


339
Train/Test-Time Adaptation With Retrieval

Luca Zancato · Alessandro Achille · Tian Yu Liu · Matthew Trager · Pramuditha Perera · Stefano Soatto

We introduce Train/Test-Time Adaptation with Retrieval (T3AR), a method to adapt models both at train and test time by means of a retrieval module and a searchable pool of external samples. Before inference, T3AR adapts a given model to the downstream task using refined pseudo-labels and a self-supervised contrastive objective function whose noise distribution leverages retrieved real samples to improve feature adaptation on the target data manifold. The retrieval of real images is key to T3AR since it does not rely solely on synthetic data augmentations to compensate for the lack of adaptation data, as typically done by other adaptation algorithms. Furthermore, thanks to the retrieval module, our method gives the user or service provider the possibility to improve model adaptation on the downstream task by incorporating further relevant data or to fully remove samples that may no longer be available due to changes in user preference after deployment. First, we show that T3AR can be used at training time to improve downstream fine-grained classification over standard fine-tuning baselines, and the fewer the adaptation data the higher the relative improvement (up to 13%). Second, we apply T3AR for test-time adaptation and show that exploiting a pool of external images at test-time leads to more robust representations over existing methods on DomainNet-126 and VISDA-C, especially when few adaptation data are available (up to 8%).


340
Robust Test-Time Adaptation in Dynamic Scenarios

Longhui Yuan · Binhui Xie · Shuang Li

Test-time adaptation (TTA) intends to adapt the pretrained model to test distributions with only unlabeled test data streams. Most of the previous TTA methods have achieved great success on simple test data streams such as independently sampled data from single or multiple distributions. However, these attempts may fail in dynamic scenarios of real-world applications like autonomous driving, where the environments gradually change and the test data is sampled correlatively over time. In this work, we explore such practical test data streams to deploy the model on the fly, namely practical test-time adaptation (PTTA). To do so, we elaborate a Robust Test-Time Adaptation (RoTTA) method against the complex data stream in PTTA. More specifically, we present a robust batch normalization scheme to estimate the normalization statistics. Meanwhile, a memory bank is utilized to sample category-balanced data with consideration of timeliness and uncertainty. Further, to stabilize the training procedure, we develop a time-aware reweighting strategy with a teacher-student model. Extensive experiments prove that RoTTA enables continual testtime adaptation on the correlatively sampled data streams. Our method is easy to implement, making it a good choice for rapid deployment. The code is publicly available at https://github.com/BIT-DA/RoTTA


341
Domain Expansion of Image Generators

Yotam Nitzan · Michaël Gharbi · Richard Zhang · Taesung Park · Jun-Yan Zhu · Daniel Cohen-Or · Eli Shechtman

Can one inject new concepts into an already trained generative model, while respecting its existing structure and knowledge? We propose a new task -- domain expansion -- to address this. Given a pretrained generator and novel (but related) domains, we expand the generator to jointly model all domains, old and new, harmoniously. First, we note the generator contains a meaningful, pretrained latent space. Is it possible to minimally perturb this hard-earned representation, while maximally representing the new domains? Interestingly, we find that the latent space offers unused, “dormant” axes, which do not affect the output. This provides an opportunity -- by “repurposing” these axes, we are able to represent new domains, without perturbing the original representation. In fact, we find that pretrained generators have the capacity to add several -- even hundreds -- of new domains! Using our expansion technique, one “expanded” model can supersede numerous domain-specific models, without expanding model size. Additionally, using a single, expanded generator natively supports smooth transitions between and composition of domains.


342
Switchable Representation Learning Framework With Self-Compatibility

Shengsen Wu · Yan Bai · Yihang Lou · Xiongkun Linghu · Jianzhong He · Ling-Yu Duan

Real-world visual search systems involve deployments on multiple platforms with different computing and storage resources. Deploying a unified model that suits the minimal-constrain platforms leads to limited accuracy. It is expected to deploy models with different capacities adapting to the resource constraints, which requires features extracted by these models to be aligned in the metric space. The method to achieve feature alignments is called “compatible learning”. Existing research mainly focuses on the one-to-one compatible paradigm, which is limited in learning compatibility among multiple models. We propose a Switchable representation learning Framework with Self-Compatibility (SFSC). SFSC generates a series of compatible sub-models with different capacities through one training process. The optimization of sub-models faces gradients conflict, and we mitigate this problem from the perspective of the magnitude and direction. We adjust the priorities of sub-models dynamically through uncertainty estimation to co-optimize sub-models properly. Besides, the gradients with conflicting directions are projected to avoid mutual interference. SFSC achieves state-of-the-art performance on the evaluated datasets.


343
A New Benchmark: On the Utility of Synthetic Data With Blender for Bare Supervised Learning and Downstream Domain Adaptation

Hui Tang · Kui Jia

Deep learning in computer vision has achieved great success with the price of large-scale labeled training data. However, exhaustive data annotation is impracticable for each task of all domains of interest, due to high labor costs and unguaranteed labeling accuracy. Besides, the uncontrollable data collection process produces non-IID training and test data, where undesired duplication may exist. All these nuisances may hinder the verification of typical theories and exposure to new findings. To circumvent them, an alternative is to generate synthetic data via 3D rendering with domain randomization. We in this work push forward along this line by doing profound and extensive research on bare supervised learning and downstream domain adaptation. Specifically, under the well-controlled, IID data setting enabled by 3D rendering, we systematically verify the typical, important learning insights, e.g., shortcut learning, and discover the new laws of various data regimes and network architectures in generalization. We further investigate the effect of image formation factors on generalization, e.g., object scale, material texture, illumination, camera viewpoint, and background in a 3D scene. Moreover, we use the simulation-to-reality adaptation as a downstream task for comparing the transferability between synthetic and real data when used for pre-training, which demonstrates that synthetic data pre-training is also promising to improve real test results. Lastly, to promote future research, we develop a new large-scale synthetic-to-real benchmark for image classification, termed S2RDA, which provides more significant challenges for transfer from simulation to reality. The code and datasets are available at https://github.com/huitangtang/OntheUtilityofSynthetic_Data.


344
Adapting Shortcut With Normalizing Flow: An Efficient Tuning Framework for Visual Recognition

Yaoming Wang · Bowen Shi · Xiaopeng Zhang · Jin Li · Yuchen Liu · Wenrui Dai · Chenglin Li · Hongkai Xiong · Qi Tian

Pretraining followed by fine-tuning has proven to be effective in visual recognition tasks. However, fine-tuning all parameters can be computationally expensive, particularly for large-scale models. To mitigate the computational and storage demands, recent research has explored Parameter-Efficient Fine-Tuning (PEFT), which focuses on tuning a minimal number of parameters for efficient adaptation. Existing methods, however, fail to analyze the impact of the additional parameters on the model, resulting in an unclear and suboptimal tuning process. In this paper, we introduce a novel and effective PEFT paradigm, named SNF (Shortcut adaptation via Normalization Flow), which utilizes normalizing flows to adjust the shortcut layers. We highlight that layers without Lipschitz constraints can lead to error propagation when adapting to downstream datasets. Since modifying the over-parameterized residual connections in these layers is expensive, we focus on adjusting the cheap yet crucial shortcuts. Moreover, learning new information with few parameters in PEFT can be challenging, and information loss can result in label information degradation. To address this issue, we propose an information-preserving normalizing flow. Experimental results demonstrate the effectiveness of SNF. Specifically, with only 0.036M parameters, SNF surpasses previous approaches on both the FGVC and VTAB-1k benchmarks using ViT/B-16 as the backbone. The code is available at https://github.com/Wang-Yaoming/SNF


345
Manipulating Transfer Learning for Property Inference

Yulong Tian · Fnu Suya · Anshuman Suri · Fengyuan Xu · David Evans

Transfer learning is a popular method for tuning pretrained (upstream) models for different downstream tasks using limited data and computational resources. We study how an adversary with control over an upstream model used in transfer learning can conduct property inference attacks on a victim’s tuned downstream model. For example, to infer the presence of images of a specific individual in the downstream training set. We demonstrate attacks in which an adversary can manipulate the upstream model to conduct highly effective and specific property inference attacks (AUC score > 0.9), without incurring significant performance loss on the main task. The main idea of the manipulation is to make the upstream model generate activations (intermediate features) with different distributions for samples with and without a target property, thus enabling the adversary to distinguish easily between downstream models trained with and without training examples that have the target property. Our code is available at https://github.com/yulongt23/Transfer-Inference.


346
Highlight
Heterogeneous Continual Learning

Divyam Madaan · Hongxu Yin · Wonmin Byeon · Jan Kautz · Pavlo Molchanov

We propose a novel framework and a solution to tackle the continual learning (CL) problem with changing network architectures. Most CL methods focus on adapting a single architecture to a new task/class by modifying its weights. However, with rapid progress in architecture design, the problem of adapting existing solutions to novel architectures becomes relevant. To address this limitation, we propose Heterogeneous Continual Learning (HCL), where a wide range of evolving network architectures emerge continually together with novel data/tasks. As a solution, we build on top of the distillation family of techniques and modify it to a new setting where a weaker model takes the role of a teacher; meanwhile, a new stronger architecture acts as a student. Furthermore, we consider a setup of limited access to previous data and propose Quick Deep Inversion (QDI) to recover prior task visual features to support knowledge transfer. QDI significantly reduces computational costs compared to previous solutions and improves overall performance. In summary, we propose a new setup for CL with a modified knowledge distillation paradigm and design a quick data inversion method to enhance distillation. Our evaluation of various benchmarks shows a significant improvement on accuracy in comparison to state-of-the-art methods over various networks architectures.


347
Generic-to-Specific Distillation of Masked Autoencoders

Wei Huang · Zhiliang Peng · Li Dong · Furu Wei · Jianbin Jiao · Qixiang Ye

Large vision Transformers (ViTs) driven by self-supervised pre-training mechanisms achieved unprecedented progress. Lightweight ViT models limited by the model capacity, however, benefit little from those pre-training mechanisms. Knowledge distillation defines a paradigm to transfer representations from large (teacher) models to small (student) ones. However, the conventional single-stage distillation easily gets stuck on task-specific transfer, failing to retain the task-agnostic knowledge crucial for model generalization. In this study, we propose generic-to-specific distillation (G2SD), to tap the potential of small ViT models under the supervision of large models pre-trained by masked autoencoders. In generic distillation, decoder of the small model is encouraged to align feature predictions with hidden representations of the large model, so that task-agnostic knowledge can be transferred. In specific distillation, predictions of the small model are constrained to be consistent with those of the large model, to transfer task-specific features which guarantee task performance. With G2SD, the vanilla ViT-Small model respectively achieves 98.7%, 98.1% and 99.3% the performance of its teacher (ViT-Base) for image classification, object detection, and semantic segmentation, setting a solid baseline for two-stage vision distillation. Code will be available at https://github.com/pengzhiliang/G2SD.


348
Towards a Smaller Student: Capacity Dynamic Distillation for Efficient Image Retrieval

Yi Xie · Huaidong Zhang · Xuemiao Xu · Jianqing Zhu · Shengfeng He

Previous Knowledge Distillation based efficient image retrieval methods employ a lightweight network as the student model for fast inference. However, the lightweight student model lacks adequate representation capacity for effective knowledge imitation during the most critical early training period, causing final performance degeneration. To tackle this issue, we propose a Capacity Dynamic Distillation framework, which constructs a student model with editable representation capacity. Specifically, the employed student model is initially a heavy model to fruitfully learn distilled knowledge in the early training epochs, and the student model is gradually compressed during the training. To dynamically adjust the model capacity, our dynamic framework inserts a learnable convolutional layer within each residual block in the student model as the channel importance indicator. The indicator is optimized simultaneously by the image retrieval loss and the compression loss, and a retrieval-guided gradient resetting mechanism is proposed to release the gradient conflict. Extensive experiments show that our method has superior inference speed and accuracy, e.g., on the VeRi-776 dataset, given the ResNet101 as a teacher, our method saves 67.13% model parameters and 65.67% FLOPs without sacrificing accuracy.


349
CafeBoost: Causal Feature Boost To Eliminate Task-Induced Bias for Class Incremental Learning

Benliu Qiu · Hongliang Li · Haitao Wen · Heqian Qiu · Lanxiao Wang · Fanman Meng · Qingbo Wu · Lili Pan

Continual learning requires a model to incrementally learn a sequence of tasks and aims to predict well on all the learned tasks so far, which notoriously suffers from the catastrophic forgetting problem. In this paper, we find a new type of bias appearing in continual learning, coined as task-induced bias. We place continual learning into a causal framework, based on which we find the task-induced bias is reduced naturally by two underlying mechanisms in task and domain incremental learning. However, these mechanisms do not exist in class incremental learning (CIL), in which each task contains a unique subset of classes. To eliminate the task-induced bias in CIL, we devise a causal intervention operation so as to cut off the causal path that causes the task-induced bias, and then implement it as a causal debias module that transforms biased features into unbiased ones. In addition, we propose a training pipeline to incorporate the novel module into existing methods and jointly optimize the entire architecture. Our overall approach does not rely on data replay, and is simple and convenient to plug into existing methods. Extensive empirical study on CIFAR-100 and ImageNet shows that our approach can improve accuracy and reduce forgetting of well-established methods by a large margin.


350
Bilateral Memory Consolidation for Continual Learning

Xing Nie · Shixiong Xu · Xiyan Liu · Gaofeng Meng · Chunlei Huo · Shiming Xiang

Humans are proficient at continuously acquiring and integrating new knowledge. By contrast, deep models forget catastrophically, especially when tackling highly long task sequences. Inspired by the way our brains constantly rewrite and consolidate past recollections, we propose a novel Bilateral Memory Consolidation (BiMeCo) framework that focuses on enhancing memory interaction capabilities. Specifically, BiMeCo explicitly decouples model parameters into short-term memory module and long-term memory module, responsible for representation ability of the model and generalization over all learned tasks, respectively. BiMeCo encourages dynamic interactions between two memory modules by knowledge distillation and momentum-based updating for forming generic knowledge to prevent forgetting. The proposed BiMeCo is parameter-efficient and can be integrated into existing methods seamlessly. Extensive experiments on challenging benchmarks show that BiMeCo significantly improves the performance of existing continual learning methods. For example, combined with the state-of-the-art method CwD, BiMeCo brings in significant gains of around 2% to 6% while using 2x fewer parameters on CIFAR-100 under ResNet-18.


351
NICO++: Towards Better Benchmarking for Domain Generalization

Xingxuan Zhang · Yue He · Renzhe Xu · Han Yu · Zheyan Shen · Peng Cui

Despite the remarkable performance that modern deep neural networks have achieved on independent and identically distributed (I.I.D.) data, they can crash under distribution shifts. Most current evaluation methods for domain generalization (DG) adopt the leave-one-out strategy as a compromise on the limited number of domains. We propose a large-scale benchmark with extensive labeled domains named NICO++ along with more rational evaluation methods for comprehensively evaluating DG algorithms. To evaluate DG datasets, we propose two metrics to quantify covariate shift and concept shift, respectively. Two novel generalization bounds from the perspective of data construction are proposed to prove that limited concept shift and significant covariate shift favor the evaluation capability for generalization. Through extensive experiments, NICO++ shows its superior evaluation capability compared with current DG datasets and its contribution in alleviating unfairness caused by the leak of oracle knowledge in model selection.


352
DART: Diversify-Aggregate-Repeat Training Improves Generalization of Neural Networks

Samyak Jain · Sravanti Addepalli · Pawan Kumar Sahu · Priyam Dey · R. Venkatesh Babu

Generalization of Neural Networks is crucial for deploying them safely in the real world. Common training strategies to improve generalization involve the use of data augmentations, ensembling and model averaging. In this work, we first establish a surprisingly simple but strong benchmark for generalization which utilizes diverse augmentations within a training minibatch, and show that this can learn a more balanced distribution of features. Further, we propose Diversify-Aggregate-Repeat Training (DART) strategy that first trains diverse models using different augmentations (or domains) to explore the loss basin, and further Aggregates their weights to combine their expertise and obtain improved generalization. We find that Repeating the step of Aggregation throughout training improves the overall optimization trajectory and also ensures that the individual models have sufficiently low loss barrier to obtain improved generalization on combining them. We theoretically justify the proposed approach and show that it indeed generalizes better. In addition to improvements in In-Domain generalization, we demonstrate SOTA performance on the Domain Generalization benchmarks in the popular DomainBed framework as well. Our method is generic and can easily be integrated with several base training algorithms to achieve performance gains. Our code is available here: https://github.com/val-iisc/DART.


353
Differentiable Architecture Search With Random Features

Xuanyang Zhang · Yonggang Li · Xiangyu Zhang · Yongtao Wang · Jian Sun

Differentiable architecture search (DARTS) has significantly promoted the development of NAS techniques because of its high search efficiency and effectiveness but suffers from performance collapse. In this paper, we make efforts to alleviate the performance collapse problem for DARTS from two aspects. First, we investigate the expressive power of the supernet in DARTS and then derive a new setup of DARTS paradigm with only training BatchNorm. Second, we theoretically find that random features dilute the auxiliary connection role of skip-connection in supernet optimization and enable search algorithm focus on fairer operation selection, thereby solving the performance collapse problem. We instantiate DARTS and PC-DARTS with random features to build an improved version for each named RF-DARTS and RF-PCDARTS respectively. Experimental results show that RF-DARTS obtains 94.36% test accuracy on CIFAR-10 (which is the nearest optimal result in NAS-Bench-201), and achieves the newest state-of-the-art top-1 test error of 24.0% on ImageNet when transferring from CIFAR-10. Moreover, RF-DARTS performs robustly across three datasets (CIFAR-10, CIFAR-100, and SVHN) and four search spaces (S1-S4). Besides, RF-PCDARTS achieves even better results on ImageNet, that is, 23.9% top-1 and 7.1% top-5 test error, surpassing representative methods like single-path, training-free, and partial-channel paradigms directly searched on ImageNet.


354
Class Adaptive Network Calibration

Bingyuan Liu · Jérôme Rony · Adrian Galdran · Jose Dolz · Ismail Ben Ayed

Recent studies have revealed that, beyond conventional accuracy, calibration should also be considered for training modern deep neural networks. To address miscalibration during learning, some methods have explored different penalty functions as part of the learning objective, alongside a standard classification loss, with a hyper-parameter controlling the relative contribution of each term. Nevertheless, these methods share two major drawbacks: 1) the scalar balancing weight is the same for all classes, hindering the ability to address different intrinsic difficulties or imbalance among classes; and 2) the balancing weight is usually fixed without an adaptive strategy, which may prevent from reaching the best compromise between accuracy and calibration, and requires hyper-parameter search for each application. We propose Class Adaptive Label Smoothing (CALS) for calibrating deep networks, which allows to learn class-wise multipliers during training, yielding a powerful alternative to common label smoothing penalties. Our method builds on a general Augmented Lagrangian approach, a well-established technique in constrained optimization, but we introduce several modifications to tailor it for large-scale, class-adaptive training. Comprehensive evaluation and multiple comparisons on a variety of benchmarks, including standard and long-tailed image classification, semantic segmentation, and text classification, demonstrate the superiority of the proposed method. The code is available at https://github.com/by-liu/CALS.


355
Meta-Learning With a Geometry-Adaptive Preconditioner

Suhyun Kang · Duhun Hwang · Moonjung Eo · Taesup Kim · Wonjong Rhee

Model-agnostic meta-learning (MAML) is one of the most successful meta-learning algorithms. It has a bi-level optimization structure where the outer-loop process learns a shared initialization and the inner-loop process optimizes task-specific weights. Although MAML relies on the standard gradient descent in the inner-loop, recent studies have shown that controlling the inner-loop’s gradient descent with a meta-learned preconditioner can be beneficial. Existing preconditioners, however, cannot simultaneously adapt in a task-specific and path-dependent way. Additionally, they do not satisfy the Riemannian metric condition, which can enable the steepest descent learning with preconditioned gradient. In this study, we propose Geometry-Adaptive Preconditioned gradient descent (GAP) that can overcome the limitations in MAML; GAP can efficiently meta-learn a preconditioner that is dependent on task-specific parameters, and its preconditioner can be shown to be a Riemannian metric. Thanks to the two properties, the geometry-adaptive preconditioner is effective for improving the inner-loop optimization. Experiment results show that GAP outperforms the state-of-the-art MAML family and preconditioned gradient descent-MAML (PGD-MAML) family in a variety of few-shot learning tasks. Code is available at: https://github.com/Suhyun777/CVPR23-GAP.


356
DepGraph: Towards Any Structural Pruning

Gongfan Fang · Xinyin Ma · Mingli Song · Michael Bi Mi · Xinchao Wang

Structural pruning enables model acceleration by removing structurally-grouped parameters from neural networks. However, the parameter-grouping patterns vary widely across different models, making architecture-specific pruners, which rely on manually-designed grouping schemes, non-generalizable to new architectures. In this work, we study a highly-challenging yet barely-explored task, any structural pruning, to tackle general structural pruning of arbitrary architecture like CNNs, RNNs, GNNs and Transformers. The most prominent obstacle towards this goal lies in the structural coupling, which not only forces different layers to be pruned simultaneously, but also expects all removed parameters to be consistently unimportant, thereby avoiding structural issues and significant performance degradation after pruning. To address this problem, we propose a general and {fully automatic} method, Dependency Graph (DepGraph), to explicitly model the dependency between layers and comprehensively group coupled parameters for pruning. In this work, we extensively evaluate our method on several architectures and tasks, including ResNe(X)t, DenseNet, MobileNet and Vision transformer for images, GAT for graph, DGCNN for 3D point cloud, alongside LSTM for language, and demonstrate that, even with a simple norm-based criterion, the proposed method consistently yields gratifying performances.


357
Highlight
Stitchable Neural Networks

Zizheng Pan · Jianfei Cai · Bohan Zhuang

The public model zoo containing enormous powerful pretrained model families (e.g., ResNet/DeiT) has reached an unprecedented scope than ever, which significantly contributes to the success of deep learning. As each model family consists of pretrained models with diverse scales (e.g., DeiT-Ti/S/B), it naturally arises a fundamental question of how to efficiently assemble these readily available models in a family for dynamic accuracy-efficiency trade-offs at runtime. To this end, we present Stitchable Neural Networks (SN-Net), a novel scalable and efficient framework for model deployment. It cheaply produces numerous networks with different complexity and performance trade-offs given a family of pretrained neural networks, which we call anchors. Specifically, SN-Net splits the anchors across the blocks/layers and then stitches them together with simple stitching layers to map the activations from one anchor to another. With only a few epochs of training, SN-Net effectively interpolates between the performance of anchors with varying scales. At runtime, SN-Net can instantly adapt to dynamic resource constraints by switching the stitching positions. Extensive experiments on ImageNet classification demonstrate that SN-Net can obtain on-par or even better performance than many individually trained networks while supporting diverse deployment scenarios. For example, by stitching Swin Transformers, we challenge hundreds of models in Timm model zoo with a single network. We believe this new elastic model framework can serve as a strong baseline for further research in wider communities.


358
Award Candidate
Integral Neural Networks

Kirill Solodskikh · Azim Kurbanov · Ruslan Aydarkhanov · Irina Zhelavskaya · Yury Parfenov · Dehua Song · Stamatios Lefkimmiatis

We introduce a new family of deep neural networks. Instead of the conventional representation of network layers as N-dimensional weight tensors, we use continuous layer representation along the filter and channel dimensions. We call such networks Integral Neural Networks (INNs). In particular, the weights of INNs are represented as continuous functions defined on N-dimensional hypercubes, and the discrete transformations of inputs to the layers are replaced by continuous integration operations, accordingly. During the inference stage, our continuous layers can be converted into the traditional tensor representation via numerical integral quadratures. Such kind of representation allows the discretization of a network to an arbitrary size with various discretization intervals for the integral kernels. This approach can be applied to prune the model directly on the edge device while featuring only a small performance loss at high rates of structural pruning without any fine-tuning. To evaluate the practical benefits of our proposed approach, we have conducted experiments using various neural network architectures for multiple tasks. Our reported results show that the proposed INNs achieve the same performance with their conventional discrete counterparts, while being able to preserve approximately the same performance (2 % accuracy loss for ResNet18 on Imagenet) at a high rate (up to 30%) of structural pruning without fine-tuning, compared to 65 % accuracy loss of the conventional pruning methods under the same conditions.


359
Regularization of Polynomial Networks for Image Recognition

Grigorios G. Chrysos · Bohan Wang · Jiankang Deng · Volkan Cevher

Deep Neural Networks (DNNs) have obtained impressive performance across tasks, however they still remain as black boxes, e.g., hard to theoretically analyze. At the same time, Polynomial Networks (PNs) have emerged as an alternative method with a promising performance and improved interpretability but have yet to reach the performance of the powerful DNN baselines. In this work, we aim to close this performance gap. We introduce a class of PNs, which are able to reach the performance of ResNet across a range of six benchmarks. We demonstrate that strong regularization is critical and conduct an extensive study of the exact regularization schemes required to match performance. To further motivate the regularization schemes, we introduce D-PolyNets that achieve a higher-degree of expansion than previously proposed polynomial networks. D-PolyNets are more parameter-efficient while achieving a similar performance as other polynomial networks. We expect that our new models can lead to an understanding of the role of elementwise activation functions (which are no longer required for training PNs). The source code is available at https://github.com/grigorisg9gr/regularized_polynomials.


360
ConvNeXt V2: Co-Designing and Scaling ConvNets With Masked Autoencoders

Sanghyun Woo · Shoubhik Debnath · Ronghang Hu · Xinlei Chen · Zhuang Liu · In So Kweon · Saining Xie

Driven by improved architectures and better representation learning frameworks, the field of visual recognition has enjoyed rapid modernization and performance boost in the early 2020s. For example, modern ConvNets, represented by ConvNeXt models, have demonstrated strong performance across different application scenarios. Like many other architectures, ConvNeXt models were designed under the supervised learning setting with ImageNet labels. It is natural to expect ConvNeXt can also benefit from state-of-the-art self-supervised learning frameworks such as masked autoencoders (MAE), which was originally designed with Transformers. However, we show that simply combining the two designs yields subpar performance. In this paper, we develop an efficient and fully-convolutional masked autoencoder framework. We then upgrade the ConvNeXt architecture with a new Global Response Normalization (GRN) layer. GRN enhances inter-channel feature competition and is crucial for pre-training with masked input. The new model family, dubbed ConvNeXt V2, is a complete training recipe that synergizes both the architectural improvement and the advancement in self-supervised learning. With ConvNeXt V2, we are able to significantly advance pure ConvNets’ performance across different recognition benchmarks including ImageNet classification, ADE20K segmentation and COCO detection. To accommodate different use cases, we provide pre-trained ConvNeXt V2 models of a wide range of complexity: from an efficient 3.7M-parameter Atto model that achieves 76.8% top-1 accuracy on ImageNet, to a 650M Huge model that can reach a state-of-the-art 88.9% accuracy using public training data only.


361
Shortcomings of Top-Down Randomization-Based Sanity Checks for Evaluations of Deep Neural Network Explanations

Alexander Binder · Leander Weber · Sebastian Lapuschkin · Grégoire Montavon · Klaus-Robert Müller · Wojciech Samek

While the evaluation of explanations is an important step towards trustworthy models, it needs to be done carefully, and the employed metrics need to be well-understood. Specifically model randomization testing can be overinterpreted if regarded as a primary criterion for selecting or discarding explanation methods. To address shortcomings of this test, we start by observing an experimental gap in the ranking of explanation methods between randomization-based sanity checks [1] and model output faithfulness measures (e.g. [20]). We identify limitations of model-randomization-based sanity checks for the purpose of evaluating explanations. Firstly, we show that uninformative attribution maps created with zero pixel-wise covariance easily achieve high scores in this type of checks. Secondly, we show that top-down model randomization preserves scales of forward pass activations with high probability. That is, channels with large activations have a high probility to contribute strongly to the output, even after randomization of the network on top of them. Hence, explanations after randomization can only be expected to differ to a certain extent. This explains the observed experimental gap. In summary, these results demonstrate the inadequacy of model-randomization-based sanity checks as a criterion to rank attribution methods.


362
Don’t Lie to Me! Robust and Efficient Explainability With Verified Perturbation Analysis

Thomas Fel · Melanie Ducoffe · David Vigouroux · Rémi Cadène · Mikaël Capelle · Claire Nicodème · Thomas Serre

A variety of methods have been proposed to try to explain how deep neural networks make their decisions. Key to those approaches is the need to sample the pixel space efficiently in order to derive importance maps. However, it has been shown that the sampling methods used to date introduce biases and other artifacts, leading to inaccurate estimates of the importance of individual pixels and severely limit the reliability of current explainability methods. Unfortunately, the alternative -- to exhaustively sample the image space is computationally prohibitive. In this paper, we introduce EVA (Explaining using Verified perturbation Analysis) -- the first explainability method guarantee to have an exhaustive exploration of a perturbation space. Specifically, we leverage the beneficial properties of verified perturbation analysis -- time efficiency, tractability and guaranteed complete coverage of a manifold -- to efficiently characterize the input variables that are most likely to drive the model decision. We evaluate the approach systematically and demonstrate state-of-the-art results on multiple benchmarks.


363
OT-Filter: An Optimal Transport Filter for Learning With Noisy Labels

Chuanwen Feng · Yilong Ren · Xike Xie

The success of deep learning is largely attributed to the training over clean data. However, data is often coupled with noisy labels in practice. Learning with noisy labels is challenging because the performance of the deep neural networks (DNN) drastically degenerates, due to confirmation bias caused by the network memorization over noisy labels. To alleviate that, a recent prominent direction is on sample selection, which retrieves clean data samples from noisy samples, so as to enhance the model’s robustness and tolerance to noisy labels. In this paper, we revamp the sample selection from the perspective of optimal transport theory and propose a novel method, called the OT-Filter. The OT-Filter provides geometrically meaningful distances and preserves distribution patterns to measure the data discrepancy, thus alleviating the confirmation bias. Extensive experiments on benchmarks, such as Clothing1M and ANIMAL-10N, show that the performance of the OT- Filter outperforms its counterparts. Meanwhile, results on benchmarks with synthetic labels, such as CIFAR-10/100, show the superiority of the OT-Filter in handling data labels of high noise.


364
Robust Generalization Against Photon-Limited Corruptions via Worst-Case Sharpness Minimization

Zhuo Huang · Miaoxi Zhu · Xiaobo Xia · Li Shen · Jun Yu · Chen Gong · Bo Han · Bo Du · Tongliang Liu

Robust generalization aims to tackle the most challenging data distributions which are rare in the training set and contain severe noises, i.e., photon-limited corruptions. Common solutions such as distributionally robust optimization (DRO) focus on the worst-case empirical risk to ensure low training error on the uncommon noisy distributions. However, due to the over-parameterized model being optimized on scarce worst-case data, DRO fails to produce a smooth loss landscape, thus struggling on generalizing well to the test set. Therefore, instead of focusing on the worst-case risk minimization, we propose SharpDRO by penalizing the sharpness of the worst-case distribution, which measures the loss changes around the neighbor of learning parameters. Through worst-case sharpness minimization, the proposed method successfully produces a flat loss curve on the corrupted distributions, thus achieving robust generalization. Moreover, by considering whether the distribution annotation is available, we apply SharpDRO to two problem settings and design a worst-case selection process for robust generalization. Theoretically, we show that SharpDRO has a great convergence guarantee. Experimentally, we simulate photon-limited corruptions using CIFAR10/100 and ImageNet30 datasets and show that SharpDRO exhibits a strong generalization ability against severe corruptions and exceeds well-known baseline methods with large performance gains.


365
Learning With Noisy Labels via Self-Supervised Adversarial Noisy Masking

Yuanpeng Tu · Boshen Zhang · Yuxi Li · Liang Liu · Jian Li · Jiangning Zhang · Yabiao Wang · Chengjie Wang · Cai Rong Zhao

Collecting large-scale datasets is crucial for training deep models, annotating the data, however, inevitably yields noisy labels, which poses challenges to deep learning algorithms. Previous efforts tend to mitigate this problem via identifying and removing noisy samples or correcting their labels according to the statistical properties (e.g., loss values) among training samples. In this paper, we aim to tackle this problem from a new perspective, delving into the deep feature maps, we empirically find that models trained with clean and mislabeled samples manifest distinguishable activation feature distributions. From this observation, a novel robust training approach termed adversarial noisy masking is proposed. The idea is to regularize deep features with a label quality guided masking scheme, which adaptively modulates the input data and label simultaneously, preventing the model to overfit noisy samples. Further, an auxiliary task is designed to reconstruct input data, it naturally provides noise-free self-supervised signals to reinforce the generalization ability of deep models. The proposed method is simple and flexible, it is tested on both synthetic and real-world noisy datasets, where significant improvements are achieved over previous state-of-the-art methods.


366
Bit-Shrinking: Limiting Instantaneous Sharpness for Improving Post-Training Quantization

Chen Lin · Bo Peng · Zheyang Li · Wenming Tan · Ye Ren · Jun Xiao · Shiliang Pu

Post-training quantization (PTQ) is an effective compression method to reduce the model size and computational cost. However, quantizing a model into a low-bit one, e.g., lower than 4, is difficult and often results in nonnegligible performance degradation. To address this, we investigate the loss landscapes of quantized networks with various bit-widths. We show that the network with more ragged loss surface, is more easily trapped into bad local minima, which mostly appears in low-bit quantization. A deeper analysis indicates, the ragged surface is caused by the injection of excessive quantization noise. To this end, we detach a sharpness term from the loss which reflects the impact of quantization noise. To smooth the rugged loss surface, we propose to limit the sharpness term small and stable during optimization. Instead of directly optimizing the target bit network, the bit-width of quantized network has a self-adapted shrinking scheduler in continuous domain from high bit-width to the target by limiting the increasing sharpness term within a proper range. It can be viewed as iteratively adding small “instant” quantization noise and adjusting the network to eliminate its impact. Widely experiments including classification and detection tasks demonstrate the effectiveness of the Bit-shrinking strategy in PTQ. On the Vision Transformer models, our INT8 and INT6 models drop within 0.5% and 1.5% Top-1 accuracy, respectively. On the traditional CNN networks, our INT4 quantized models drop within 1.3% and 3.5% Top-1 accuracy on ResNet18 and MobileNetV2 without fine-tuning, which achieves the state-of-the-art performance.


367
Enhancing Multiple Reliability Measures via Nuisance-Extended Information Bottleneck

Jongheon Jeong · Sihyun Yu · Hankook Lee · Jinwoo Shin

In practical scenarios where training data is limited, many predictive signals in the data can be rather from some biases in data acquisition (i.e., less generalizable), so that one cannot prevent a model from co-adapting on such (so-called) “shortcut” signals: this makes the model fragile in various distribution shifts. To bypass such failure modes, we consider an adversarial threat model under a mutual information constraint to cover a wider class of perturbations in training. This motivates us to extend the standard information bottleneck to additionally model the nuisance information. We propose an autoencoder-based training to implement the objective, as well as practical encoder designs to facilitate the proposed hybrid discriminative-generative training concerning both convolutional- and Transformer-based architectures. Our experimental results show that the proposed scheme improves robustness of learned representations (remarkably without using any domain-specific knowledge), with respect to multiple challenging reliability measures. For example, our model could advance the state-of-the-art on a recent challenging OBJECTS benchmark in novelty detection by 78.4% -> 87.2% in AUROC, while simultaneously enjoying improved corruption, background and (certified) adversarial robustness. Code is available at https://github.com/jh-jeong/nuisance_ib.


368
AdaptiveMix: Improving GAN Training via Feature Space Shrinkage

Haozhe Liu · Wentian Zhang · Bing Li · Haoqian Wu · Nanjun He · Yawen Huang · Yuexiang Li · Bernard Ghanem · Yefeng Zheng

Due to the outstanding capability for data generation, Generative Adversarial Networks (GANs) have attracted considerable attention in unsupervised learning. However, training GANs is difficult, since the training distribution is dynamic for the discriminator, leading to unstable image representation. In this paper, we address the problem of training GANs from a novel perspective, i.e., robust image classification. Motivated by studies on robust image representation, we propose a simple yet effective module, namely AdaptiveMix, for GANs, which shrinks the regions of training data in the image representation space of the discriminator. Considering it is intractable to directly bound feature space, we propose to construct hard samples and narrow down the feature distance between hard and easy samples. The hard samples are constructed by mixing a pair of training images. We evaluate the effectiveness of our AdaptiveMix with widely-used and state-of-the-art GAN architectures. The evaluation results demonstrate that our AdaptiveMix can facilitate the training of GANs and effectively improve the image quality of generated samples. We also show that our AdaptiveMix can be further applied to image classification and Out-Of-Distribution (OOD) detection tasks, by equipping it with state-of-the-art methods. Extensive experiments on seven publicly available datasets show that our method effectively boosts the performance of baselines. The code is publicly available at https://github.com/WentianZhang-ML/AdaptiveMix.


369
Re-GAN: Data-Efficient GANs Training via Architectural Reconfiguration

Divya Saxena · Jiannong Cao · Jiahao Xu · Tarun Kulshrestha

Training Generative Adversarial Networks (GANs) on high-fidelity images usually requires a vast number of training images. Recent research on GAN tickets reveals that dense GANs models contain sparse sub-networks or “lottery tickets” that, when trained separately, yield better results under limited data. However, finding GANs tickets requires an expensive process of train-prune-retrain. In this paper, we propose Re-GAN, a data-efficient GANs training that dynamically reconfigures GANs architecture during training to explore different sub-network structures in training time. Our method repeatedly prunes unimportant connections to regularize GANs network and regrows them to reduce the risk of prematurely pruning important connections. Re-GAN stabilizes the GANs models with less data and offers an alternative to the existing GANs tickets and progressive growing methods. We demonstrate that Re-GAN is a generic training methodology which achieves stability on datasets of varying sizes, domains, and resolutions (CIFAR-10, Tiny-ImageNet, and multiple few-shot generation datasets) as well as different GANs architectures (SNGAN, ProGAN, StyleGAN2 and AutoGAN). Re-GAN also improves performance when combined with the recent augmentation approaches. Moreover, Re-GAN requires fewer floating-point operations (FLOPs) and less training time by removing the unimportant connections during GANs training while maintaining comparable or even generating higher-quality samples. When compared to state-of-the-art StyleGAN2, our method outperforms without requiring any additional fine-tuning step. Code can be found at this link: https://github.com/IntellicentAI-Lab/Re-GAN


370
Soft Augmentation for Image Classification

Yang Liu · Shen Yan · Laura Leal-Taixé · James Hays · Deva Ramanan

Modern neural networks are over-parameterized and thus rely on strong regularization such as data augmentation and weight decay to reduce overfitting and improve generalization. The dominant form of data augmentation applies invariant transforms, where the learning target of a sample is invariant to the transform applied to that sample. We draw inspiration from human visual classification studies and propose generalizing augmentation with invariant transforms to soft augmentation where the learning target softens non-linearly as a function of the degree of the transform applied to the sample: e.g., more aggressive image crop augmentations produce less confident learning targets. We demonstrate that soft targets allow for more aggressive data augmentation, offer more robust performance boosts, work with other augmentation policies, and interestingly, produce better calibrated models (since they are trained to be less confident on aggressively cropped/occluded examples). Combined with existing aggressive augmentation strategies, soft targets 1) double the top-1 accuracy boost across Cifar-10, Cifar-100, ImageNet-1K, and ImageNet-V2, 2) improve model occlusion performance by up to 4x, and 3) half the expected calibration error (ECE). Finally, we show that soft augmentation generalizes to self-supervised classification tasks.


371
Boosting Verified Training for Robust Image Classifications via Abstraction

Zhaodi Zhang · Zhiyi Xue · Yang Chen · Si Liu · Yueling Zhang · Jing Liu · Min Zhang

This paper proposes a novel, abstraction-based, certified training method for robust image classifiers. Via abstraction, all perturbed images are mapped into intervals before feeding into neural networks for training. By training on intervals, all the perturbed images that are mapped to the same interval are classified as the same label, rendering the variance of training sets to be small and the loss landscape of the models to be smooth. Consequently, our approach significantly improves the robustness of trained models. For the abstraction, our training method also enables a sound and complete black-box verification approach, which is orthogonal and scalable to arbitrary types of neural networks regardless of their sizes and architectures. We evaluate our method on a wide range of benchmarks in different scales. The experimental results show that our method outperforms state of the art by (i) reducing the verified errors of trained models up to 95.64%; (ii) totally achieving up to 602.50x speedup; and (iii) scaling up to larger models with up to 138 million trainable parameters. The demo is available at https://github.com/zhangzhaodi233/ABSCERT.git.


372
A New Dataset Based on Images Taken by Blind People for Testing the Robustness of Image Classification Models Trained for ImageNet Categories

Reza Akbarian Bafghi · Danna Gurari

Our goal is to improve upon the status quo for designing image classification models trained in one domain that perform well on images from another domain. Complementing existing work in robustness testing, we introduce the first dataset for this purpose which comes from an authentic use case where photographers wanted to learn about the content in their images. We built a new test set using 8,900 images taken by people who are blind for which we collected metadata to indicate the presence versus absence of 200 ImageNet object categories. We call this dataset VizWiz-Classification. We characterize this dataset and how it compares to the mainstream datasets for evaluating how well ImageNet-trained classification models generalize. Finally, we analyze the performance of 100 ImageNet classification models on our new test dataset. Our fine-grained analysis demonstrates that these models struggle on images with quality issues. To enable future extensions to this work, we share our new dataset with evaluation server at: https://vizwiz.org/tasks-and-datasets/image-classification


373
Exploiting Completeness and Uncertainty of Pseudo Labels for Weakly Supervised Video Anomaly Detection

Chen Zhang · Guorong Li · Yuankai Qi · Shuhui Wang · Laiyun Qing · Qingming Huang · Ming-Hsuan Yang

Weakly supervised video anomaly detection aims to identify abnormal events in videos using only video-level labels. Recently, two-stage self-training methods have achieved significant improvements by self-generating pseudo labels and self-refining anomaly scores with these labels. As the pseudo labels play a crucial role, we propose an enhancement framework by exploiting completeness and uncertainty properties for effective self-training. Specifically, we first design a multi-head classification module (each head serves as a classifier) with a diversity loss to maximize the distribution differences of predicted pseudo labels across heads. This encourages the generated pseudo labels to cover as many abnormal events as possible. We then devise an iterative uncertainty pseudo label refinement strategy, which improves not only the initial pseudo labels but also the updated ones obtained by the desired classifier in the second stage. Extensive experimental results demonstrate the proposed method performs favorably against state-of-the-art approaches on the UCF-Crime, TAD, and XD-Violence benchmark datasets.


374
Prototypical Residual Networks for Anomaly Detection and Localization

Hui Zhang · Zuxuan Wu · Zheng Wang · Zhineng Chen · Yu-Gang Jiang

Anomaly detection and localization are widely used in industrial manufacturing for its efficiency and effectiveness. Anomalies are rare and hard to collect and supervised models easily over-fit to these seen anomalies with a handful of abnormal samples, producing unsatisfactory performance. On the other hand, anomalies are typically subtle, hard to discern, and of various appearance, making it difficult to detect anomalies and let alone locate anomalous regions. To address these issues, we propose a framework called Prototypical Residual Network (PRN), which learns feature residuals of varying scales and sizes between anomalous and normal patterns to accurately reconstruct the segmentation maps of anomalous regions. PRN mainly consists of two parts: multi-scale prototypes that explicitly represent the residual features of anomalies to normal patterns; a multi-size self-attention mechanism that enables variable-sized anomalous feature learning. Besides, we present a variety of anomaly generation strategies that consider both seen and unseen appearance variance to enlarge and diversify anomalies. Extensive experiments on the challenging and widely used MVTec AD benchmark show that PRN outperforms current state-of-the-art unsupervised and supervised methods. We further report SOTA results on three additional datasets to demonstrate the effectiveness and generalizability of PRN.


375
Class Balanced Adaptive Pseudo Labeling for Federated Semi-Supervised Learning

Ming Li · Qingli Li · Yan Wang

This paper focuses on federated semi-supervised learning (FSSL), assuming that few clients have fully labeled data (labeled clients) and the training datasets in other clients are fully unlabeled (unlabeled clients). Existing methods attempt to deal with the challenges caused by not independent and identically distributed data (Non-IID) setting. Though methods such as sub-consensus models have been proposed, they usually adopt standard pseudo labeling or consistency regularization on unlabeled clients which can be easily influenced by imbalanced class distribution. Thus, problems in FSSL are still yet to be solved. To seek for a fundamental solution to this problem, we present Class Balanced Adaptive Pseudo Labeling (CBAFed), to study FSSL from the perspective of pseudo labeling. In CBAFed, the first key element is a fixed pseudo labeling strategy to handle the catastrophic forgetting problem, where we keep a fixed set by letting pass information of unlabeled data at the beginning of the unlabeled client training in each communication round. The second key element is that we design class balanced adaptive thresholds via considering the empirical distribution of all training data in local clients, to encourage a balanced training process. To make the model reach a better optimum, we further propose a residual weight connection in local supervised training and global model aggregation. Extensive experiments on five datasets demonstrate the superiority of CBAFed. Code will be released.


376
Fair Federated Medical Image Segmentation via Client Contribution Estimation

Meirui Jiang · Holger R. Roth · Wenqi Li · Dong Yang · Can Zhao · Vishwesh Nath · Daguang Xu · Qi Dou · Ziyue Xu

How to ensure fairness is an important topic in federated learning (FL). Recent studies have investigated how to reward clients based on their contribution (collaboration fairness), and how to achieve uniformity of performance across clients (performance fairness). Despite achieving progress on either one, we argue that it is critical to consider them together, in order to engage and motivate more diverse clients joining FL to derive a high-quality global model. In this work, we propose a novel method to optimize both types of fairness simultaneously. Specifically, we propose to estimate client contribution in gradient and data space. In gradient space, we monitor the gradient direction differences of each client with respect to others. And in data space, we measure the prediction error on client data using an auxiliary model. Based on this contribution estimation, we propose a FL method, federated training via contribution estimation (FedCE), i.e., using estimation as global model aggregation weights. We have theoretically analyzed our method and empirically evaluated it on two real-world medical datasets. The effectiveness of our approach has been validated with significant performance improvements, better collaboration fairness, better performance fairness, and comprehensive analytical studies.


377
Rethinking Federated Learning With Domain Shift: A Prototype View

Wenke Huang · Mang Ye · Zekun Shi · He Li · Bo Du

Federated learning shows a bright promise as a privacy-preserving collaborative learning technique. However, prevalent solutions mainly focus on all private data sampled from the same domain. An important challenge is that when distributed data are derived from diverse domains. The private model presents degenerative performance on other domains (with domain shift). Therefore, we expect that the global model optimized after the federated learning process stably provides generalizability performance on multiple domains. In this paper, we propose Federated Prototypes Learning (FPL) for federated learning under domain shift. The core idea is to construct cluster prototypes and unbiased prototypes, providing fruitful domain knowledge and a fair convergent target. On the one hand, we pull the sample embedding closer to cluster prototypes belonging to the same semantics than cluster prototypes from distinct classes. On the other hand, we introduce consistency regularization to align the local instance with the respective unbiased prototype. Empirical results on Digits and Office Caltech tasks demonstrate the effectiveness of the proposed solution and the efficiency of crucial modules.


378
FedDM: Iterative Distribution Matching for Communication-Efficient Federated Learning

Yuanhao Xiong · Ruochen Wang · Minhao Cheng · Felix Yu · Cho-Jui Hsieh

Federated learning (FL) has recently attracted increasing attention from academia and industry, with the ultimate goal of achieving collaborative training under privacy and communication constraints. Existing iterative model averaging based FL algorithms require a large number of communication rounds to obtain a well-performed model due to extremely unbalanced and non-i.i.d data partitioning among different clients. Thus, we propose FedDM to build the global training objective from multiple local surrogate functions, which enables the server to gain a more global view of the loss landscape. In detail, we construct synthetic sets of data on each client to locally match the loss landscape from original data through distribution matching. FedDM reduces communication rounds and improves model quality by transmitting more informative and smaller synthesized data compared with unwieldy model weights. We conduct extensive experiments on three image classification datasets, and results show that our method can outperform other FL counterparts in terms of efficiency and model performance. Moreover, we demonstrate that FedDM can be adapted to preserve differential privacy with Gaussian mechanism and train a better model under the same privacy budget.


379
Alias-Free Convnets: Fractional Shift Invariance via Polynomial Activations

Hagay Michaeli · Tomer Michaeli · Daniel Soudry

Although CNNs are believed to be invariant to translations, recent works have shown this is not the case due to aliasing effects that stem from down-sampling layers. The existing architectural solutions to prevent the aliasing effects are partial since they do not solve those effects that originate in non-linearities. We propose an extended anti-aliasing method that tackles both down-sampling and non-linear layers, thus creating truly alias-free, shift-invariant CNNs. We show that the presented model is invariant to integer as well as fractional (i.e., sub-pixel) translations, thus outperforming other shift-invariant methods in terms of robustness to adversarial translations.


380
STDLens: Model Hijacking-Resilient Federated Learning for Object Detection

Ka-Ho Chow · Ling Liu · Wenqi Wei · Fatih Ilhan · Yanzhao Wu

Federated Learning (FL) has been gaining popularity as a collaborative learning framework to train deep learning-based object detection models over a distributed population of clients. Despite its advantages, FL is vulnerable to model hijacking. The attacker can control how the object detection system should misbehave by implanting Trojaned gradients using only a small number of compromised clients in the collaborative learning process. This paper introduces STDLens, a principled approach to safeguarding FL against such attacks. We first investigate existing mitigation mechanisms and analyze their failures caused by the inherent errors in spatial clustering analysis on gradients. Based on the insights, we introduce a three-tier forensic framework to identify and expel Trojaned gradients and reclaim the performance over the course of FL. We consider three types of adaptive attacks and demonstrate the robustness of STDLens against advanced adversaries. Extensive experiments show that STDLens can protect FL against different model hijacking attacks and outperform existing methods in identifying and removing Trojaned gradients with significantly higher precision and much lower false-positive rates. The source code is available at https://github.com/git-disl/STDLens.


381
Detecting Backdoors in Pre-Trained Encoders

Shiwei Feng · Guanhong Tao · Siyuan Cheng · Guangyu Shen · Xiangzhe Xu · Yingqi Liu · Kaiyuan Zhang · Shiqing Ma · Xiangyu Zhang

Self-supervised learning in computer vision trains on unlabeled data, such as images or (image, text) pairs, to obtain an image encoder that learns high-quality embeddings for input data. Emerging backdoor attacks towards encoders expose crucial vulnerabilities of self-supervised learning, since downstream classifiers (even further trained on clean data) may inherit backdoor behaviors from encoders. Existing backdoor detection methods mainly focus on supervised learning settings and cannot handle pre-trained encoders especially when input labels are not available. In this paper, we propose DECREE, the first backdoor detection approach for pre-trained encoders, requiring neither classifier headers nor input labels. We evaluate DECREE on over 400 encoders trojaned under 3 paradigms. We show the effectiveness of our method on image encoders pre-trained on ImageNet and OpenAI’s CLIP 400 million image-text pairs. Our method consistently has a high detection accuracy even if we have only limited or no access to the pre-training dataset.


382
Detecting Backdoors During the Inference Stage Based on Corruption Robustness Consistency

Xiaogeng Liu · Minghui Li · Haoyu Wang · Shengshan Hu · Dengpan Ye · Hai Jin · Libing Wu · Chaowei Xiao

Deep neural networks are proven to be vulnerable to backdoor attacks. Detecting the trigger samples during the inference stage, i.e., the test-time trigger sample detection, can prevent the backdoor from being triggered. However, existing detection methods often require the defenders to have high accessibility to victim models, extra clean data, or knowledge about the appearance of backdoor triggers, limiting their practicality. In this paper, we propose the test-time corruption robustness consistency evaluation (TeCo), a novel test-time trigger sample detection method that only needs the hard-label outputs of the victim models without any extra information. Our journey begins with the intriguing observation that the backdoor-infected models have similar performance across different image corruptions for the clean images, but perform discrepantly for the trigger samples. Based on this phenomenon, we design TeCo to evaluate test-time robustness consistency by calculating the deviation of severity that leads to predictions’ transition across different corruptions. Extensive experiments demonstrate that compared with state-of-the-art defenses, which even require either certain information about the trigger types or accessibility of clean data, TeCo outperforms them on different backdoor attacks, datasets, and model architectures, enjoying a higher AUROC by 10% and 5 times of stability. The code is available at https://github.com/CGCL-codes/TeCo


383
Can’t Steal? Cont-Steal! Contrastive Stealing Attacks Against Image Encoders

Zeyang Sha · Xinlei He · Ning Yu · Michael Backes · Yang Zhang

Self-supervised representation learning techniques have been developing rapidly to make full use of unlabeled images. They encode images into rich features that are oblivious to downstream tasks. Behind their revolutionary representation power, the requirements for dedicated model designs and a massive amount of computation resources expose image encoders to the risks of potential model stealing attacks - a cheap way to mimic the well-trained encoder performance while circumventing the demanding requirements. Yet conventional attacks only target supervised classifiers given their predicted labels and/or posteriors, which leaves the vulnerability of unsupervised encoders unexplored. In this paper, we first instantiate the conventional stealing attacks against encoders and demonstrate their severer vulnerability compared with downstream classifiers. To better leverage the rich representation of encoders, we further propose Cont-Steal, a contrastive-learning-based attack, and validate its improved stealing effectiveness in various experiment settings. As a takeaway, we appeal to our community’s attention to the intellectual property protection of representation learning techniques, especially to the defenses against encoder stealing attacks like ours.


384
Re-Thinking Model Inversion Attacks Against Deep Neural Networks

Ngoc-Bao Nguyen · Keshigeyan Chandrasegaran · Milad Abdollahzadeh · Ngai-Man Cheung

Model inversion (MI) attacks aim to infer and reconstruct private training data by abusing access to a model. MI attacks have raised concerns about the leaking of sensitive information (e.g. private face images used in training a face recognition system). Recently, several algorithms for MI have been proposed to improve the attack performance. In this work, we revisit MI, study two fundamental issues pertaining to all state-of-the-art (SOTA) MI algorithms, and propose solutions to these issues which lead to a significant boost in attack performance for all SOTA MI. In particular, our contributions are two-fold: 1) We analyze the optimization objective of SOTA MI algorithms, argue that the objective is sub-optimal for achieving MI, and propose an improved optimization objective that boosts attack performance significantly. 2) We analyze “MI overfitting”, show that it would prevent reconstructed images from learning semantics of training data, and propose a novel “model augmentation” idea to overcome this issue. Our proposed solutions are simple and improve all SOTA MI attack accuracy significantly. E.g., in the standard CelebA benchmark, our solutions improve accuracy by 11.8% and achieve for the first time over 90% attack accuracy. Our findings demonstrate that there is a clear risk of leaking sensitive information from deep learning models. We urge serious consideration to be given to the privacy implications. Our code, demo, and models are available at https://ngoc-nguyen-0.github.io/re-thinkingmodelinversion_attacks/


385
Turning Strengths Into Weaknesses: A Certified Robustness Inspired Attack Framework Against Graph Neural Networks

Binghui Wang · Meng Pang · Yun Dong

Graph neural networks (GNNs) have achieved state-of-the-art performance in many graph-related tasks such as node classification. However, recent studies show that GNNs are vulnerable to both test-time and training-time attacks that perturb the graph structure. While the existing attack methods have shown promising attack performance, we would like to design an attack framework that can significantly enhance both the existing evasion and poisoning attacks. In particular, our attack framework is inspired by certified robustness. Certified robustness was originally used by defenders to defend against adversarial attacks. We are the first, from the attacker perspective, to leverage its properties to better attack GNNs. Specifically, we first leverage and derive nodes’ certified perturbation sizes against evasion and poisoning attacks based on randomized smoothing. A larger certified perturbation size of a node indicates this node is theoretically more robust to graph perturbations. Such a property motivates us to focus more on nodes with smaller certified perturbation sizes, as they are easier to be attacked after graph perturbations. Accordingly, we design a certified robustness inspired attack loss, when incorporated into (any) existing attacks, produces our certified robustness inspired attack framework. We apply our attack framework to the existing attacks and results show it can significantly enhance the existing attacks’ performance.


386
Dynamic Generative Targeted Attacks With Pattern Injection

Weiwei Feng · Nanqing Xu · Tianzhu Zhang · Yongdong Zhang

Adversarial attacks can evaluate model robustness and have been of great concerns in recent years. Among various attacks, targeted attacks aim at misleading victim models to output adversary-desired predictions, which are more challenging and threatening than untargeted ones. Existing targeted attacks can be roughly divided into instancespecific and instance-agnostic attacks. Instance-specific attacks craft adversarial examples via iterative gradient updating on the specific instance. In contrast, instanceagnostic attacks learn a universal perturbation or a generative model on the global dataset to perform attacks. However they rely too much on the classification boundary of substitute models, ignoring the realistic distribution of target class, which may result in limited targeted attack performance. And there is no attempt to simultaneously combine the information of the specific instance and the global dataset. To deal with these limitations, we first conduct an analysis via a causal graph and propose to craft transferable targeted adversarial examples by injecting target patterns. Based on this analysis, we introduce a generative attack model composed of a cross-attention guided convolution module and a pattern injection module. Concretely, the former adopts a dynamic convolution kernel and a static convolution kernel for the specific instance and the global dataset, respectively, which can inherit the advantages of both instance-specific and instance-agnostic attacks. And the pattern injection module utilizes a pattern prototype to encode target patterns, which can guide the generation of targeted adversarial examples. Besides, we also provide rigorous theoretical analysis to guarantee the effectiveness of our method. Extensive experiments demonstrate that our method show superior performance than 10 existing adversarial attacks against 13 models.


387
Transferable Adversarial Attacks on Vision Transformers With Token Gradient Regularization

Jianping Zhang · Yizhan Huang · Weibin Wu · Michael R. Lyu

Vision transformers (ViTs) have been successfully deployed in a variety of computer vision tasks, but they are still vulnerable to adversarial samples. Transfer-based attacks use a local model to generate adversarial samples and directly transfer them to attack a target black-box model. The high efficiency of transfer-based attacks makes it a severe security threat to ViT-based applications. Therefore, it is vital to design effective transfer-based attacks to identify the deficiencies of ViTs beforehand in security-sensitive scenarios. Existing efforts generally focus on regularizing the input gradients to stabilize the updated direction of adversarial samples. However, the variance of the back-propagated gradients in intermediate blocks of ViTs may still be large, which may make the generated adversarial samples focus on some model-specific features and get stuck in poor local optima. To overcome the shortcomings of existing approaches, we propose the Token Gradient Regularization (TGR) method. According to the structural characteristics of ViTs, TGR reduces the variance of the back-propagated gradient in each internal block of ViTs in a token-wise manner and utilizes the regularized gradient to generate adversarial samples. Extensive experiments on attacking both ViTs and CNNs confirm the superiority of our approach. Notably, compared to the state-of-the-art transfer-based attacks, our TGR offers a performance improvement of 8.8 % on average.


388
Adversarial Counterfactual Visual Explanations

Guillaume Jeanneret · Loïc Simon · Frédéric Jurie

Counterfactual explanations and adversarial attacks have a related goal: flipping output labels with minimal perturbations regardless of their characteristics. Yet, adversarial attacks cannot be used directly in a counterfactual explanation perspective, as such perturbations are perceived as noise and not as actionable and understandable image modifications. Building on the robust learning literature, this paper proposes an elegant method to turn adversarial attacks into semantically meaningful perturbations, without modifying the classifiers to explain. The proposed approach hypothesizes that Denoising Diffusion Probabilistic Models are excellent regularizers for avoiding high-frequency and out-of-distribution perturbations when generating adversarial attacks. The paper’s key idea is to build attacks through a diffusion model to polish them. This allows studying the target model regardless of its robustification level. Extensive experimentation shows the advantages of our counterfactual explanation approach over current State-of-the-Art in multiple testbeds.


389
TWINS: A Fine-Tuning Framework for Improved Transferability of Adversarial Robustness and Generalization

Ziquan Liu · Yi Xu · Xiangyang Ji · Antoni B. Chan

Recent years have seen the ever-increasing importance of pre-trained models and their downstream training in deep learning research and applications. At the same time, the defense for adversarial examples has been mainly investigated in the context of training from random initialization on simple classification tasks. To better exploit the potential of pre-trained models in adversarial robustness, this paper focuses on the fine-tuning of an adversarially pre-trained model in various classification tasks. Existing research has shown that since the robust pre-trained model has already learned a robust feature extractor, the crucial question is how to maintain the robustness in the pre-trained model when learning the downstream task. We study the model-based and data-based approaches for this goal and find that the two common approaches cannot achieve the objective of improving both generalization and adversarial robustness. Thus, we propose a novel statistics-based approach, Two-WIng NormliSation (TWINS) fine-tuning framework, which consists of two neural networks where one of them keeps the population means and variances of pre-training data in the batch normalization layers. Besides the robust information transfer, TWINS increases the effective learning rate without hurting the training stability since the relationship between a weight norm and its gradient norm in standard batch normalization layer is broken, resulting in a faster escape from the sub-optimal initialization and alleviating the robust overfitting. Finally, TWINS is shown to be effective on a wide range of image classification datasets in terms of both generalization and robustness.


390
Randomized Adversarial Training via Taylor Expansion

Gaojie Jin · Xinping Yi · Dengyu Wu · Ronghui Mu · Xiaowei Huang

In recent years, there has been an explosion of research into developing more robust deep neural networks against adversarial examples. Adversarial training appears as one of the most successful methods. To deal with both the robustness against adversarial examples and the accuracy over clean examples, many works develop enhanced adversarial training methods to achieve various trade-offs between them. Leveraging over the studies that smoothed update on weights during training may help find flat minima and improve generalization, we suggest reconciling the robustness-accuracy trade-off from another perspective, i.e., by adding random noise into deterministic weights. The randomized weights enable our design of a novel adversarial training method via Taylor expansion of a small Gaussian noise, and we show that the new adversarial training method can flatten loss landscape and find flat minima. With PGD, CW, and Auto Attacks, an extensive set of experiments demonstrate that our method enhances the state-of-the-art adversarial training methods, boosting both robustness and clean accuracy. The code is available at https://github.com/Alexkael/Randomized-Adversarial-Training.


391
Highlight
Improving Robust Generalization by Direct PAC-Bayesian Bound Minimization

Zifan Wang · Nan Ding · Tomer Levinboim · Xi Chen · Radu Soricut

Recent research in robust optimization has shown an overfitting-like phenomenon in which models trained against adversarial attacks exhibit higher robustness on the training set compared to the test set. Although previous work provided theoretical explanations for this phenomenon using a robust PAC-Bayesian bound over the adversarial test error, related algorithmic derivations are at best only loosely connected to this bound, which implies that there is still a gap between their empirical success and our understanding of adversarial robustness theory. To close this gap, in this paper we consider a different form of the robust PAC-Bayesian bound and directly minimize it with respect to the model posterior. The derivation of the optimal solution connects PAC-Bayesian learning to the geometry of the robust loss surface through a Trace of Hessian (TrH) regularizer that measures the surface flatness. In practice, we restrict the TrH regularizer to the top layer only, which results in an analytical solution to the bound whose computational cost does not depend on the network depth. Finally, we evaluate our TrH regularization approach over CIFAR-10/100 and ImageNet using Vision Transformers (ViT) and compare against baseline adversarial robustness algorithms. Experimental results show that TrH regularization leads to improved ViT robustness that either matches or surpasses previous state-of-the-art approaches while at the same time requires less memory and computational cost.


392
Evading Forensic Classifiers With Attribute-Conditioned Adversarial Faces

Fahad Shamshad · Koushik Srivatsan · Karthik Nandakumar

The ability of generative models to produce highly realistic synthetic face images has raised security and ethical concerns. As a first line of defense against such fake faces, deep learning based forensic classifiers have been developed. While these forensic models can detect whether a face image is synthetic or real with high accuracy, they are also vulnerable to adversarial attacks. Although such attacks can be highly successful in evading detection by forensic classifiers, they introduce visible noise patterns that are detectable through careful human scrutiny. Additionally, these attacks assume access to the target model(s) which may not always be true. Attempts have been made to directly perturb the latent space of GANs to produce adversarial fake faces that can circumvent forensic classifiers. In this work, we go one step further and show that it is possible to successfully generate adversarial fake faces with a specified set of attributes (e.g., hair color, eye size, race, gender, etc.). To achieve this goal, we leverage the state-of-the-art generative model StyleGAN with disentangled representations, which enables a range of modifications without leaving the manifold of natural images. We propose a framework to search for adversarial latent codes within the feature space of StyleGAN, where the search can be guided either by a text prompt or a reference image. We also propose a meta-learning based optimization strategy to achieve transferable performance on unknown target models. Extensive experiments demonstrate that the proposed approach can produce semantically manipulated adversarial fake faces, which are true to the specified attribute set and can successfully fool forensic face classifiers, while remaining undetectable by humans. Code: https://github.com/koushiksrivats/faceattributeattack.


393
DartBlur: Privacy Preservation With Detection Artifact Suppression

Baowei Jiang · Bing Bai · Haozhe Lin · Yu Wang · Yuchen Guo · Lu Fang

Nowadays, privacy issue has become a top priority when training AI algorithms. Machine learning algorithms are expected to benefit our daily life, while personal information must also be carefully protected from exposure. Facial information is particularly sensitive in this regard. Multiple datasets containing facial information have been taken offline, and the community is actively seeking solutions to remedy the privacy issues. Existing methods for privacy preservation can be divided into blur-based and face replacement-based methods. Owing to the advantages of review convenience and good accessibility, blur-based based methods have become a dominant choice in practice. However, blur-based methods would inevitably introduce training artifacts harmful to the performance of downstream tasks. In this paper, we propose a novel De-artifact Blurring(DartBlur) privacy-preserving method, which capitalizes on a DNN architecture to generate blurred faces. DartBlur can effectively hide facial privacy information while detection artifacts are simultaneously suppressed. We have designed four training objectives that particularly aim to improve review convenience and maximize detection artifact suppression. We associate the algorithm with an adversarial training strategy with a second-order optimization pipeline. Experimental results demonstrate that DartBlur outperforms the existing face-replacement method from both perspectives of review convenience and accessibility, and also shows an exclusive advantage in suppressing the training artifact compared to traditional blur-based methods. Our implementation is available at https://github.com/JaNg2333/DartBlur.